From: Sui Jingfeng <sui.jingfeng@linux.dev>
To: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
Sui Jingfeng <sui.jingfeng@linux.dev>
Subject: [PATCH v5 06/10] drm-bridge: it66121: Use fwnode APIs to acquire device properties
Date: Sat, 4 May 2024 00:41:02 +0800 [thread overview]
Message-ID: <20240503164106.1172650-7-sui.jingfeng@linux.dev> (raw)
In-Reply-To: <20240503164106.1172650-1-sui.jingfeng@linux.dev>
Make this driver less DT-dependent by calling the newly created helpers,
also switch to use fwnode APIs to acquire additional device properties.
A side benifit is that boilerplates get reduced, no functional changes
for DT-based systems.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
---
drivers/gpu/drm/bridge/ite-it66121.c | 57 +++++++++++++++++-----------
1 file changed, 35 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ite-it66121.c b/drivers/gpu/drm/bridge/ite-it66121.c
index 925e42f46cd8..688dc1830654 100644
--- a/drivers/gpu/drm/bridge/ite-it66121.c
+++ b/drivers/gpu/drm/bridge/ite-it66121.c
@@ -15,7 +15,6 @@
#include <linux/bitfield.h>
#include <linux/property.h>
#include <linux/regmap.h>
-#include <linux/of_graph.h>
#include <linux/gpio/consumer.h>
#include <linux/pinctrl/consumer.h>
#include <linux/regulator/consumer.h>
@@ -1480,7 +1479,7 @@ static int it66121_audio_codec_init(struct it66121_ctx *ctx, struct device *dev)
dev_dbg(dev, "%s\n", __func__);
- if (!of_property_read_bool(dev->of_node, "#sound-dai-cells")) {
+ if (!fwnode_property_present(dev_fwnode(dev), "#sound-dai-cells")) {
dev_info(dev, "No \"#sound-dai-cells\", no audio\n");
return 0;
}
@@ -1503,13 +1502,36 @@ static const char * const it66121_supplies[] = {
"vcn33", "vcn18", "vrf12"
};
+static int it66121_read_bus_width(struct fwnode_handle *fwnode, u32 *bus_width)
+{
+ struct fwnode_handle *endpoint;
+ u32 val;
+ int ret;
+
+ endpoint = fwnode_graph_get_endpoint_by_id(fwnode, 0, 0, 0);
+ if (!endpoint)
+ return -EINVAL;
+
+ ret = fwnode_property_read_u32(endpoint, "bus-width", &val);
+ fwnode_handle_put(endpoint);
+ if (ret)
+ return ret;
+
+ if (val != 12 && val != 24)
+ return -EINVAL;
+
+ *bus_width = val;
+
+ return 0;
+}
+
static int it66121_probe(struct i2c_client *client)
{
u32 revision_id, vendor_ids[2] = { 0 }, device_ids[2] = { 0 };
- struct device_node *ep;
int ret;
struct it66121_ctx *ctx;
struct device *dev = &client->dev;
+ struct fwnode_handle *fwnode = dev_fwnode(dev);
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
dev_err(dev, "I2C check functionality failed.\n");
@@ -1520,29 +1542,20 @@ static int it66121_probe(struct i2c_client *client)
if (!ctx)
return -ENOMEM;
- ep = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0);
- if (!ep)
- return -EINVAL;
-
ctx->dev = dev;
ctx->client = client;
ctx->info = i2c_get_match_data(client);
- of_property_read_u32(ep, "bus-width", &ctx->bus_width);
- of_node_put(ep);
-
- if (ctx->bus_width != 12 && ctx->bus_width != 24)
- return -EINVAL;
-
- ep = of_graph_get_remote_node(dev->of_node, 1, -1);
- if (!ep) {
- dev_err(ctx->dev, "The endpoint is unconnected\n");
- return -EINVAL;
- }
+ ret = it66121_read_bus_width(fwnode, &ctx->bus_width);
+ if (ret)
+ return ret;
- ctx->next_bridge = of_drm_find_bridge(ep);
- of_node_put(ep);
- if (!ctx->next_bridge) {
+ ctx->next_bridge = drm_bridge_find_next_bridge_by_fwnode(fwnode, 1);
+ if (IS_ERR(ctx->next_bridge)) {
+ ret = PTR_ERR(ctx->next_bridge);
+ dev_err(dev, "Error in founding the next bridge: %d\n", ret);
+ return ret;
+ } else if (!ctx->next_bridge) {
dev_dbg(ctx->dev, "Next bridge not found, deferring probe\n");
return -EPROBE_DEFER;
}
@@ -1577,8 +1590,8 @@ static int it66121_probe(struct i2c_client *client)
return -ENODEV;
}
+ drm_bridge_set_node(&ctx->bridge, fwnode);
ctx->bridge.funcs = &it66121_bridge_funcs;
- ctx->bridge.of_node = dev->of_node;
ctx->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
ctx->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID;
if (client->irq > 0) {
--
2.34.1
next prev parent reply other threads:[~2024-05-03 16:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-03 16:40 [PATCH v5 00/10] drm/bridge: Allow using fwnode API to get the next bridge Sui Jingfeng
2024-05-03 16:40 ` [PATCH v5 01/10] drm/bridge: Allow using fwnode APIs " Sui Jingfeng
2024-05-03 16:40 ` [PATCH v5 02/10] drm/bridge: Add a helper to setup both the of_node and fwnode of drm bridge Sui Jingfeng
2024-05-03 16:40 ` [PATCH v5 03/10] drm/bridge: simple-bridge: Use fwnode APIs to acquire device properties Sui Jingfeng
2024-05-03 16:41 ` [PATCH v5 04/10] drm/bridge: display-connector: " Sui Jingfeng
2024-05-03 16:41 ` [PATCH v5 05/10] drm/bridge: sii902x: Switch to use " Sui Jingfeng
2024-05-03 16:41 ` Sui Jingfeng [this message]
2024-05-03 16:41 ` [PATCH v5 07/10] drm/bridge: tfp410: Use " Sui Jingfeng
2024-05-03 16:41 ` [PATCH v5 08/10] drm/bridge: sii9234: Use fwnode APIs to abstract DT dependent API away Sui Jingfeng
2024-05-03 16:41 ` [PATCH v5 09/10] drm/bridge: ch7033: Switch to use fwnode based APIs Sui Jingfeng
2024-05-03 16:41 ` [PATCH v5 10/10] drm/bridge: anx7688: Switch to use drm_bridge_set_node() helper Sui Jingfeng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240503164106.1172650-7-sui.jingfeng@linux.dev \
--to=sui.jingfeng@linux.dev \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=linux-kernel@vger.kernel.org \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=rfoss@kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox