[PATCH v2 1/5] bus: ti-sysc: Move check for no-reset-on-init

[Tony Lindgren <tony@atomide.com>]

We are wrongly checking SYSC_QUIRK_NO_RESET_ON_INIT flag in sysc_reset(),
it can be called also after init from sysc_reinit_module(). Let's fix the
issue by moving the check to the init code.

Fixes: 6a52bc2b81fa ("bus: ti-sysc: Add quirk handling for reset on re-init")
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -2145,8 +2145,7 @@ static int sysc_reset(struct sysc *ddata)
 	sysc_offset = ddata->offsets[SYSC_SYSCONFIG];
 
 	if (ddata->legacy_mode ||
-	    ddata->cap->regbits->srst_shift < 0 ||
-	    ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT)
+	    ddata->cap->regbits->srst_shift < 0)
 		return 0;
 
 	sysc_mask = BIT(ddata->cap->regbits->srst_shift);
@@ -2240,12 +2239,14 @@ static int sysc_init_module(struct sysc *ddata)
 			goto err_main_clocks;
 	}
 
-	error = sysc_reset(ddata);
-	if (error)
-		dev_err(ddata->dev, "Reset failed with %d\n", error);
+	if (!(ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT)) {
+		error = sysc_reset(ddata);
+		if (error)
+			dev_err(ddata->dev, "Reset failed with %d\n", error);
 
-	if (error && !ddata->legacy_mode)
-		sysc_disable_module(ddata->dev);
+		if (error && !ddata->legacy_mode)
+			sysc_disable_module(ddata->dev);
+	}
 
 err_main_clocks:
 	if (error)
-- 
2.44.0