public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Sebastian Ott <sebott@redhat.com>
To: linux-arm-kernel@lists.infradead.org, kvmarm@lists.linux.dev,
	linux-kernel@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>,
	Oliver Upton <oliver.upton@linux.dev>,
	James Morse <james.morse@arm.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>
Subject: [PATCH v2 2/6] KVM: arm64: unify trap setup code
Date: Fri, 26 Apr 2024 12:49:46 +0200	[thread overview]
Message-ID: <20240426104950.7382-3-sebott@redhat.com> (raw)
In-Reply-To: <20240426104950.7382-1-sebott@redhat.com>

There are 2 functions to set up traps via HCR_EL2:
* kvm_init_sysreg() called via KVM_RUN (before the 1st run or when
  the pid changes)
* vcpu_reset_hcr() called via KVM_ARM_VCPU_INIT

To unify these 2 and to support traps that are dependent on the
ID register configuration, move vcpu_reset_hcr() to sys_regs.c
and call it via kvm_init_sysreg().

While at it rename kvm_init_sysreg() to kvm_setup_traps() to
better reflect what it's doing.

Signed-off-by: Sebastian Ott <sebott@redhat.com>
---
 arch/arm64/include/asm/kvm_emulate.h | 37 -----------------------
 arch/arm64/include/asm/kvm_host.h    |  2 +-
 arch/arm64/kvm/arm.c                 |  3 +-
 arch/arm64/kvm/sys_regs.c            | 44 ++++++++++++++++++++++++++--
 4 files changed, 44 insertions(+), 42 deletions(-)

diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index 975af30af31f..9e71fcbb033d 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -67,43 +67,6 @@ static __always_inline bool vcpu_el1_is_32bit(struct kvm_vcpu *vcpu)
 }
 #endif
 
-static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
-{
-	vcpu->arch.hcr_el2 = HCR_GUEST_FLAGS;
-	if (has_vhe() || has_hvhe())
-		vcpu->arch.hcr_el2 |= HCR_E2H;
-	if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN)) {
-		/* route synchronous external abort exceptions to EL2 */
-		vcpu->arch.hcr_el2 |= HCR_TEA;
-		/* trap error record accesses */
-		vcpu->arch.hcr_el2 |= HCR_TERR;
-	}
-
-	if (cpus_have_final_cap(ARM64_HAS_STAGE2_FWB)) {
-		vcpu->arch.hcr_el2 |= HCR_FWB;
-	} else {
-		/*
-		 * For non-FWB CPUs, we trap VM ops (HCR_EL2.TVM) until M+C
-		 * get set in SCTLR_EL1 such that we can detect when the guest
-		 * MMU gets turned on and do the necessary cache maintenance
-		 * then.
-		 */
-		vcpu->arch.hcr_el2 |= HCR_TVM;
-	}
-
-	if (cpus_have_final_cap(ARM64_HAS_EVT) &&
-	    !cpus_have_final_cap(ARM64_MISMATCHED_CACHE_TYPE))
-		vcpu->arch.hcr_el2 |= HCR_TID4;
-	else
-		vcpu->arch.hcr_el2 |= HCR_TID2;
-
-	if (vcpu_el1_is_32bit(vcpu))
-		vcpu->arch.hcr_el2 &= ~HCR_RW;
-
-	if (kvm_has_mte(vcpu->kvm))
-		vcpu->arch.hcr_el2 |= HCR_ATA;
-}
-
 static inline unsigned long *vcpu_hcr(struct kvm_vcpu *vcpu)
 {
 	return (unsigned long *)&vcpu->arch.hcr_el2;
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 9e8a496fb284..696acba883c1 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -1115,7 +1115,7 @@ int __init populate_nv_trap_config(void);
 bool lock_all_vcpus(struct kvm *kvm);
 void unlock_all_vcpus(struct kvm *kvm);
 
-void kvm_init_sysreg(struct kvm_vcpu *);
+void kvm_setup_traps(struct kvm_vcpu *);
 
 /* MMIO helpers */
 void kvm_mmio_write_buf(void *buf, unsigned int len, unsigned long data);
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index c4a0a35e02c7..d6c27d8a8f2f 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -683,7 +683,7 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
 	 * This needs to happen after NV has imposed its own restrictions on
 	 * the feature set
 	 */
-	kvm_init_sysreg(vcpu);
+	kvm_setup_traps(vcpu);
 
 	ret = kvm_timer_enable(vcpu);
 	if (ret)
@@ -1438,7 +1438,6 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,
 			icache_inval_all_pou();
 	}
 
-	vcpu_reset_hcr(vcpu);
 	vcpu->arch.cptr_el2 = kvm_get_reset_cptr_el2(vcpu);
 
 	/*
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 131f5b0ca2b9..ac366d0b614a 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -4020,11 +4020,43 @@ int kvm_vm_ioctl_get_reg_writable_masks(struct kvm *kvm, struct reg_mask_range *
 	return 0;
 }
 
-void kvm_init_sysreg(struct kvm_vcpu *vcpu)
+static void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
 {
 	struct kvm *kvm = vcpu->kvm;
 
-	mutex_lock(&kvm->arch.config_lock);
+	vcpu->arch.hcr_el2 = HCR_GUEST_FLAGS;
+	if (has_vhe() || has_hvhe())
+		vcpu->arch.hcr_el2 |= HCR_E2H;
+	if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN)) {
+		/* route synchronous external abort exceptions to EL2 */
+		vcpu->arch.hcr_el2 |= HCR_TEA;
+		/* trap error record accesses */
+		vcpu->arch.hcr_el2 |= HCR_TERR;
+	}
+
+	if (cpus_have_final_cap(ARM64_HAS_STAGE2_FWB)) {
+		vcpu->arch.hcr_el2 |= HCR_FWB;
+	} else {
+		/*
+		 * For non-FWB CPUs, we trap VM ops (HCR_EL2.TVM) until M+C
+		 * get set in SCTLR_EL1 such that we can detect when the guest
+		 * MMU gets turned on and do the necessary cache maintenance
+		 * then.
+		 */
+		vcpu->arch.hcr_el2 |= HCR_TVM;
+	}
+
+	if (cpus_have_final_cap(ARM64_HAS_EVT) &&
+	    !cpus_have_final_cap(ARM64_MISMATCHED_CACHE_TYPE))
+		vcpu->arch.hcr_el2 |= HCR_TID4;
+	else
+		vcpu->arch.hcr_el2 |= HCR_TID2;
+
+	if (vcpu_el1_is_32bit(vcpu))
+		vcpu->arch.hcr_el2 &= ~HCR_RW;
+
+	if (kvm_has_mte(vcpu->kvm))
+		vcpu->arch.hcr_el2 |= HCR_ATA;
 
 	/*
 	 * In the absence of FGT, we cannot independently trap TLBI
@@ -4033,6 +4065,14 @@ void kvm_init_sysreg(struct kvm_vcpu *vcpu)
 	 */
 	if (!kvm_has_feat(kvm, ID_AA64ISAR0_EL1, TLB, OS))
 		vcpu->arch.hcr_el2 |= HCR_TTLBOS;
+}
+
+void kvm_setup_traps(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = vcpu->kvm;
+
+	mutex_lock(&kvm->arch.config_lock);
+	vcpu_reset_hcr(vcpu);
 
 	if (cpus_have_final_cap(ARM64_HAS_HCX)) {
 		vcpu->arch.hcrx_el2 = HCRX_GUEST_FLAGS;
-- 
2.42.0


  parent reply	other threads:[~2024-04-26 10:50 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-26 10:49 [PATCH v2 0/6] KVM: arm64: emulation for CTR_EL0 Sebastian Ott
2024-04-26 10:49 ` [PATCH v2 1/6] KVM: arm64: change return value in arm64_check_features() Sebastian Ott
2024-04-26 10:49 ` Sebastian Ott [this message]
2024-05-01  6:51   ` [PATCH v2 2/6] KVM: arm64: unify trap setup code Oliver Upton
2024-05-03 15:06     ` Sebastian Ott
2024-04-26 10:49 ` [PATCH v2 3/6] KVM: arm64: maintain per VM value for CTR_EL0 Sebastian Ott
2024-04-26 10:49 ` [PATCH v2 4/6] KVM: arm64: add emulation for CTR_EL0 register Sebastian Ott
2024-05-01  8:15   ` Oliver Upton
2024-05-03 15:50     ` Marc Zyngier
2024-05-03 17:27       ` Oliver Upton
2024-05-08 15:17     ` Sebastian Ott
2024-05-08 17:18       ` Oliver Upton
2024-04-26 10:49 ` [PATCH v2 5/6] KVM: arm64: show writable masks for feature registers Sebastian Ott
2024-05-01  7:31   ` Oliver Upton
2024-05-03 11:03     ` Sebastian Ott
2024-04-26 10:49 ` [PATCH v2 6/6] KVM: arm64: rename functions for invariant sys regs Sebastian Ott
2024-05-01  8:17 ` [PATCH v2 0/6] KVM: arm64: emulation for CTR_EL0 Oliver Upton
2024-05-03 11:01   ` Sebastian Ott

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240426104950.7382-3-sebott@redhat.com \
    --to=sebott@redhat.com \
    --cc=catalin.marinas@arm.com \
    --cc=james.morse@arm.com \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=oliver.upton@linux.dev \
    --cc=suzuki.poulose@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox