From: kan.liang@linux.intel.com
To: peterz@infradead.org, mingo@redhat.com, acme@kernel.org,
namhyung@kernel.org, irogers@google.com, adrian.hunter@intel.com,
alexander.shishkin@linux.intel.com, linux-kernel@vger.kernel.org
Cc: ak@linux.intel.com, Kan Liang <kan.liang@linux.intel.com>
Subject: [PATCH 1/4] perf/x86/intel/uncore: Factor out common MMIO init and ops functions
Date: Thu, 4 Apr 2024 07:17:03 -0700 [thread overview]
Message-ID: <20240404141706.1235531-2-kan.liang@linux.intel.com> (raw)
In-Reply-To: <20240404141706.1235531-1-kan.liang@linux.intel.com>
From: Kan Liang <kan.liang@linux.intel.com>
Some uncore PMON registers are located in the MMIO space. For the client
machine, the MMIO space is usually located at D0:F0 but in a different
BAR. For example, some uncore PMON registers are located in the SAF BAR,
not the MCHBAR in the Lunar Lake.
The current __uncore_imc_init_box() hard code the BAR information.
Factor out the uncore_get_box_mmio_addr() which uses the BAR information
as a parameter.
The only change is the error output message. The hardcode name 'MCHBAR'
is replaced by the offset of a BAR.
Add a new macro, MMIO_UNCORE_COMMON_OPS(), since the MMIO ops functions
are usually the same among different generations.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
---
arch/x86/events/intel/uncore_snb.c | 47 +++++++++++++++++++-----------
1 file changed, 30 insertions(+), 17 deletions(-)
diff --git a/arch/x86/events/intel/uncore_snb.c b/arch/x86/events/intel/uncore_snb.c
index 9462fd9f3b7a..05fe6e90bd8e 100644
--- a/arch/x86/events/intel/uncore_snb.c
+++ b/arch/x86/events/intel/uncore_snb.c
@@ -1481,33 +1481,35 @@ static struct pci_dev *tgl_uncore_get_mc_dev(void)
#define TGL_UNCORE_MMIO_IMC_MEM_OFFSET 0x10000
#define TGL_UNCORE_PCI_IMC_MAP_SIZE 0xe000
-static void __uncore_imc_init_box(struct intel_uncore_box *box,
- unsigned int base_offset)
+static void
+uncore_get_box_mmio_addr(struct intel_uncore_box *box,
+ unsigned int base_offset,
+ int bar_offset, int step)
{
struct pci_dev *pdev = tgl_uncore_get_mc_dev();
struct intel_uncore_pmu *pmu = box->pmu;
struct intel_uncore_type *type = pmu->type;
resource_size_t addr;
- u32 mch_bar;
+ u32 bar;
if (!pdev) {
pr_warn("perf uncore: Cannot find matched IMC device.\n");
return;
}
- pci_read_config_dword(pdev, SNB_UNCORE_PCI_IMC_BAR_OFFSET, &mch_bar);
- /* MCHBAR is disabled */
- if (!(mch_bar & BIT(0))) {
- pr_warn("perf uncore: MCHBAR is disabled. Failed to map IMC free-running counters.\n");
+ pci_read_config_dword(pdev, bar_offset, &bar);
+ if (!(bar & BIT(0))) {
+ pr_warn("perf uncore: BAR 0x%x is disabled. Failed to map %s counters.\n",
+ bar_offset, type->name);
pci_dev_put(pdev);
return;
}
- mch_bar &= ~BIT(0);
- addr = (resource_size_t)(mch_bar + TGL_UNCORE_MMIO_IMC_MEM_OFFSET * pmu->pmu_idx);
+ bar &= ~BIT(0);
+ addr = (resource_size_t)(bar + step * pmu->pmu_idx);
#ifdef CONFIG_PHYS_ADDR_T_64BIT
- pci_read_config_dword(pdev, SNB_UNCORE_PCI_IMC_BAR_OFFSET + 4, &mch_bar);
- addr |= ((resource_size_t)mch_bar << 32);
+ pci_read_config_dword(pdev, bar_offset + 4, &bar);
+ addr |= ((resource_size_t)bar << 32);
#endif
addr += base_offset;
@@ -1518,6 +1520,14 @@ static void __uncore_imc_init_box(struct intel_uncore_box *box,
pci_dev_put(pdev);
}
+static void __uncore_imc_init_box(struct intel_uncore_box *box,
+ unsigned int base_offset)
+{
+ uncore_get_box_mmio_addr(box, base_offset,
+ SNB_UNCORE_PCI_IMC_BAR_OFFSET,
+ TGL_UNCORE_MMIO_IMC_MEM_OFFSET);
+}
+
static void tgl_uncore_imc_freerunning_init_box(struct intel_uncore_box *box)
{
__uncore_imc_init_box(box, 0);
@@ -1612,14 +1622,17 @@ static void adl_uncore_mmio_enable_box(struct intel_uncore_box *box)
writel(0, box->io_addr + uncore_mmio_box_ctl(box));
}
+#define MMIO_UNCORE_COMMON_OPS() \
+ .exit_box = uncore_mmio_exit_box, \
+ .disable_box = adl_uncore_mmio_disable_box, \
+ .enable_box = adl_uncore_mmio_enable_box, \
+ .disable_event = intel_generic_uncore_mmio_disable_event, \
+ .enable_event = intel_generic_uncore_mmio_enable_event, \
+ .read_counter = uncore_mmio_read_counter,
+
static struct intel_uncore_ops adl_uncore_mmio_ops = {
.init_box = adl_uncore_imc_init_box,
- .exit_box = uncore_mmio_exit_box,
- .disable_box = adl_uncore_mmio_disable_box,
- .enable_box = adl_uncore_mmio_enable_box,
- .disable_event = intel_generic_uncore_mmio_disable_event,
- .enable_event = intel_generic_uncore_mmio_enable_event,
- .read_counter = uncore_mmio_read_counter,
+ MMIO_UNCORE_COMMON_OPS()
};
#define ADL_UNC_CTL_CHMASK_MASK 0x00000f00
--
2.35.1
next prev parent reply other threads:[~2024-04-04 14:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-04 14:17 [PATCH 0/4] Support Lunar Lake and Arrow Lake uncore PMU kan.liang
2024-04-04 14:17 ` kan.liang [this message]
2024-04-04 14:17 ` [PATCH 2/4] perf/x86/intel/uncore: Add Lunar Lake and Arrow Lake support kan.liang
2024-04-04 14:17 ` [PATCH 3/4] perf/x86/intel/uncore: Add LNL uncore iMC freerunning support kan.liang
2024-04-04 14:17 ` [PATCH 4/4] perf/x86/intel/uncore: Use D0:F0 as a default device kan.liang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240404141706.1235531-2-kan.liang@linux.intel.com \
--to=kan.liang@linux.intel.com \
--cc=acme@kernel.org \
--cc=adrian.hunter@intel.com \
--cc=ak@linux.intel.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=irogers@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=namhyung@kernel.org \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox