From: Lee Jones <lee@kernel.org>
To: Andreas Kemnade <andreas@kemnade.info>
Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, mazziesaccount@gmail.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/2] mfd: rohm-bd71828: Add power off functionality
Date: Thu, 11 Apr 2024 12:50:47 +0100 [thread overview]
Message-ID: <20240411115047.GI1980182@google.com> (raw)
In-Reply-To: <20240402111700.494004-3-andreas@kemnade.info>
On Tue, 02 Apr 2024, Andreas Kemnade wrote:
> Since the chip can power off the system, add the corresponding
> functionality.
> Based on https://github.com/kobolabs/Kobo-Reader/raw/master/hw/imx6sll-clara2e/kernel.tar.bz2
>
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
> ---
> drivers/mfd/rohm-bd71828.c | 36 +++++++++++++++++++++++++++++++-
> include/linux/mfd/rohm-bd71828.h | 3 +++
> 2 files changed, 38 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mfd/rohm-bd71828.c b/drivers/mfd/rohm-bd71828.c
> index 594718f7e8e1..4a1fa8a0d76a 100644
> --- a/drivers/mfd/rohm-bd71828.c
> +++ b/drivers/mfd/rohm-bd71828.c
> @@ -464,6 +464,27 @@ static int set_clk_mode(struct device *dev, struct regmap *regmap,
> OUT32K_MODE_CMOS);
> }
>
> +static struct i2c_client *bd71828_dev;
> +static void bd71828_power_off(void)
> +{
> + while (true) {
> + s32 val;
> +
> + /* We are not allowed to sleep, so do not use regmap involving mutexes here. */
> + val = i2c_smbus_read_byte_data(bd71828_dev, BD71828_REG_PS_CTRL_1);
> + if (val >= 0)
> + i2c_smbus_write_byte_data(bd71828_dev,
> + BD71828_REG_PS_CTRL_1,
> + BD71828_MASK_STATE_HBNT | (u8)val);
> + mdelay(500);
> + }
> +}
> +
> +static void bd71828_remove_poweroff(void *data)
> +{
> + pm_power_off = NULL;
> +}
> +
> static int bd71828_i2c_probe(struct i2c_client *i2c)
> {
> struct regmap_irq_chip_data *irq_data;
> @@ -542,7 +563,20 @@ static int bd71828_i2c_probe(struct i2c_client *i2c)
> ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, mfd, cells,
> NULL, 0, regmap_irq_get_domain(irq_data));
> if (ret)
> - dev_err_probe(&i2c->dev, ret, "Failed to create subdevices\n");
> + return dev_err_probe(&i2c->dev, ret, "Failed to create subdevices\n");
> +
> + if (of_device_is_system_power_controller(i2c->dev.of_node) &&
> + chip_type == ROHM_CHIP_TYPE_BD71828) {
> + if (!pm_power_off) {
> + bd71828_dev = i2c;
> + pm_power_off = bd71828_power_off;
> + ret = devm_add_action_or_reset(&i2c->dev,
> + bd71828_remove_poweroff,
> + NULL);
> + } else {
> + dev_warn(&i2c->dev, "Poweroff callback already assigned\n");
> + }
> + }
>
> return ret;
> }
> diff --git a/include/linux/mfd/rohm-bd71828.h b/include/linux/mfd/rohm-bd71828.h
> index 3b5f3a7db4bd..9776fde1262d 100644
> --- a/include/linux/mfd/rohm-bd71828.h
> +++ b/include/linux/mfd/rohm-bd71828.h
> @@ -4,6 +4,7 @@
> #ifndef __LINUX_MFD_BD71828_H__
> #define __LINUX_MFD_BD71828_H__
>
> +#include <linux/bits.h>
> #include <linux/mfd/rohm-generic.h>
> #include <linux/mfd/rohm-shared.h>
>
> @@ -41,6 +42,8 @@ enum {
> #define BD71828_REG_PS_CTRL_2 0x05
> #define BD71828_REG_PS_CTRL_3 0x06
>
> +#define BD71828_MASK_STATE_HBNT BIT(1)
> +
> //#define BD71828_REG_SWRESET 0x06
How did this get in here?
> #define BD71828_MASK_RUN_LVL_CTRL 0x30
>
> --
> 2.39.2
>
--
Lee Jones [李琼斯]
next prev parent reply other threads:[~2024-04-11 11:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-02 11:16 [PATCH v3 0/2] mfd: rohm-bd71828: Add power off Andreas Kemnade
2024-04-02 11:16 ` [PATCH v3 1/2] dt-bindings: mfd: Add ROHM BD71828 system-power-controller property Andreas Kemnade
2024-04-02 13:15 ` Matti Vaittinen
2024-04-02 11:17 ` [PATCH v3 2/2] mfd: rohm-bd71828: Add power off functionality Andreas Kemnade
2024-04-11 11:50 ` Lee Jones [this message]
2024-04-11 12:14 ` Matti Vaittinen
2024-04-11 14:07 ` Lee Jones
2024-04-11 11:51 ` [PATCH v3 0/2] mfd: rohm-bd71828: Add power off Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240411115047.GI1980182@google.com \
--to=lee@kernel.org \
--cc=andreas@kemnade.info \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mazziesaccount@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox