From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: Dan Williams <dan.j.williams@intel.com>
Cc: Kwangjin Ko <kwangjin.ko@sk.com>, <dave@stgolabs.net>,
<dave.jiang@intel.com>, <alison.schofield@intel.com>,
<vishal.l.verma@intel.com>, <ira.weiny@intel.com>,
<linux-cxl@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<kernel_team@skhynix.com>
Subject: Re: [PATCH v2 1/1] cxl/core: Fix initialization of mbox_cmd.size_out in get event
Date: Thu, 4 Apr 2024 14:30:49 +0100 [thread overview]
Message-ID: <20240404143049.00005635@Huawei.com> (raw)
In-Reply-To: <660d6d64a50bd_7702a29466@dwillia2-xfh.jf.intel.com.notmuch>
On Wed, 3 Apr 2024 07:53:24 -0700
Dan Williams <dan.j.williams@intel.com> wrote:
> Kwangjin Ko wrote:
> > Since mbox_cmd.size_out is overwritten with the actual output size in
> > the function below, it needs to be initialized every time.
> >
> > cxl_internal_send_cmd -> __cxl_pci_mbox_send_cmd
> >
> > Problem scenario:
> >
> > 1) The size_out variable is initially set to the size of the mailbox.
> > 2) Read an event.
> > - size_out is set to 160 bytes(header 32B + one event 128B).
> > - Two event are created while reading.
> > 3) Read the new *two* events.
> > - size_out is still set to 160 bytes.
> > - Although the value of out_len is 288 bytes, only 160 bytes are
> > copied from the mailbox register to the local variable.
> > - record_count is set to 2.
> > - Accessing records[1] will result in reading incorrect data.
> >
> > Signed-off-by: Kwangjin Ko <kwangjin.ko@sk.com>
> > ---
> > drivers/cxl/core/mbox.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
> > index 9adda4795eb7..a38531a055c8 100644
> > --- a/drivers/cxl/core/mbox.c
> > +++ b/drivers/cxl/core/mbox.c
> > @@ -958,13 +958,14 @@ static void cxl_mem_get_records_log(struct cxl_memdev_state *mds,
> > .payload_in = &log_type,
> > .size_in = sizeof(log_type),
> > .payload_out = payload,
> > - .size_out = mds->payload_size,
> > .min_out = struct_size(payload, records, 0),
> > };
> >
> > do {
> > int rc, i;
> >
> > + mbox_cmd.size_out = mds->payload_size;
> > +
>
> Fix looks correct, but I am concerned it is a band-aid for a more
> general problem. For example, if I am not mistaken, we have a similar
> bug in cxl_mem_get_poison().
>
> So perhaps a convention to always define @mbox_cmd immediately before
> cxl_internal_send_cmd() like this:
Makes sense to me. These aren't hot paths, so safe code is worth the
possible extra writes.
>
> diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
> index 9adda4795eb7..5d44b5c095b7 100644
> --- a/drivers/cxl/core/mbox.c
> +++ b/drivers/cxl/core/mbox.c
> @@ -946,24 +946,22 @@ static void cxl_mem_get_records_log(struct cxl_memdev_state *mds,
> struct cxl_memdev *cxlmd = mds->cxlds.cxlmd;
> struct device *dev = mds->cxlds.dev;
> struct cxl_get_event_payload *payload;
> - struct cxl_mbox_cmd mbox_cmd;
> u8 log_type = type;
> u16 nr_rec;
>
> mutex_lock(&mds->event.log_lock);
> payload = mds->event.buf;
>
> - mbox_cmd = (struct cxl_mbox_cmd) {
> - .opcode = CXL_MBOX_OP_GET_EVENT_RECORD,
> - .payload_in = &log_type,
> - .size_in = sizeof(log_type),
> - .payload_out = payload,
> - .size_out = mds->payload_size,
> - .min_out = struct_size(payload, records, 0),
> - };
> -
> do {
> int rc, i;
> + struct cxl_mbox_cmd mbox_cmd = (struct cxl_mbox_cmd){
> + .opcode = CXL_MBOX_OP_GET_EVENT_RECORD,
> + .payload_in = &log_type,
> + .size_in = sizeof(log_type),
> + .payload_out = payload,
> + .size_out = mds->payload_size,
> + .min_out = struct_size(payload, records, 0),
> + };
>
> rc = cxl_internal_send_cmd(mds, &mbox_cmd);
> if (rc) {
> @@ -1296,7 +1294,6 @@ int cxl_mem_get_poison(struct cxl_memdev *cxlmd, u64 offset, u64 len,
> struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlmd->cxlds);
> struct cxl_mbox_poison_out *po;
> struct cxl_mbox_poison_in pi;
> - struct cxl_mbox_cmd mbox_cmd;
> int nr_records = 0;
> int rc;
>
> @@ -1308,16 +1305,16 @@ int cxl_mem_get_poison(struct cxl_memdev *cxlmd, u64 offset, u64 len,
> pi.offset = cpu_to_le64(offset);
> pi.length = cpu_to_le64(len / CXL_POISON_LEN_MULT);
>
> - mbox_cmd = (struct cxl_mbox_cmd) {
> - .opcode = CXL_MBOX_OP_GET_POISON,
> - .size_in = sizeof(pi),
> - .payload_in = &pi,
> - .size_out = mds->payload_size,
> - .payload_out = po,
> - .min_out = struct_size(po, record, 0),
> - };
> -
> do {
> + struct cxl_mbox_cmd mbox_cmd = (struct cxl_mbox_cmd){
> + .opcode = CXL_MBOX_OP_GET_POISON,
> + .size_in = sizeof(pi),
> + .payload_in = &pi,
> + .size_out = mds->payload_size,
> + .payload_out = po,
> + .min_out = struct_size(po, record, 0),
> + };
> +
> rc = cxl_internal_send_cmd(mds, &mbox_cmd);
> if (rc)
> break;
>
next prev parent reply other threads:[~2024-04-04 13:30 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-02 8:14 [PATCH v2 0/1] cxl/core: Fix initialization of mbox_cmd.size_out in get event Kwangjin Ko
2024-04-02 8:14 ` [PATCH v2 1/1] " Kwangjin Ko
2024-04-02 14:38 ` Jonathan Cameron
2024-04-02 16:25 ` Ira Weiny
2024-04-03 14:53 ` Dan Williams
2024-04-04 13:30 ` Jonathan Cameron [this message]
2024-04-04 17:35 ` Dan Williams
2024-04-04 20:20 ` Ira Weiny
2024-04-05 16:04 ` Alison Schofield
2024-04-05 16:40 ` Jonathan Cameron
2024-04-05 17:37 ` Alison Schofield
2024-04-05 17:45 ` Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240404143049.00005635@Huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=kernel_team@skhynix.com \
--cc=kwangjin.ko@sk.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox