public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <mani@kernel.org>
To: Shashank Babu Chinta Venkata <quic_schintav@quicinc.com>
Cc: agross@kernel.org, andersson@kernel.org,
	konrad.dybcio@linaro.org, quic_msarkar@quicinc.com,
	quic_kraravin@quicinc.com,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Rob Herring" <robh@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Jingoo Han" <jingoohan1@gmail.com>,
	"Gustavo Pimentel" <gustavo.pimentel@synopsys.com>,
	"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
	"Serge Semin" <fancer.lancer@gmail.com>,
	"Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>,
	"Conor Dooley" <conor.dooley@microchip.com>,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
	linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v2 1/3] PCI: qcom: Refactor common code
Date: Tue, 2 Apr 2024 11:03:32 +0530	[thread overview]
Message-ID: <20240402053332.GI2933@thinkpad> (raw)
In-Reply-To: <20240320071527.13443-2-quic_schintav@quicinc.com>

On Wed, Mar 20, 2024 at 12:14:45AM -0700, Shashank Babu Chinta Venkata wrote:
> Refactor common code from RC(Root Complex) and EP(End Point)
> drivers and move them to a common repository. This acts as placeholder

s/repository/driver

> for common source code for both drivers avoiding duplication.

'thus avoiding'

> 
> Signed-off-by: Shashank Babu Chinta Venkata <quic_schintav@quicinc.com>
> ---
>  drivers/pci/controller/dwc/Kconfig         |  5 ++
>  drivers/pci/controller/dwc/Makefile        |  1 +
>  drivers/pci/controller/dwc/pcie-qcom-cmn.c | 81 ++++++++++++++++++++++

I'd prefer, pcie-qcom-common.c

>  drivers/pci/controller/dwc/pcie-qcom-cmn.h | 14 ++++
>  drivers/pci/controller/dwc/pcie-qcom-ep.c  | 39 ++---------
>  drivers/pci/controller/dwc/pcie-qcom.c     | 67 +++---------------
>  6 files changed, 113 insertions(+), 94 deletions(-)
>  create mode 100644 drivers/pci/controller/dwc/pcie-qcom-cmn.c
>  create mode 100644 drivers/pci/controller/dwc/pcie-qcom-cmn.h
> 
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index 8afacc90c63b..41d2746edc5f 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -265,12 +265,16 @@ config PCIE_DW_PLAT_EP
>  	  order to enable device-specific features PCI_DW_PLAT_EP must be
>  	  selected.
>  
> +config PCIE_QCOM_CMN

I'd prefer, 'PCIE_QCOM_COMMON'.

> +	bool
> +
>  config PCIE_QCOM
>  	bool "Qualcomm PCIe controller (host mode)"
>  	depends on OF && (ARCH_QCOM || COMPILE_TEST)
>  	depends on PCI_MSI
>  	select PCIE_DW_HOST
>  	select CRC8
> +	select PCIE_QCOM_CMN
>  	help
>  	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
>  	  PCIe controller uses the DesignWare core plus Qualcomm-specific
> @@ -281,6 +285,7 @@ config PCIE_QCOM_EP
>  	depends on OF && (ARCH_QCOM || COMPILE_TEST)
>  	depends on PCI_ENDPOINT
>  	select PCIE_DW_EP
> +	select PCIE_QCOM_CMN
>  	help
>  	  Say Y here to enable support for the PCIe controllers on Qualcomm SoCs
>  	  to work in endpoint mode. The PCIe controller uses the DesignWare core
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index bac103faa523..521572093ebf 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
>  obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
>  obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
>  obj-$(CONFIG_PCIE_QCOM_EP) += pcie-qcom-ep.o
> +obj-$(CONFIG_PCIE_QCOM_CMN) += pcie-qcom-cmn.o
>  obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
>  obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
>  obj-$(CONFIG_PCIE_ROCKCHIP_DW_HOST) += pcie-dw-rockchip.o
> diff --git a/drivers/pci/controller/dwc/pcie-qcom-cmn.c b/drivers/pci/controller/dwc/pcie-qcom-cmn.c
> new file mode 100644
> index 000000000000..64fa412ec293
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pcie-qcom-cmn.c
> @@ -0,0 +1,81 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2014-2015, 2020 The Linux Foundation. All rights reserved.
> + * Copyright 2015, 2021 Linaro Limited.

Copyright (c)

> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + *
> + */
> +
> +#include <linux/debugfs.h>

Why do you need this header in this patch?

> +#include <linux/pci.h>
> +#include <linux/interconnect.h>
> +
> +#include "../../pci.h"
> +#include "pcie-designware.h"
> +#include "pcie-qcom-cmn.h"
> +
> +#define QCOM_PCIE_LINK_SPEED_TO_BW(speed) \
> +		Mbps_to_icc(PCIE_SPEED2MBS_ENC(pcie_link_speed[speed]))
> +
> +int qcom_pcie_cmn_icc_get_resource(struct dw_pcie *pci, struct icc_path *icc_mem)

qcom_pcie_common_icc_get?

> +{
> +	if (IS_ERR(pci))
> +		return PTR_ERR(pci);

Why this check is needed?

> +
> +	icc_mem = devm_of_icc_get(pci->dev, "pcie-mem");
> +	if (IS_ERR(icc_mem))
> +		return PTR_ERR(icc_mem);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(qcom_pcie_cmn_icc_get_resource);
> +
> +int qcom_pcie_cmn_icc_init(struct dw_pcie *pci, struct icc_path *icc_mem)

qcom_pcie_common_icc_init?

> +{
> +	int ret;
> +
> +	if (IS_ERR(pci))
> +		return PTR_ERR(pci);
> +

Again, why this is needed?

> +	if (IS_ERR(icc_mem))
> +		return PTR_ERR(icc_mem);
> +

If 'devm_of_icc_get' has failed previously we wouldn't reach here. And also,
there is no need to check for NULL since the ICC core already does that.

> +	/*
> +	 * Some Qualcomm platforms require interconnect bandwidth constraints
> +	 * to be set before enabling interconnect clocks.
> +	 *
> +	 * Set an initial peak bandwidth corresponding to single-lane Gen 1
> +	 * for the pcie-mem path.
> +	 */
> +	ret = icc_set_bw(icc_mem, 0, QCOM_PCIE_LINK_SPEED_TO_BW(1));
> +	if (ret) {
> +		dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
> +			ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(qcom_pcie_cmn_icc_init);
> +
> +void qcom_pcie_cmn_icc_update(struct dw_pcie *pci, struct icc_path *icc_mem)

qcom_pcie_common_icc_update?

> +{
> +	u32 offset, status;
> +	int speed, width;
> +	int ret;
> +
> +	if (!icc_mem)
> +		return;
> +
> +	offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> +	status = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
> +

You can keep the link check here since that should work for both RC and EP.

> +	speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
> +	width = FIELD_GET(PCI_EXP_LNKSTA_NLW, status);
> +
> +	ret = icc_set_bw(icc_mem, 0, width * QCOM_PCIE_LINK_SPEED_TO_BW(speed));
> +	if (ret)
> +		dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
> +			ret);
> +}
> +EXPORT_SYMBOL_GPL(qcom_pcie_cmn_icc_update);
> diff --git a/drivers/pci/controller/dwc/pcie-qcom-cmn.h b/drivers/pci/controller/dwc/pcie-qcom-cmn.h
> new file mode 100644
> index 000000000000..845eda23ae59
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pcie-qcom-cmn.h
> @@ -0,0 +1,14 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2014-2015, 2020 The Linux Foundation. All rights reserved.
> + * Copyright 2015, 2021 Linaro Limited.
> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/pci.h>
> +#include "../../pci.h"
> +#include "pcie-designware.h"

Again, headers should be included only if it is used in the same file itself.

- Mani

-- 
மணிவண்ணன் சதாசிவம்

  reply	other threads:[~2024-04-02  5:33 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-20  7:14 [PATCH v2 0/3] Add Gen4 equalization and margining settings Shashank Babu Chinta Venkata
2024-03-20  7:14 ` [PATCH v2 1/3] PCI: qcom: Refactor common code Shashank Babu Chinta Venkata
2024-04-02  5:33   ` Manivannan Sadhasivam [this message]
2024-07-12  8:12   ` Johan Hovold
2024-03-20  7:14 ` [PATCH v2 2/3] PCI: qcom: Add equalization settings for gen4 Shashank Babu Chinta Venkata
2024-03-23  0:22   ` Konrad Dybcio
2024-04-02  5:45   ` Manivannan Sadhasivam
2024-03-20  7:14 ` [PATCH v2 3/3] PCI: qcom: Add rx margining " Shashank Babu Chinta Venkata
2024-03-23  0:24   ` Konrad Dybcio
2024-04-02  5:47   ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240402053332.GI2933@thinkpad \
    --to=mani@kernel.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=conor.dooley@microchip.com \
    --cc=fancer.lancer@gmail.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=konrad.dybcio@linaro.org \
    --cc=kw@linux.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=quic_kraravin@quicinc.com \
    --cc=quic_msarkar@quicinc.com \
    --cc=quic_schintav@quicinc.com \
    --cc=robh@kernel.org \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox