[PATCH v6 2/7] iio: accel: adxl345: Group bus configuration

[Lothar Rubusch <l.rubusch@gmail.com>]

Group the indio_dev initialization and bus configuration for improved
readability.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
 drivers/iio/accel/adxl345_core.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index f4dec5ff1..78ac6ea54 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -226,6 +226,12 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap)
 	if (!data->info)
 		return -ENODEV;
 
+	indio_dev->name = data->info->name;
+	indio_dev->info = &adxl345_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = adxl345_channels;
+	indio_dev->num_channels = ARRAY_SIZE(adxl345_channels);
+
 	/*
 	 * Only allow updates of bus independent bits to the data_format
 	 * register. Keep the bus specific pre-configuration.
@@ -241,12 +247,6 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap)
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to set data range\n");
 
-	indio_dev->name = data->info->name;
-	indio_dev->info = &adxl345_info;
-	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->channels = adxl345_channels;
-	indio_dev->num_channels = ARRAY_SIZE(adxl345_channels);
-
 	/* Enable measurement mode */
 	ret = adxl345_powerup(data->regmap);
 	if (ret < 0)
-- 
2.25.1