From: Arnd Bergmann <arnd@kernel.org>
To: llvm@lists.linux.dev, Hannes Reinecke <hare@kernel.org>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
Nathan Chancellor <nathan@kernel.org>,
Nick Desaulniers <ndesaulniers@google.com>,
Bill Wendling <morbo@google.com>,
Justin Stitt <justinstitt@google.com>,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 7/9] scsi: mylex: fix sysfs buffer lengths
Date: Tue, 26 Mar 2024 23:38:06 +0100 [thread overview]
Message-ID: <20240326223825.4084412-8-arnd@kernel.org> (raw)
In-Reply-To: <20240326223825.4084412-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
The myrb and myrs drivers use an odd way of implementing their sysfs files,
calling snprintf() with a fixed length of 32 bytes to print into a page
sized buffer. One of the strings is actually longer than 32 bytes, which
clang can warn about:
drivers/scsi/myrb.c:1906:10: error: 'snprintf' will always be truncated; specified size is 32, but format string expands to at least 34 [-Werror,-Wformat-truncation]
drivers/scsi/myrs.c:1089:10: error: 'snprintf' will always be truncated; specified size is 32, but format string expands to at least 34 [-Werror,-Wformat-truncation]
These could all be plain sprintf() without a length as the buffer is
always long enough. On the other hand, sysfs files should not be overly
long either, so just double the length to make sure the longest strings
don't get truncated here.
Fixes: 77266186397c ("scsi: myrs: Add Mylex RAID controller (SCSI interface)")
Fixes: 081ff398c56c ("scsi: myrb: Add Mylex RAID controller (block interface)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/scsi/myrb.c | 20 ++++++++++----------
drivers/scsi/myrs.c | 24 ++++++++++++------------
2 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/scsi/myrb.c b/drivers/scsi/myrb.c
index ca2e932dd9b7..f684eb5e0489 100644
--- a/drivers/scsi/myrb.c
+++ b/drivers/scsi/myrb.c
@@ -1775,9 +1775,9 @@ static ssize_t raid_state_show(struct device *dev,
name = myrb_devstate_name(ldev_info->state);
if (name)
- ret = snprintf(buf, 32, "%s\n", name);
+ ret = snprintf(buf, 64, "%s\n", name);
else
- ret = snprintf(buf, 32, "Invalid (%02X)\n",
+ ret = snprintf(buf, 64, "Invalid (%02X)\n",
ldev_info->state);
} else {
struct myrb_pdev_state *pdev_info = sdev->hostdata;
@@ -1796,9 +1796,9 @@ static ssize_t raid_state_show(struct device *dev,
else
name = myrb_devstate_name(pdev_info->state);
if (name)
- ret = snprintf(buf, 32, "%s\n", name);
+ ret = snprintf(buf, 64, "%s\n", name);
else
- ret = snprintf(buf, 32, "Invalid (%02X)\n",
+ ret = snprintf(buf, 64, "Invalid (%02X)\n",
pdev_info->state);
}
return ret;
@@ -1886,11 +1886,11 @@ static ssize_t raid_level_show(struct device *dev,
name = myrb_raidlevel_name(ldev_info->raid_level);
if (!name)
- return snprintf(buf, 32, "Invalid (%02X)\n",
+ return snprintf(buf, 64, "Invalid (%02X)\n",
ldev_info->state);
- return snprintf(buf, 32, "%s\n", name);
+ return snprintf(buf, 64, "%s\n", name);
}
- return snprintf(buf, 32, "Physical Drive\n");
+ return snprintf(buf, 64, "Physical Drive\n");
}
static DEVICE_ATTR_RO(raid_level);
@@ -1903,15 +1903,15 @@ static ssize_t rebuild_show(struct device *dev,
unsigned char status;
if (sdev->channel < myrb_logical_channel(sdev->host))
- return snprintf(buf, 32, "physical device - not rebuilding\n");
+ return snprintf(buf, 64, "physical device - not rebuilding\n");
status = myrb_get_rbld_progress(cb, &rbld_buf);
if (rbld_buf.ldev_num != sdev->id ||
status != MYRB_STATUS_SUCCESS)
- return snprintf(buf, 32, "not rebuilding\n");
+ return snprintf(buf, 64, "not rebuilding\n");
- return snprintf(buf, 32, "rebuilding block %u of %u\n",
+ return snprintf(buf, 64, "rebuilding block %u of %u\n",
rbld_buf.ldev_size - rbld_buf.blocks_left,
rbld_buf.ldev_size);
}
diff --git a/drivers/scsi/myrs.c b/drivers/scsi/myrs.c
index a1eec65a9713..e824be9d9bbb 100644
--- a/drivers/scsi/myrs.c
+++ b/drivers/scsi/myrs.c
@@ -947,9 +947,9 @@ static ssize_t raid_state_show(struct device *dev,
name = myrs_devstate_name(ldev_info->dev_state);
if (name)
- ret = snprintf(buf, 32, "%s\n", name);
+ ret = snprintf(buf, 64, "%s\n", name);
else
- ret = snprintf(buf, 32, "Invalid (%02X)\n",
+ ret = snprintf(buf, 64, "Invalid (%02X)\n",
ldev_info->dev_state);
} else {
struct myrs_pdev_info *pdev_info;
@@ -958,9 +958,9 @@ static ssize_t raid_state_show(struct device *dev,
pdev_info = sdev->hostdata;
name = myrs_devstate_name(pdev_info->dev_state);
if (name)
- ret = snprintf(buf, 32, "%s\n", name);
+ ret = snprintf(buf, 64, "%s\n", name);
else
- ret = snprintf(buf, 32, "Invalid (%02X)\n",
+ ret = snprintf(buf, 64, "Invalid (%02X)\n",
pdev_info->dev_state);
}
return ret;
@@ -1066,13 +1066,13 @@ static ssize_t raid_level_show(struct device *dev,
ldev_info = sdev->hostdata;
name = myrs_raid_level_name(ldev_info->raid_level);
if (!name)
- return snprintf(buf, 32, "Invalid (%02X)\n",
+ return snprintf(buf, 64, "Invalid (%02X)\n",
ldev_info->dev_state);
} else
name = myrs_raid_level_name(MYRS_RAID_PHYSICAL);
- return snprintf(buf, 32, "%s\n", name);
+ return snprintf(buf, 64, "%s\n", name);
}
static DEVICE_ATTR_RO(raid_level);
@@ -1086,7 +1086,7 @@ static ssize_t rebuild_show(struct device *dev,
unsigned char status;
if (sdev->channel < cs->ctlr_info->physchan_present)
- return snprintf(buf, 32, "physical device - not rebuilding\n");
+ return snprintf(buf, 64, "physical device - not rebuilding\n");
ldev_info = sdev->hostdata;
ldev_num = ldev_info->ldev_num;
@@ -1098,11 +1098,11 @@ static ssize_t rebuild_show(struct device *dev,
return -EIO;
}
if (ldev_info->rbld_active) {
- return snprintf(buf, 32, "rebuilding block %zu of %zu\n",
+ return snprintf(buf, 64, "rebuilding block %zu of %zu\n",
(size_t)ldev_info->rbld_lba,
(size_t)ldev_info->cfg_devsize);
} else
- return snprintf(buf, 32, "not rebuilding\n");
+ return snprintf(buf, 64, "not rebuilding\n");
}
static ssize_t rebuild_store(struct device *dev,
@@ -1190,7 +1190,7 @@ static ssize_t consistency_check_show(struct device *dev,
unsigned short ldev_num;
if (sdev->channel < cs->ctlr_info->physchan_present)
- return snprintf(buf, 32, "physical device - not checking\n");
+ return snprintf(buf, 64, "physical device - not checking\n");
ldev_info = sdev->hostdata;
if (!ldev_info)
@@ -1198,11 +1198,11 @@ static ssize_t consistency_check_show(struct device *dev,
ldev_num = ldev_info->ldev_num;
myrs_get_ldev_info(cs, ldev_num, ldev_info);
if (ldev_info->cc_active)
- return snprintf(buf, 32, "checking block %zu of %zu\n",
+ return snprintf(buf, 64, "checking block %zu of %zu\n",
(size_t)ldev_info->cc_lba,
(size_t)ldev_info->cfg_devsize);
else
- return snprintf(buf, 32, "not checking\n");
+ return snprintf(buf, 64, "not checking\n");
}
static ssize_t consistency_check_store(struct device *dev,
--
2.39.2
next prev parent reply other threads:[~2024-03-26 22:41 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-26 22:37 [PATCH 0/9] enabled -Wformat-truncation for clang Arnd Bergmann
2024-03-26 22:38 ` [PATCH 1/9] fbdev: shmobile: fix snprintf truncation Arnd Bergmann
2024-03-26 22:42 ` Laurent Pinchart
2024-03-27 8:13 ` Helge Deller
2024-03-26 22:38 ` [PATCH 2/9] enetc: avoid truncating error message Arnd Bergmann
2024-03-26 22:38 ` [PATCH 3/9] qed: avoid truncating work queue length Arnd Bergmann
2024-03-27 14:04 ` [EXTERNAL] " Subbaraya Sundeep Bhatta
2024-03-27 15:34 ` Arnd Bergmann
2024-03-27 17:08 ` Subbaraya Sundeep Bhatta
2024-03-26 22:38 ` [PATCH 4/9] mlx5: avoid truncating error message Arnd Bergmann
2024-03-27 14:08 ` [EXTERNAL] " Subbaraya Sundeep Bhatta
2024-03-26 22:38 ` [PATCH 5/9] surface3_power: avoid format string truncation warning Arnd Bergmann
2024-03-26 23:05 ` Nathan Chancellor
2024-03-27 10:58 ` Andy Shevchenko
2024-04-01 6:24 ` Uwe Kleine-König
2024-03-26 22:38 ` [PATCH 6/9] Input: IMS: fix printf string overflow Arnd Bergmann
2024-03-28 20:29 ` Dmitry Torokhov
2024-03-26 22:38 ` Arnd Bergmann [this message]
2024-03-27 7:40 ` [PATCH 7/9] scsi: mylex: fix sysfs buffer lengths Hannes Reinecke
2024-03-26 22:38 ` [PATCH 8/9] ALSA: aoa: avoid false-positive format truncation warning Arnd Bergmann
2024-03-27 9:54 ` Takashi Iwai
2024-03-26 22:38 ` [PATCH 9/9] kbuild: enable -Wformat-truncation on clang Arnd Bergmann
2024-03-27 0:47 ` [PATCH 0/9] enabled -Wformat-truncation for clang Jakub Kicinski
2024-03-29 19:30 ` patchwork-bot+netdevbpf
2024-04-02 1:48 ` (subset) " Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240326223825.4084412-8-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=arnd@arndb.de \
--cc=hare@kernel.org \
--cc=jejb@linux.ibm.com \
--cc=justinstitt@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=llvm@lists.linux.dev \
--cc=martin.petersen@oracle.com \
--cc=morbo@google.com \
--cc=nathan@kernel.org \
--cc=ndesaulniers@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox