From: "Jason A. Donenfeld" <Jason@zx2c4.com>
To: tytso@mit.edu, robh@kernel.org, krzk@kernel.org,
conor+dt@kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, sudanl@amazon.com, graf@amazon.com,
dwmw@amazon.co.uk, krzysztof.kozlowski@linaro.org,
bchalios@amazon.es
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Subject: [PATCH v8 3/3] virt: vmgenid: add support for devicetree bindings
Date: Sat, 20 Apr 2024 00:40:00 +0200 [thread overview]
Message-ID: <20240419224020.780377-4-Jason@zx2c4.com> (raw)
In-Reply-To: <20240419224020.780377-1-Jason@zx2c4.com>
From: Sudan Landge <sudanl@amazon.com>
Extend the vmgenid platform driver to support devicetree bindings. With
this support, hypervisors can send vmgenid notifications to the virtual
machine without the need to enable ACPI. The bindings are located at:
Documentation/devicetree/bindings/rng/microsoft,vmgenid.yaml
Since this is no longer ACPI-dependent, remove the dependency from
Kconfig and protect the ACPI code with a single ifdef.
Signed-off-by: Sudan Landge <sudanl@amazon.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
[Jason: - Small style cleanups and refactoring.
- Re-work ACPI conditionalization. ]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
drivers/virt/Kconfig | 1 -
drivers/virt/vmgenid.c | 53 ++++++++++++++++++++++++++++++++++++++++--
2 files changed, 51 insertions(+), 3 deletions(-)
diff --git a/drivers/virt/Kconfig b/drivers/virt/Kconfig
index 40129b6f0eca..d8c848cf09a6 100644
--- a/drivers/virt/Kconfig
+++ b/drivers/virt/Kconfig
@@ -16,7 +16,6 @@ if VIRT_DRIVERS
config VMGENID
tristate "Virtual Machine Generation ID driver"
default y
- depends on ACPI
help
Say Y here to use the hypervisor-provided Virtual Machine Generation ID
to reseed the RNG when the VM is cloned. This is highly recommended if
diff --git a/drivers/virt/vmgenid.c b/drivers/virt/vmgenid.c
index 0522107f9bee..66135eac3abf 100644
--- a/drivers/virt/vmgenid.c
+++ b/drivers/virt/vmgenid.c
@@ -2,12 +2,13 @@
/*
* Copyright (C) 2022 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
*
- * The "Virtual Machine Generation ID" is exposed via ACPI and changes when a
+ * The "Virtual Machine Generation ID" is exposed via ACPI or DT and changes when a
* virtual machine forks or is cloned. This driver exists for shepherding that
* information to random.c.
*/
#include <linux/acpi.h>
+#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -41,6 +42,7 @@ static void setup_vmgenid_state(struct vmgenid_state *state, void *virt_addr)
add_device_randomness(state->this_id, sizeof(state->this_id));
}
+#ifdef CONFIG_ACPI
static void vmgenid_acpi_handler(acpi_handle __always_unused handle,
u32 __always_unused event, void *dev)
{
@@ -92,6 +94,43 @@ static int vmgenid_add_acpi(struct device *dev, struct vmgenid_state *state)
ACPI_FREE(parsed.pointer);
return ret;
}
+#else
+static int vmgenid_add_acpi(struct device *dev, struct vmgenid_state *state)
+{
+ return -EINVAL;
+}
+#endif
+
+static irqreturn_t vmgenid_of_irq_handler(int __always_unused irq, void *dev)
+{
+ vmgenid_notify(dev);
+ return IRQ_HANDLED;
+}
+
+static int vmgenid_add_of(struct platform_device *pdev,
+ struct vmgenid_state *state)
+{
+ void *virt_addr;
+ int ret;
+
+ virt_addr = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+ if (IS_ERR(virt_addr))
+ return PTR_ERR(virt_addr);
+
+ setup_vmgenid_state(state, virt_addr);
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_request_irq(&pdev->dev, ret, vmgenid_of_irq_handler,
+ IRQF_SHARED, "vmgenid", &pdev->dev);
+ if (ret < 0)
+ return ret;
+
+ pdev->dev.driver_data = state;
+ return 0;
+}
static int vmgenid_add(struct platform_device *pdev)
{
@@ -103,13 +142,22 @@ static int vmgenid_add(struct platform_device *pdev)
if (!state)
return -ENOMEM;
- ret = vmgenid_add_acpi(dev, state);
+ if (dev->of_node)
+ ret = vmgenid_add_of(pdev, state);
+ else
+ ret = vmgenid_add_acpi(dev, state);
if (ret < 0)
devm_kfree(dev, state);
return ret;
}
+static const struct of_device_id vmgenid_of_ids[] = {
+ { .compatible = "microsoft,vmgenid", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, vmgenid_of_ids);
+
static const struct acpi_device_id vmgenid_acpi_ids[] = {
{ "VMGENCTR", 0 },
{ "VM_GEN_COUNTER", 0 },
@@ -122,6 +170,7 @@ static struct platform_driver vmgenid_plaform_driver = {
.driver = {
.name = "vmgenid",
.acpi_match_table = vmgenid_acpi_ids,
+ .of_match_table = vmgenid_of_ids,
},
};
--
2.44.0
next prev parent reply other threads:[~2024-04-19 22:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-19 22:39 [PATCH v8 0/3] virt: vmgenid: add devicetree bindings support Jason A. Donenfeld
2024-04-19 22:39 ` [PATCH v8 1/3] virt: vmgenid: change implementation to use a platform driver Jason A. Donenfeld
2024-04-19 22:39 ` [PATCH v8 2/3] dt-bindings: rng: Add vmgenid support Jason A. Donenfeld
2024-04-19 22:40 ` Jason A. Donenfeld [this message]
2024-04-22 13:29 ` [PATCH v8 0/3] virt: vmgenid: add devicetree bindings support Babis Chalios
2024-04-27 0:41 ` Jason A. Donenfeld
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240419224020.780377-4-Jason@zx2c4.com \
--to=jason@zx2c4.com \
--cc=bchalios@amazon.es \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dwmw@amazon.co.uk \
--cc=graf@amazon.com \
--cc=krzk@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sudanl@amazon.com \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox