[PATCH v8 03/13] crypto: ecdsa - Adjust tests on length of key parameters

[Stefan Berger <stefanb@linux.ibm.com>]

In preparation for support of NIST P521, adjust the basic tests on the
length of the provided key parameters to only ensure that the length of the
x plus y coordinates parameter array is not an odd number and that each
coordinate fits into an array of 'ndigits' digits. Mathematical tests on
the key's parameters are then done in ecc_is_pubkey_valid_full rejecting
invalid keys.

The change is necessary since NIST P521 keys do not have keys with
coordinates that each require 'full' digits (= all bits in u64 used).
NIST P521 only requires 2 bytes (9 bits) in the most significant digit
unlike NIST P192/256/384 that each require multiple 'full' digits.

Tested-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
---
 crypto/ecdsa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/crypto/ecdsa.c b/crypto/ecdsa.c
index e819d0983bd3..9462a4d640a7 100644
--- a/crypto/ecdsa.c
+++ b/crypto/ecdsa.c
@@ -230,7 +230,7 @@ static int ecdsa_set_pub_key(struct crypto_akcipher *tfm, const void *key, unsig
 	if (ret < 0)
 		return ret;
 
-	if (keylen < 1 || (((keylen - 1) >> 1) % sizeof(u64)) != 0)
+	if (keylen < 1 || ((keylen - 1) & 1) != 0)
 		return -EINVAL;
 	/* we only accept uncompressed format indicated by '4' */
 	if (d[0] != 4)
-- 
2.43.0