[PATCH v5 7/7] iio: accel: adxl345: Add spi-3wire option

[Lothar Rubusch <l.rubusch@gmail.com>]

Add a setup function implementation to the spi module to enable spi-3wire
as option when specified in the device-tree.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
 drivers/iio/accel/adxl345.h     |  2 ++
 drivers/iio/accel/adxl345_spi.c | 12 +++++++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/accel/adxl345.h b/drivers/iio/accel/adxl345.h
index 4ea9341d4..e6bc3591c 100644
--- a/drivers/iio/accel/adxl345.h
+++ b/drivers/iio/accel/adxl345.h
@@ -30,6 +30,8 @@
 #define ADXL345_POWER_CTL_MEASURE	BIT(3)
 #define ADXL345_POWER_CTL_STANDBY	0x00
 
+#define ADXL345_DATA_FORMAT_SPI_3WIRE	BIT(6) /* 3-wire SPI mode */
+
 #define ADXL345_DATA_FORMAT_RANGE	GENMASK(1, 0) /* Set the g range */
 #define ADXL345_DATA_FORMAT_JUSTIFY	BIT(2) /* Left-justified (MSB) mode */
 #define ADXL345_DATA_FORMAT_FULL_RES	BIT(3) /* Up to 13-bits resolution */
diff --git a/drivers/iio/accel/adxl345_spi.c b/drivers/iio/accel/adxl345_spi.c
index 1c0513bd3..f145d5c1d 100644
--- a/drivers/iio/accel/adxl345_spi.c
+++ b/drivers/iio/accel/adxl345_spi.c
@@ -20,6 +20,16 @@ static const struct regmap_config adxl345_spi_regmap_config = {
 	.read_flag_mask = BIT(7) | BIT(6),
 };
 
+static int adxl345_spi_setup(struct device *dev, struct regmap *regmap)
+{
+	struct spi_device *spi = container_of(dev, struct spi_device, dev);
+
+	if (spi->mode & SPI_3WIRE)
+		return regmap_write(regmap, ADXL345_REG_DATA_FORMAT,
+				    ADXL345_DATA_FORMAT_SPI_3WIRE);
+	return 0;
+}
+
 static int adxl345_spi_probe(struct spi_device *spi)
 {
 	struct regmap *regmap;
@@ -33,7 +43,7 @@ static int adxl345_spi_probe(struct spi_device *spi)
 	if (IS_ERR(regmap))
 		return dev_err_probe(&spi->dev, PTR_ERR(regmap), "Error initializing regmap\n");
 
-	return adxl345_core_probe(&spi->dev, regmap, NULL);
+	return adxl345_core_probe(&spi->dev, regmap, adxl345_spi_setup);
 }
 
 static const struct adxl345_chip_info adxl345_spi_info = {
-- 
2.25.1