From: "Asbjørn Sloth Tønnesen" <ast@fiberby.net>
To: Raju Rangoju <rajur@chelsio.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: "Asbjørn Sloth Tønnesen" <ast@fiberby.net>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next] cxgb4: flower: use NL_SET_ERR_MSG_MOD for validation errors
Date: Mon, 8 Apr 2024 16:55:04 +0000 [thread overview]
Message-ID: <20240408165506.94483-1-ast@fiberby.net> (raw)
Replace netdev_{warn,err} with NL_SET_ERR_MSG_{FMT_,}MOD
to better inform the user about the problem.
Only compile-tested, no access to HW.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
---
.../ethernet/chelsio/cxgb4/cxgb4_tc_flower.c | 64 +++++++++----------
1 file changed, 30 insertions(+), 34 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c
index 72ac4a34424b9..3a6987cafe590 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c
@@ -305,7 +305,7 @@ static void cxgb4_process_flow_match(struct net_device *dev,
fs->mask.iport = ~0;
}
-static int cxgb4_validate_flow_match(struct net_device *dev,
+static int cxgb4_validate_flow_match(struct netlink_ext_ack *extack,
struct flow_rule *rule)
{
struct flow_dissector *dissector = rule->match.dissector;
@@ -321,8 +321,9 @@ static int cxgb4_validate_flow_match(struct net_device *dev,
BIT_ULL(FLOW_DISSECTOR_KEY_ENC_KEYID) |
BIT_ULL(FLOW_DISSECTOR_KEY_VLAN) |
BIT_ULL(FLOW_DISSECTOR_KEY_IP))) {
- netdev_warn(dev, "Unsupported key used: 0x%llx\n",
- dissector->used_keys);
+ NL_SET_ERR_MSG_FMT_MOD(extack,
+ "Unsupported key used: 0x%llx",
+ dissector->used_keys);
return -EOPNOTSUPP;
}
@@ -339,13 +340,15 @@ static int cxgb4_validate_flow_match(struct net_device *dev,
struct flow_match_ip match;
if (eth_ip_type != ETH_P_IP && eth_ip_type != ETH_P_IPV6) {
- netdev_err(dev, "IP Key supported only with IPv4/v6");
+ NL_SET_ERR_MSG_MOD(extack,
+ "IP Key supported only with IPv4/v6");
return -EINVAL;
}
flow_rule_match_ip(rule, &match);
if (match.mask->ttl) {
- netdev_warn(dev, "ttl match unsupported for offload");
+ NL_SET_ERR_MSG_MOD(extack,
+ "ttl match unsupported for offload");
return -EOPNOTSUPP;
}
}
@@ -576,7 +579,7 @@ static bool valid_l4_mask(u32 mask)
return hi && lo ? false : true;
}
-static bool valid_pedit_action(struct net_device *dev,
+static bool valid_pedit_action(struct netlink_ext_ack *extack,
const struct flow_action_entry *act,
u8 *natmode_flags)
{
@@ -595,8 +598,7 @@ static bool valid_pedit_action(struct net_device *dev,
case PEDIT_ETH_SMAC_47_16:
break;
default:
- netdev_err(dev, "%s: Unsupported pedit field\n",
- __func__);
+ NL_SET_ERR_MSG_MOD(extack, "Unsupported pedit field");
return false;
}
break;
@@ -609,8 +611,7 @@ static bool valid_pedit_action(struct net_device *dev,
*natmode_flags |= CXGB4_ACTION_NATMODE_DIP;
break;
default:
- netdev_err(dev, "%s: Unsupported pedit field\n",
- __func__);
+ NL_SET_ERR_MSG_MOD(extack, "Unsupported pedit field");
return false;
}
break;
@@ -629,8 +630,7 @@ static bool valid_pedit_action(struct net_device *dev,
*natmode_flags |= CXGB4_ACTION_NATMODE_DIP;
break;
default:
- netdev_err(dev, "%s: Unsupported pedit field\n",
- __func__);
+ NL_SET_ERR_MSG_MOD(extack, "Unsupported pedit field");
return false;
}
break;
@@ -638,8 +638,8 @@ static bool valid_pedit_action(struct net_device *dev,
switch (offset) {
case PEDIT_TCP_SPORT_DPORT:
if (!valid_l4_mask(~mask)) {
- netdev_err(dev, "%s: Unsupported mask for TCP L4 ports\n",
- __func__);
+ NL_SET_ERR_MSG_MOD(extack,
+ "Unsupported mask for TCP L4 ports");
return false;
}
if (~mask & PEDIT_TCP_UDP_SPORT_MASK)
@@ -648,8 +648,7 @@ static bool valid_pedit_action(struct net_device *dev,
*natmode_flags |= CXGB4_ACTION_NATMODE_DPORT;
break;
default:
- netdev_err(dev, "%s: Unsupported pedit field\n",
- __func__);
+ NL_SET_ERR_MSG_MOD(extack, "Unsupported pedit field");
return false;
}
break;
@@ -657,8 +656,8 @@ static bool valid_pedit_action(struct net_device *dev,
switch (offset) {
case PEDIT_UDP_SPORT_DPORT:
if (!valid_l4_mask(~mask)) {
- netdev_err(dev, "%s: Unsupported mask for UDP L4 ports\n",
- __func__);
+ NL_SET_ERR_MSG_MOD(extack,
+ "Unsupported mask for UDP L4 ports");
return false;
}
if (~mask & PEDIT_TCP_UDP_SPORT_MASK)
@@ -667,13 +666,12 @@ static bool valid_pedit_action(struct net_device *dev,
*natmode_flags |= CXGB4_ACTION_NATMODE_DPORT;
break;
default:
- netdev_err(dev, "%s: Unsupported pedit field\n",
- __func__);
+ NL_SET_ERR_MSG_MOD(extack, "Unsupported pedit field");
return false;
}
break;
default:
- netdev_err(dev, "%s: Unsupported pedit type\n", __func__);
+ NL_SET_ERR_MSG_MOD(extack, "Unsupported pedit type");
return false;
}
return true;
@@ -727,8 +725,7 @@ int cxgb4_validate_flow_actions(struct net_device *dev,
* the provided output port is not valid
*/
if (!found) {
- netdev_err(dev, "%s: Out port invalid\n",
- __func__);
+ NL_SET_ERR_MSG_MOD(extack, "Out port invalid");
return -EINVAL;
}
act_redir = true;
@@ -745,21 +742,21 @@ int cxgb4_validate_flow_actions(struct net_device *dev,
case FLOW_ACTION_VLAN_PUSH:
case FLOW_ACTION_VLAN_MANGLE:
if (proto != ETH_P_8021Q) {
- netdev_err(dev, "%s: Unsupported vlan proto\n",
- __func__);
+ NL_SET_ERR_MSG_MOD(extack,
+ "Unsupported vlan proto");
return -EOPNOTSUPP;
}
break;
default:
- netdev_err(dev, "%s: Unsupported vlan action\n",
- __func__);
+ NL_SET_ERR_MSG_MOD(extack,
+ "Unsupported vlan action");
return -EOPNOTSUPP;
}
act_vlan = true;
}
break;
case FLOW_ACTION_MANGLE: {
- bool pedit_valid = valid_pedit_action(dev, act,
+ bool pedit_valid = valid_pedit_action(extack, act,
&natmode_flags);
if (!pedit_valid)
@@ -771,14 +768,14 @@ int cxgb4_validate_flow_actions(struct net_device *dev,
/* Do nothing. cxgb4_set_filter will validate */
break;
default:
- netdev_err(dev, "%s: Unsupported action\n", __func__);
+ NL_SET_ERR_MSG_MOD(extack, "Unsupported action");
return -EOPNOTSUPP;
}
}
if ((act_pedit || act_vlan) && !act_redir) {
- netdev_err(dev, "%s: pedit/vlan rewrite invalid without egress redirect\n",
- __func__);
+ NL_SET_ERR_MSG_MOD(extack,
+ "pedit/vlan rewrite invalid without egress redirect");
return -EINVAL;
}
@@ -864,7 +861,7 @@ int cxgb4_flow_rule_replace(struct net_device *dev, struct flow_rule *rule,
if (cxgb4_validate_flow_actions(dev, &rule->action, extack, 0))
return -EOPNOTSUPP;
- if (cxgb4_validate_flow_match(dev, rule))
+ if (cxgb4_validate_flow_match(extack, rule))
return -EOPNOTSUPP;
cxgb4_process_flow_match(dev, rule, fs);
@@ -901,8 +898,7 @@ int cxgb4_flow_rule_replace(struct net_device *dev, struct flow_rule *rule,
init_completion(&ctx.completion);
ret = __cxgb4_set_filter(dev, fidx, fs, &ctx);
if (ret) {
- netdev_err(dev, "%s: filter creation err %d\n",
- __func__, ret);
+ NL_SET_ERR_MSG_FMT_MOD(extack, "filter creation err %d", ret);
return ret;
}
--
2.43.0
next reply other threads:[~2024-04-08 16:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-08 16:55 Asbjørn Sloth Tønnesen [this message]
2024-04-10 0:11 ` [PATCH net-next] cxgb4: flower: use NL_SET_ERR_MSG_MOD for validation errors Jacob Keller
2024-04-10 0:30 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240408165506.94483-1-ast@fiberby.net \
--to=ast@fiberby.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rajur@chelsio.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox