From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>,
Hugo Villeneuve <hvilleneuve@dimonoff.com>
Subject: [PATCH v3 7/8] serial: max3100: Extract to_max3100_port() helper macro
Date: Tue, 9 Apr 2024 17:45:54 +0300 [thread overview]
Message-ID: <20240409144721.638326-8-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20240409144721.638326-1-andriy.shevchenko@linux.intel.com>
Instead of using container_of() explicitly, introduce a helper macro.
This saves a lot of lines of code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
drivers/tty/serial/max3100.c | 67 ++++++++++--------------------------
1 file changed, 19 insertions(+), 48 deletions(-)
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index db543eaa39c8..4e7cd037cfc2 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -16,6 +16,7 @@
/* 4 MAX3100s should be enough for everyone */
#define MAX_MAX3100 4
+#include <linux/container_of.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/device.h>
@@ -110,6 +111,8 @@ struct max3100_port {
struct timer_list timer;
};
+#define to_max3100_port(port) container_of(port, struct max3100_port, port)
+
static struct max3100_port *max3100s[MAX_MAX3100]; /* the chips */
static DEFINE_MUTEX(max3100s_lock); /* race on probe */
@@ -320,9 +323,7 @@ static irqreturn_t max3100_irq(int irqno, void *dev_id)
static void max3100_enable_ms(struct uart_port *port)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
mod_timer(&s->timer, jiffies);
dev_dbg(&s->spi->dev, "%s\n", __func__);
@@ -330,9 +331,7 @@ static void max3100_enable_ms(struct uart_port *port)
static void max3100_start_tx(struct uart_port *port)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
dev_dbg(&s->spi->dev, "%s\n", __func__);
@@ -341,9 +340,7 @@ static void max3100_start_tx(struct uart_port *port)
static void max3100_stop_rx(struct uart_port *port)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
dev_dbg(&s->spi->dev, "%s\n", __func__);
@@ -357,9 +354,7 @@ static void max3100_stop_rx(struct uart_port *port)
static unsigned int max3100_tx_empty(struct uart_port *port)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
dev_dbg(&s->spi->dev, "%s\n", __func__);
@@ -370,9 +365,7 @@ static unsigned int max3100_tx_empty(struct uart_port *port)
static unsigned int max3100_get_mctrl(struct uart_port *port)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
dev_dbg(&s->spi->dev, "%s\n", __func__);
@@ -384,9 +377,7 @@ static unsigned int max3100_get_mctrl(struct uart_port *port)
static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
int loopback, rts;
dev_dbg(&s->spi->dev, "%s\n", __func__);
@@ -412,9 +403,7 @@ static void
max3100_set_termios(struct uart_port *port, struct ktermios *termios,
const struct ktermios *old)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
unsigned int baud = port->uartclk / 16;
unsigned int baud230400 = (baud == 230400) ? 1 : 0;
unsigned cflag;
@@ -530,9 +519,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
static void max3100_shutdown(struct uart_port *port)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
u16 rx;
dev_dbg(&s->spi->dev, "%s\n", __func__);
@@ -557,9 +544,7 @@ static void max3100_shutdown(struct uart_port *port)
static int max3100_startup(struct uart_port *port)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
char b[12];
int ret;
@@ -605,9 +590,7 @@ static int max3100_startup(struct uart_port *port)
static const char *max3100_type(struct uart_port *port)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
dev_dbg(&s->spi->dev, "%s\n", __func__);
@@ -616,18 +599,14 @@ static const char *max3100_type(struct uart_port *port)
static void max3100_release_port(struct uart_port *port)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
dev_dbg(&s->spi->dev, "%s\n", __func__);
}
static void max3100_config_port(struct uart_port *port, int flags)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
dev_dbg(&s->spi->dev, "%s\n", __func__);
@@ -638,9 +617,7 @@ static void max3100_config_port(struct uart_port *port, int flags)
static int max3100_verify_port(struct uart_port *port,
struct serial_struct *ser)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
int ret = -EINVAL;
dev_dbg(&s->spi->dev, "%s\n", __func__);
@@ -652,18 +629,14 @@ static int max3100_verify_port(struct uart_port *port,
static void max3100_stop_tx(struct uart_port *port)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
dev_dbg(&s->spi->dev, "%s\n", __func__);
}
static int max3100_request_port(struct uart_port *port)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
dev_dbg(&s->spi->dev, "%s\n", __func__);
return 0;
@@ -671,9 +644,7 @@ static int max3100_request_port(struct uart_port *port)
static void max3100_break_ctl(struct uart_port *port, int break_state)
{
- struct max3100_port *s = container_of(port,
- struct max3100_port,
- port);
+ struct max3100_port *s = to_max3100_port(port);
dev_dbg(&s->spi->dev, "%s\n", __func__);
}
--
2.43.0.rc1.1.gbec44491f096
next prev parent reply other threads:[~2024-04-09 14:47 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-09 14:45 [PATCH v3 0/8] serial: max3100: Put into shape Andy Shevchenko
2024-04-09 14:45 ` [PATCH v3 1/8] serial: max3100: Enable TIOCM_LOOP Andy Shevchenko
2024-04-09 14:45 ` [PATCH v3 2/8] serial: max3100: Get crystal frequency via device property Andy Shevchenko
2024-04-09 14:45 ` [PATCH v3 3/8] serial: max3100: Remove duplicating irq field Andy Shevchenko
2024-04-09 14:45 ` [PATCH v3 4/8] serial: max3100: Switch to use dev_err_probe() Andy Shevchenko
2024-04-09 14:45 ` [PATCH v3 5/8] serial: max3100: Replace MODULE_ALIAS() with respective ID tables Andy Shevchenko
2024-04-09 14:45 ` [PATCH v3 6/8] serial: max3100: Switch to DEFINE_SIMPLE_DEV_PM_OPS() Andy Shevchenko
2024-04-09 14:45 ` Andy Shevchenko [this message]
2024-04-10 7:17 ` [PATCH v3 7/8] serial: max3100: Extract to_max3100_port() helper macro Jiri Slaby
2024-04-10 13:55 ` Andy Shevchenko
2024-04-09 14:45 ` [PATCH v3 8/8] serial: max3100: Sort headers Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240409144721.638326-8-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=hvilleneuve@dimonoff.com \
--cc=jirislaby@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox