[PATCH AUTOSEL 4.19 1/4] ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating

[PATCH AUTOSEL 4.19 1/4] ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating

[Sasha Levin]

From: Derek Fang <derek.fang@realtek.com>

[ Upstream commit 103abab975087e1f01b76fcb54c91dbb65dbc249 ]

The codec leaves tie combo jack's sleeve/ring2 to floating status
default. It would cause electric noise while connecting the active
speaker jack during boot or shutdown.
This patch requests a gpio to control the additional jack circuit
to tie the contacts to the ground or floating.

Signed-off-by: Derek Fang <derek.fang@realtek.com>

Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5645.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index 5f23369d7ccad..fbb3fca59c8cb 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -412,6 +412,7 @@ struct rt5645_priv {
 	struct regmap *regmap;
 	struct i2c_client *i2c;
 	struct gpio_desc *gpiod_hp_det;
+	struct gpio_desc *gpiod_cbj_sleeve;
 	struct snd_soc_jack *hp_jack;
 	struct snd_soc_jack *mic_jack;
 	struct snd_soc_jack *btn_jack;
@@ -3206,6 +3207,9 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse
 		regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2,
 			RT5645_CBJ_MN_JD, 0);
 
+		if (rt5645->gpiod_cbj_sleeve)
+			gpiod_set_value(rt5645->gpiod_cbj_sleeve, 1);
+
 		msleep(600);
 		regmap_read(rt5645->regmap, RT5645_IN1_CTRL3, &val);
 		val &= 0x7;
@@ -3222,6 +3226,8 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse
 			snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
 			snd_soc_dapm_sync(dapm);
 			rt5645->jack_type = SND_JACK_HEADPHONE;
+			if (rt5645->gpiod_cbj_sleeve)
+				gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
 		}
 		if (rt5645->pdata.level_trigger_irq)
 			regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
@@ -3247,6 +3253,9 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse
 		if (rt5645->pdata.level_trigger_irq)
 			regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
 				RT5645_JD_1_1_MASK, RT5645_JD_1_1_INV);
+
+		if (rt5645->gpiod_cbj_sleeve)
+			gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
 	}
 
 	return rt5645->jack_type;
@@ -3892,6 +3901,16 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
 			return ret;
 	}
 
+	rt5645->gpiod_cbj_sleeve = devm_gpiod_get_optional(&i2c->dev, "cbj-sleeve",
+							   GPIOD_OUT_LOW);
+
+	if (IS_ERR(rt5645->gpiod_cbj_sleeve)) {
+		ret = PTR_ERR(rt5645->gpiod_cbj_sleeve);
+		dev_info(&i2c->dev, "failed to initialize gpiod, ret=%d\n", ret);
+		if (ret != -ENOENT)
+			return ret;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(rt5645->supplies); i++)
 		rt5645->supplies[i].supply = rt5645_supply_names[i];
 
@@ -4135,6 +4154,9 @@ static int rt5645_i2c_remove(struct i2c_client *i2c)
 	cancel_delayed_work_sync(&rt5645->jack_detect_work);
 	cancel_delayed_work_sync(&rt5645->rcclock_work);
 
+	if (rt5645->gpiod_cbj_sleeve)
+		gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
+
 	regulator_bulk_disable(ARRAY_SIZE(rt5645->supplies), rt5645->supplies);
 
 	return 0;
@@ -4152,6 +4174,9 @@ static void rt5645_i2c_shutdown(struct i2c_client *i2c)
 		0);
 	msleep(20);
 	regmap_write(rt5645->regmap, RT5645_RESET, 0);
+
+	if (rt5645->gpiod_cbj_sleeve)
+		gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
 }
 
 static struct i2c_driver rt5645_i2c_driver = {
-- 
2.43.0

[PATCH AUTOSEL 4.19 2/4] ASoC: dt-bindings: rt5645: add cbj sleeve gpio property

[Sasha Levin]

From: Derek Fang <derek.fang@realtek.com>

[ Upstream commit 306b38e3fa727d22454a148a364123709e356600 ]

Add an optional gpio property to control external CBJ circuits
to avoid some electric noise caused by sleeve/ring2 contacts floating.

Signed-off-by: Derek Fang <derek.fang@realtek.com>

Link: https://msgid.link/r/20240408091057.14165-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/devicetree/bindings/sound/rt5645.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt
index a03f9a872a716..bfb2217a9a658 100644
--- a/Documentation/devicetree/bindings/sound/rt5645.txt
+++ b/Documentation/devicetree/bindings/sound/rt5645.txt
@@ -16,6 +16,11 @@ Optional properties:
   a GPIO spec for the external headphone detect pin. If jd-mode = 0,
   we will get the JD status by getting the value of hp-detect-gpios.
 
+- cbj-sleeve-gpios:
+  a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
+  contacts to the ground or floating. It could avoid some electric noise from the
+  active speaker jacks.
+
 - realtek,in2-differential
   Boolean. Indicate MIC2 input are differential, rather than single-ended.
 
@@ -64,6 +69,7 @@ codec: rt5650@1a {
 	compatible = "realtek,rt5650";
 	reg = <0x1a>;
 	hp-detect-gpios = <&gpio 19 0>;
+	cbj-sleeve-gpios = <&gpio 20 0>;
 	interrupt-parent = <&gpio>;
 	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 	realtek,dmic-en = "true";
-- 
2.43.0

[PATCH AUTOSEL 4.19 3/4] firewire: nosy: ensure user_length is taken into account when fetching packet contents

[Sasha Levin]

From: Thanassis Avgerinos <thanassis.avgerinos@gmail.com>

[ Upstream commit 38762a0763c10c24a4915feee722d7aa6e73eb98 ]

Ensure that packet_buffer_get respects the user_length provided. If
the length of the head packet exceeds the user_length, packet_buffer_get
will now return 0 to signify to the user that no data were read
and a larger buffer size is required. Helps prevent user space overflows.

Signed-off-by: Thanassis Avgerinos <thanassis.avgerinos@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firewire/nosy.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/firewire/nosy.c b/drivers/firewire/nosy.c
index ac85e03e88e16..f3784c054dd6e 100644
--- a/drivers/firewire/nosy.c
+++ b/drivers/firewire/nosy.c
@@ -161,10 +161,12 @@ packet_buffer_get(struct client *client, char __user *data, size_t user_length)
 	if (atomic_read(&buffer->size) == 0)
 		return -ENODEV;
 
-	/* FIXME: Check length <= user_length. */
+	length = buffer->head->length;
+
+	if (length > user_length)
+		return 0;
 
 	end = buffer->data + buffer->capacity;
-	length = buffer->head->length;
 
 	if (&buffer->head->data[length] < end) {
 		if (copy_to_user(data, buffer->head->data, length))
-- 
2.43.0

[PATCH AUTOSEL 4.19 4/4] ASoC: da7219-aad: fix usage of device_get_named_child_node()

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit e8a6a5ad73acbafd98e8fd3f0cbf6e379771bb76 ]

The documentation for device_get_named_child_node() mentions this
important point:

"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"

Add fwnode_handle_put() to avoid a leaked reference.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153033.38500-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/da7219-aad.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c
index e3515ac8b223f..c7c800f8133b6 100644
--- a/sound/soc/codecs/da7219-aad.c
+++ b/sound/soc/codecs/da7219-aad.c
@@ -634,8 +634,10 @@ static struct da7219_aad_pdata *da7219_aad_fw_to_pdata(struct snd_soc_component
 		return NULL;
 
 	aad_pdata = devm_kzalloc(dev, sizeof(*aad_pdata), GFP_KERNEL);
-	if (!aad_pdata)
+	if (!aad_pdata) {
+		fwnode_handle_put(aad_np);
 		return NULL;
+	}
 
 	aad_pdata->irq = i2c->irq;
 
@@ -710,6 +712,8 @@ static struct da7219_aad_pdata *da7219_aad_fw_to_pdata(struct snd_soc_component
 	else
 		aad_pdata->adc_1bit_rpt = DA7219_AAD_ADC_1BIT_RPT_1;
 
+	fwnode_handle_put(aad_np);
+
 	return aad_pdata;
 }
 
-- 
2.43.0