public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Sui Jingfeng <sui.jingfeng@linux.dev>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>,
	Christian Gmeiner <christian.gmeiner@gmail.com>,
	linux-kernel@vger.kernel.org, etnaviv@lists.freedesktop.org,
	dri-devel@lists.freedesktop.org,
	Sui Jingfeng <sui.jingfeng@linux.dev>
Subject: [etnaviv-next v14 1/8] drm/etnaviv: Add a dedicated helper function to get various clocks
Date: Mon, 20 May 2024 00:53:14 +0800	[thread overview]
Message-ID: <20240519165321.2123356-2-sui.jingfeng@linux.dev> (raw)
In-Reply-To: <20240519165321.2123356-1-sui.jingfeng@linux.dev>

Because the current implementation is DT-based, this only works when the
host platform has the DT support. The problem is that some host platforms
does not provide DT-based clocks drivers, as a result, the driver rage
quit.

PLL hardwares are typically provided by the host platform, which is part
of the entire clock tree. The PLL hardware provide clock pulse to the GPU
core, but it's not belong to the GPU corei itself. PLL registers can be
manipulated directly by the device driver. Hence, it may need dedicated
clock driver.

Add a the etnaviv_gpu_clk_get() function to group similar code blocks,
which make it easier to call this function on the platform where it works.

Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
---
 drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 53 ++++++++++++++++-----------
 1 file changed, 32 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
index d84d73c197fc..e0c36f564fa6 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
@@ -1605,6 +1605,35 @@ static irqreturn_t irq_handler(int irq, void *data)
 	return ret;
 }
 
+static int etnaviv_gpu_clk_get(struct etnaviv_gpu *gpu)
+{
+	struct device *dev = gpu->dev;
+
+	gpu->clk_reg = devm_clk_get_optional(dev, "reg");
+	DBG("clk_reg: %p", gpu->clk_reg);
+	if (IS_ERR(gpu->clk_reg))
+		return PTR_ERR(gpu->clk_reg);
+
+	gpu->clk_bus = devm_clk_get_optional(dev, "bus");
+	DBG("clk_bus: %p", gpu->clk_bus);
+	if (IS_ERR(gpu->clk_bus))
+		return PTR_ERR(gpu->clk_bus);
+
+	gpu->clk_core = devm_clk_get(dev, "core");
+	DBG("clk_core: %p", gpu->clk_core);
+	if (IS_ERR(gpu->clk_core))
+		return PTR_ERR(gpu->clk_core);
+	gpu->base_rate_core = clk_get_rate(gpu->clk_core);
+
+	gpu->clk_shader = devm_clk_get_optional(dev, "shader");
+	DBG("clk_shader: %p", gpu->clk_shader);
+	if (IS_ERR(gpu->clk_shader))
+		return PTR_ERR(gpu->clk_shader);
+	gpu->base_rate_shader = clk_get_rate(gpu->clk_shader);
+
+	return 0;
+}
+
 static int etnaviv_gpu_clk_enable(struct etnaviv_gpu *gpu)
 {
 	int ret;
@@ -1880,27 +1909,9 @@ static int etnaviv_gpu_platform_probe(struct platform_device *pdev)
 	}
 
 	/* Get Clocks: */
-	gpu->clk_reg = devm_clk_get_optional(&pdev->dev, "reg");
-	DBG("clk_reg: %p", gpu->clk_reg);
-	if (IS_ERR(gpu->clk_reg))
-		return PTR_ERR(gpu->clk_reg);
-
-	gpu->clk_bus = devm_clk_get_optional(&pdev->dev, "bus");
-	DBG("clk_bus: %p", gpu->clk_bus);
-	if (IS_ERR(gpu->clk_bus))
-		return PTR_ERR(gpu->clk_bus);
-
-	gpu->clk_core = devm_clk_get(&pdev->dev, "core");
-	DBG("clk_core: %p", gpu->clk_core);
-	if (IS_ERR(gpu->clk_core))
-		return PTR_ERR(gpu->clk_core);
-	gpu->base_rate_core = clk_get_rate(gpu->clk_core);
-
-	gpu->clk_shader = devm_clk_get_optional(&pdev->dev, "shader");
-	DBG("clk_shader: %p", gpu->clk_shader);
-	if (IS_ERR(gpu->clk_shader))
-		return PTR_ERR(gpu->clk_shader);
-	gpu->base_rate_shader = clk_get_rate(gpu->clk_shader);
+	err = etnaviv_gpu_clk_get(gpu);
+	if (err)
+		return err;
 
 	/* TODO: figure out max mapped size */
 	dev_set_drvdata(dev, gpu);
-- 
2.34.1


  reply	other threads:[~2024-05-19 16:54 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-19 16:53 [etnaviv-next v14 0/8] drm/etnaviv: Add driver wrapper for vivante GPUs attached on PCI(e) device Sui Jingfeng
2024-05-19 16:53 ` Sui Jingfeng [this message]
2024-05-19 16:53 ` [etnaviv-next v14 2/8] drm/etnaviv: Add constructor and destructor for the etnaviv_drm_private structure Sui Jingfeng
2024-05-19 16:53 ` [etnaviv-next v14 3/8] drm/etnaviv: Embed struct drm_device into struct etnaviv_drm_private Sui Jingfeng
2024-05-19 16:53 ` [etnaviv-next v14 4/8] drm/etnaviv: Fix wrong cache property being used for vmap() Sui Jingfeng
2024-05-19 16:53 ` [etnaviv-next v14 5/8] drm/etnaviv: Add support for cached coherent caching mode Sui Jingfeng
2024-05-19 16:53 ` [etnaviv-next v14 6/8] drm/etnaviv: Replace the '&pdev->dev' with 'dev' Sui Jingfeng
2024-05-19 16:53 ` [etnaviv-next v14 7/8] drm/etnaviv: Allow creating subdevices and pass platform specific data Sui Jingfeng
2024-05-19 16:53 ` [etnaviv-next v14 8/8] drm/etnaviv: Add support for vivante GPU cores attached via PCIe device Sui Jingfeng
2024-06-24 18:47 ` [etnaviv-next v14 0/8] drm/etnaviv: Add driver wrapper for vivante GPUs attached on PCI(e) device Christian Gmeiner
2024-06-25  3:18 ` Icenowy Zheng
2024-06-25 11:06   ` Sui Jingfeng
2024-06-25 12:01   ` Lucas Stach
2024-06-26  4:05     ` Icenowy Zheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240519165321.2123356-2-sui.jingfeng@linux.dev \
    --to=sui.jingfeng@linux.dev \
    --cc=christian.gmeiner@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=etnaviv@lists.freedesktop.org \
    --cc=l.stach@pengutronix.de \
    --cc=linux+etnaviv@armlinux.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox