[PATCH v2 2/2] hwmon: (pwm-fan) Make use of device properties

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Add mod_devicetable.h include.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/hwmon/Kconfig   |  2 +-
 drivers/hwmon/pwm-fan.c | 21 ++++++++++-----------
 2 files changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 83945397b6eb..960539bd40ab 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1778,7 +1778,7 @@ config SENSORS_PT5161L
 
 config SENSORS_PWM_FAN
 	tristate "PWM fan"
-	depends on (PWM && OF) || COMPILE_TEST
+	depends on PWM || COMPILE_TEST
 	depends on THERMAL || THERMAL=n
 	help
 	  If you say yes here you get support for fans connected to PWM lines.
diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index bf902610cd07..a1712649b07e 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -9,10 +9,11 @@
 
 #include <linux/hwmon.h>
 #include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/pwm.h>
 #include <linux/regulator/consumer.h>
 #include <linux/sysfs.h>
@@ -421,16 +422,14 @@ static const struct thermal_cooling_device_ops pwm_fan_cooling_ops = {
 	.set_cur_state = pwm_fan_set_cur_state,
 };
 
-static int pwm_fan_of_get_cooling_data(struct device *dev,
-				       struct pwm_fan_ctx *ctx)
+static int pwm_fan_get_cooling_data(struct device *dev, struct pwm_fan_ctx *ctx)
 {
-	struct device_node *np = dev->of_node;
 	int num, i, ret;
 
-	if (!of_property_present(np, "cooling-levels"))
+	if (!device_property_present(dev, "cooling-levels"))
 		return 0;
 
-	ret = of_property_count_u32_elems(np, "cooling-levels");
+	ret = device_property_count_u32(dev, "cooling-levels");
 	if (ret <= 0) {
 		dev_err(dev, "Wrong data!\n");
 		return ret ? : -EINVAL;
@@ -442,8 +441,8 @@ static int pwm_fan_of_get_cooling_data(struct device *dev,
 	if (!ctx->pwm_fan_cooling_levels)
 		return -ENOMEM;
 
-	ret = of_property_read_u32_array(np, "cooling-levels",
-					 ctx->pwm_fan_cooling_levels, num);
+	ret = device_property_read_u32_array(dev, "cooling-levels",
+					     ctx->pwm_fan_cooling_levels, num);
 	if (ret) {
 		dev_err(dev, "Property 'cooling-levels' cannot be read!\n");
 		return ret;
@@ -574,8 +573,8 @@ static int pwm_fan_probe(struct platform_device *pdev)
 		for (i = 0; i < ctx->tach_count; i++)
 			ctx->pulses_per_revolution[i] = 2;
 
-		of_property_read_u32_array(dev->of_node, "pulses-per-revolution",
-					   ctx->pulses_per_revolution, ctx->tach_count);
+		device_property_read_u32_array(dev, "pulses-per-revolution",
+					       ctx->pulses_per_revolution, ctx->tach_count);
 	}
 
 	channels = devm_kcalloc(dev, channel_count + 1,
@@ -630,7 +629,7 @@ static int pwm_fan_probe(struct platform_device *pdev)
 		return PTR_ERR(hwmon);
 	}
 
-	ret = pwm_fan_of_get_cooling_data(dev, ctx);
+	ret = pwm_fan_get_cooling_data(dev, ctx);
 	if (ret)
 		return ret;
 
-- 
2.43.0.rc1.1.gbec44491f096