[PATCH] arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader

[PATCH] arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader

[Johan Hovold]

Enable the multiport USB controller to which the fingerprint reader in
the X13s power button is connected.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 85 +++++++++++++++++++
 1 file changed, 85 insertions(+)


Note that this patch depends on first adding the multiport controller
node to sc8280xp.dtsi:

	https://lore.kernel.org/lkml/20240429162048.2133512-2-quic_kriskura@quicinc.com/

Johan


diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 15ae94c1602d..8cf76682b437 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -414,6 +414,13 @@ vreg_s12b: smps12 {
 			regulator-always-on;
 		};
 
+		vreg_l1b: ldo1 {
+			regulator-name = "vreg_l1b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l3b: ldo3 {
 			regulator-name = "vreg_l3b";
 			regulator-min-microvolt = <1200000>;
@@ -464,6 +471,13 @@ vreg_l1c: ldo1 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l12c: ldo12 {
 			regulator-name = "vreg_l12c";
 			regulator-min-microvolt = <1800000>;
@@ -497,6 +511,13 @@ regulators-2 {
 		vdd-l6-l9-l10-supply = <&vreg_s12b>;
 		vdd-l8-supply = <&vreg_s12b>;
 
+		vreg_l2d: ldo2 {
+			regulator-name = "vreg_l2d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l3d: ldo3 {
 			regulator-name = "vreg_l3d";
 			regulator-min-microvolt = <1200000>;
@@ -525,12 +546,26 @@ vreg_l7d: ldo7 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l8d: ldo8 {
+			regulator-name = "vreg_l8d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l9d: ldo9 {
 			regulator-name = "vreg_l9d";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_l10d: ldo10 {
+			regulator-name = "vreg_l10d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
 	};
 };
 
@@ -1168,6 +1203,56 @@ &usb_1_role_switch {
 	remote-endpoint = <&pmic_glink_con1_hs>;
 };
 
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l1b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy1 {
+	vdda-pll-supply = <&vreg_l8d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy2 {
+	vdda-pll-supply = <&vreg_l10d>;
+	vdda18-supply = <&vreg_l8c>;
+	vdda33-supply = <&vreg_l2d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy3 {
+	vdda-pll-supply = <&vreg_l10d>;
+	vdda18-supply = <&vreg_l8c>;
+	vdda33-supply = <&vreg_l2d>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l1b>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy1 {
+	vdda-phy-supply = <&vreg_l8d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
 &vamacro {
 	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
 	pinctrl-names = "default";
-- 
2.43.2

Re: [PATCH] arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader

[Bjorn Andersson]

On Wed, 01 May 2024 08:56:41 +0200, Johan Hovold wrote:
> Enable the multiport USB controller to which the fingerprint reader in
> the X13s power button is connected.
> 
> 

Applied, thanks!

[1/1] arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader
      commit: eb24bd3c593fad7bd88cb7e7db683014c125e23b

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>