From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-kselftest@vger.kernel.org,
"Reinette Chatre" <reinette.chatre@intel.com>,
"Shuah Khan" <shuah@kernel.org>,
"Babu Moger" <babu.moger@amd.com>,
"Maciej Wieczór-Retman" <maciej.wieczor-retman@intel.com>
Cc: "Fenghua Yu" <fenghua.yu@intel.com>,
linux-kernel@vger.kernel.org,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v3 12/16] selftests/resctrl: Simplify bandwidth report type handling
Date: Mon, 8 Apr 2024 19:32:43 +0300 [thread overview]
Message-ID: <20240408163247.3224-13-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20240408163247.3224-1-ilpo.jarvinen@linux.intel.com>
bw_report is only needed for selecting the correct value from the
values IMC measured. It is a member in the resctrl_val_param struct and
is always set to "reads". The value is then checked in resctrl_val()
using validate_bw_report_request() that besides validating the input,
assumes it can mutate the string which is questionable programming
practice.
Simplify handling bw_report:
- Convert validate_bw_report_request() into get_bw_report_type() that
inputs and returns const char *. Use NULL to indicate error.
- Validate the report types inside measure_mem_bw(), not in
resctrl_val().
- As resctrl_val() no longer needs bw_report for anything, it can just
be passed to measure_mem_bw() by the ->measure() hooks.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
v2:
- Rebased on top of next to resolve conflict in resctrl.h
---
tools/testing/selftests/resctrl/mba_test.c | 3 +--
tools/testing/selftests/resctrl/mbm_test.c | 3 +--
tools/testing/selftests/resctrl/resctrl.h | 7 +++----
tools/testing/selftests/resctrl/resctrl_val.c | 19 +++++++++----------
tools/testing/selftests/resctrl/resctrlfs.c | 13 ++++++-------
5 files changed, 20 insertions(+), 25 deletions(-)
diff --git a/tools/testing/selftests/resctrl/mba_test.c b/tools/testing/selftests/resctrl/mba_test.c
index 0a95c42f1616..9c9a4f22e529 100644
--- a/tools/testing/selftests/resctrl/mba_test.c
+++ b/tools/testing/selftests/resctrl/mba_test.c
@@ -67,7 +67,7 @@ static int mba_setup(const struct resctrl_test *test,
static int mba_measure(const struct user_params *uparams,
struct resctrl_val_param *param, pid_t bm_pid)
{
- return measure_mem_bw(uparams, param, bm_pid);
+ return measure_mem_bw(uparams, param, bm_pid, "reads");
}
static bool show_mba_info(unsigned long *bw_imc, unsigned long *bw_resc)
@@ -168,7 +168,6 @@ static int mba_run_test(const struct resctrl_test *test, const struct user_param
.ctrlgrp = "c1",
.mongrp = "m1",
.filename = RESULT_FILE_NAME,
- .bw_report = "reads",
.init = mba_init,
.setup = mba_setup,
.measure = mba_measure,
diff --git a/tools/testing/selftests/resctrl/mbm_test.c b/tools/testing/selftests/resctrl/mbm_test.c
index 90716917e6ef..0a3ab99b31ab 100644
--- a/tools/testing/selftests/resctrl/mbm_test.c
+++ b/tools/testing/selftests/resctrl/mbm_test.c
@@ -121,7 +121,7 @@ static int mbm_setup(const struct resctrl_test *test,
static int mbm_measure(const struct user_params *uparams,
struct resctrl_val_param *param, pid_t bm_pid)
{
- return measure_mem_bw(uparams, param, bm_pid);
+ return measure_mem_bw(uparams, param, bm_pid, "reads");
}
static void mbm_test_cleanup(void)
@@ -136,7 +136,6 @@ static int mbm_run_test(const struct resctrl_test *test, const struct user_param
.ctrlgrp = "c1",
.mongrp = "m1",
.filename = RESULT_FILE_NAME,
- .bw_report = "reads",
.init = mbm_init,
.setup = mbm_setup,
.measure = mbm_measure,
diff --git a/tools/testing/selftests/resctrl/resctrl.h b/tools/testing/selftests/resctrl/resctrl.h
index d3fbb957309d..4446a0e493ef 100644
--- a/tools/testing/selftests/resctrl/resctrl.h
+++ b/tools/testing/selftests/resctrl/resctrl.h
@@ -85,7 +85,6 @@ struct resctrl_test {
* @ctrlgrp: Name of the control monitor group (con_mon grp)
* @mongrp: Name of the monitor group (mon grp)
* @filename: Name of file to which the o/p should be written
- * @bw_report: Bandwidth report type (reads vs writes)
* @init: Callback function to initialize test environment
* @setup: Callback function to setup per test run environment
* @measure: Callback that performs the measurement (a single test)
@@ -95,7 +94,6 @@ struct resctrl_val_param {
char ctrlgrp[64];
char mongrp[64];
char filename[64];
- char *bw_report;
unsigned long mask;
int num_of_runs;
int (*init)(const struct resctrl_val_param *param,
@@ -135,7 +133,7 @@ int filter_dmesg(void);
int get_domain_id(const char *resource, int cpu_no, int *domain_id);
int mount_resctrlfs(void);
int umount_resctrlfs(void);
-int validate_bw_report_request(char *bw_report);
+const char *get_bw_report_type(const char *bw_report);
bool resctrl_resource_exists(const char *resource);
bool resctrl_mon_feature_exists(const char *resource, const char *feature);
bool resource_info_file_exists(const char *resource, const char *file);
@@ -154,7 +152,8 @@ void fill_cache_read(unsigned char *buf, size_t buf_size, bool once);
int run_fill_buf(size_t buf_size, int memflush, int op, bool once);
int initialize_mem_bw_imc(void);
int measure_mem_bw(const struct user_params *uparams,
- struct resctrl_val_param *param, pid_t bm_pid);
+ struct resctrl_val_param *param, pid_t bm_pid,
+ const char *bw_report);
void initialize_mem_bw_resctrl(const struct resctrl_val_param *param,
int domain_id);
int resctrl_val(const struct resctrl_test *test,
diff --git a/tools/testing/selftests/resctrl/resctrl_val.c b/tools/testing/selftests/resctrl/resctrl_val.c
index d289c17f1f03..a9e0bb35a4ab 100644
--- a/tools/testing/selftests/resctrl/resctrl_val.c
+++ b/tools/testing/selftests/resctrl/resctrl_val.c
@@ -338,7 +338,7 @@ static void do_imc_mem_bw_test(void)
*
* Return: = 0 on success. < 0 on failure.
*/
-static int get_mem_bw_imc(char *bw_report, float *bw_imc)
+static int get_mem_bw_imc(const char *bw_report, float *bw_imc)
{
float reads, writes, of_mul_read, of_mul_write;
int imc;
@@ -550,14 +550,20 @@ static int print_results_bw(char *filename, pid_t bm_pid, float bw_imc,
* @uparams: User supplied parameters
* @param: parameters passed to resctrl_val()
* @bm_pid: PID that runs the benchmark
+ * @bw_report: Bandwidth report type (reads, writes)
*/
int measure_mem_bw(const struct user_params *uparams,
- struct resctrl_val_param *param, pid_t bm_pid)
+ struct resctrl_val_param *param, pid_t bm_pid,
+ const char *bw_report)
{
unsigned long bw_resc, bw_resc_start, bw_resc_end;
float bw_imc;
int ret;
+ bw_report = get_bw_report_type(bw_report);
+ if (!bw_report)
+ return -1;
+
/*
* Measure memory bandwidth from resctrl and from
* another source which is perf imc value or could
@@ -579,7 +585,7 @@ int measure_mem_bw(const struct user_params *uparams,
if (ret < 0)
return ret;
- ret = get_mem_bw_imc(param->bw_report, &bw_imc);
+ ret = get_mem_bw_imc(bw_report, &bw_imc);
if (ret < 0)
return ret;
@@ -674,13 +680,6 @@ int resctrl_val(const struct resctrl_test *test,
return ret;
}
- if (!strncmp(resctrl_val, MBA_STR, sizeof(MBA_STR)) ||
- !strncmp(resctrl_val, MBM_STR, sizeof(MBM_STR))) {
- ret = validate_bw_report_request(param->bw_report);
- if (ret)
- return ret;
- }
-
/*
* If benchmark wasn't successfully started by child, then child should
* kill parent, so save parent's pid
diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c
index 9b86f826a40c..aac382eaa032 100644
--- a/tools/testing/selftests/resctrl/resctrlfs.c
+++ b/tools/testing/selftests/resctrl/resctrlfs.c
@@ -837,22 +837,21 @@ int filter_dmesg(void)
return 0;
}
-int validate_bw_report_request(char *bw_report)
+const char *get_bw_report_type(const char *bw_report)
{
if (strcmp(bw_report, "reads") == 0)
- return 0;
+ return bw_report;
if (strcmp(bw_report, "writes") == 0)
- return 0;
+ return bw_report;
if (strcmp(bw_report, "nt-writes") == 0) {
- strcpy(bw_report, "writes");
- return 0;
+ return "writes";
}
if (strcmp(bw_report, "total") == 0)
- return 0;
+ return bw_report;
fprintf(stderr, "Requested iMC bandwidth report type unavailable\n");
- return -1;
+ return NULL;
}
int perf_event_open(struct perf_event_attr *hw_event, pid_t pid, int cpu,
--
2.39.2
next prev parent reply other threads:[~2024-04-08 16:34 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-08 16:32 [PATCH v3 00/16] selftests/resctrl: resctrl_val() related cleanups & improvements Ilpo Järvinen
2024-04-08 16:32 ` [PATCH v3 01/16] selftests/resctrl: Open get_mem_bw_imc() fd for loops Ilpo Järvinen
2024-04-25 4:37 ` Reinette Chatre
2024-04-08 16:32 ` [PATCH v3 02/16] selftests/resctrl: Calculate resctrl FS derived mem bw over sleep(1) only Ilpo Järvinen
2024-04-25 4:38 ` Reinette Chatre
2024-04-08 16:32 ` [PATCH v3 03/16] selftests/resctrl: Fix closing IMC fds on error Ilpo Järvinen
2024-04-08 16:32 ` [PATCH v3 04/16] selftests/resctrl: Make "bandwidth" consistent in comments & prints Ilpo Järvinen
2024-04-08 16:32 ` [PATCH v3 05/16] selftests/resctrl: Consolidate get_domain_id() into resctrl_val() Ilpo Järvinen
2024-04-08 16:32 ` [PATCH v3 06/16] selftests/resctrl: Use correct type for pids Ilpo Järvinen
2024-04-08 16:32 ` [PATCH v3 07/16] selftests/resctrl: Cleanup bm_pid and ppid usage & limit scope Ilpo Järvinen
2024-04-25 4:37 ` Reinette Chatre
2024-04-08 16:32 ` [PATCH v3 08/16] selftests/resctrl: Rename measure_vals() to measure_mem_bw_vals() & document Ilpo Järvinen
2024-04-08 16:32 ` [PATCH v3 09/16] selftests/resctrl: Simplify mem bandwidth file code for MBA & MBM tests Ilpo Järvinen
2024-04-25 4:38 ` Reinette Chatre
2024-04-08 16:32 ` [PATCH v3 10/16] selftests/resctrl: Add ->measure() callback to resctrl_val_param Ilpo Järvinen
2024-04-08 16:32 ` [PATCH v3 11/16] selftests/resctrl: Add ->init() callback into resctrl_val_param Ilpo Järvinen
2024-04-25 4:39 ` Reinette Chatre
2024-04-08 16:32 ` Ilpo Järvinen [this message]
2024-04-08 16:32 ` [PATCH v3 13/16] selftests/resctrl: Make some strings passed to resctrlfs functions const Ilpo Järvinen
2024-04-08 16:32 ` [PATCH v3 14/16] selftests/resctrl: Convert ctrlgrp & mongrp to pointers Ilpo Järvinen
2024-04-08 16:32 ` [PATCH v3 15/16] selftests/resctrl: Remove mongrp from MBA test Ilpo Järvinen
2024-04-08 16:32 ` [PATCH v3 16/16] selftests/resctrl: Remove test name comparing from write_bm_pid_to_resctrl() Ilpo Järvinen
2024-04-24 13:49 ` [PATCH v3 00/16] selftests/resctrl: resctrl_val() related cleanups & improvements Shuah Khan
2024-04-25 4:46 ` Reinette Chatre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240408163247.3224-13-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=babu.moger@amd.com \
--cc=fenghua.yu@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=maciej.wieczor-retman@intel.com \
--cc=reinette.chatre@intel.com \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox