[PATCH v1 1/1] ASoC: Intel: catpt: Carefully use PCI bitwise constants

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

PM constants for PCI devices are defined with bitwise annotation.
When used as is, sparse complains about that:

  .../catpt/dsp.c:390:9: warning: restricted pci_power_t degrades to integer
  .../catpt/dsp.c:414:9: warning: restricted pci_power_t degrades to integer

Force them to be u32 in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 sound/soc/intel/catpt/dsp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/intel/catpt/dsp.c b/sound/soc/intel/catpt/dsp.c
index 346bec000306..5454c6d9ab5b 100644
--- a/sound/soc/intel/catpt/dsp.c
+++ b/sound/soc/intel/catpt/dsp.c
@@ -387,7 +387,7 @@ int catpt_dsp_power_down(struct catpt_dev *cdev)
 	mask = cdev->spec->d3srampgd_bit | cdev->spec->d3pgd_bit;
 	catpt_updatel_pci(cdev, VDRTCTL0, mask, cdev->spec->d3pgd_bit);
 
-	catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, PCI_D3hot);
+	catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, (__force u32)PCI_D3hot);
 	/* give hw time to drop off */
 	udelay(50);
 
@@ -411,7 +411,7 @@ int catpt_dsp_power_up(struct catpt_dev *cdev)
 	val = mask & (~CATPT_VDRTCTL2_DTCGE);
 	catpt_updatel_pci(cdev, VDRTCTL2, mask, val);
 
-	catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, PCI_D0);
+	catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, (__force u32)PCI_D0);
 
 	/* SRAM power gating none */
 	mask = cdev->spec->d3srampgd_bit | cdev->spec->d3pgd_bit;
-- 
2.43.0.rc1.1.gbec44491f096