[PATCH] tpm_tis_spi: Account for SPI header when allocating TPM SPI xfer buffer

["Matthew R. Ochs" <mochs@nvidia.com>]

The TPM SPI transfer mechanism uses MAX_SPI_FRAMESIZE for computing the
maximum transfer length and the size of the transfer buffer. As such, it
does not account for the 4 bytes of header that prepends the SPI data
frame. This can result in out-of-bounds accesses and was confirmed with
KASAN.

Introduce MAX_SPI_BUFSIZE to account for the header and use to allocate
the transfer buffer.

Fixes: a86a42ac2bd6 ("tpm_tis_spi: Add hardware wait polling")
Signed-off-by: Matthew R. Ochs <mochs@nvidia.com>
Tested-by: Carol Soto <csoto@nvidia.com>
---
 drivers/char/tpm/tpm_tis_spi_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/char/tpm/tpm_tis_spi_main.c b/drivers/char/tpm/tpm_tis_spi_main.c
index 3f9eaf27b41b..ba50eaead9d8 100644
--- a/drivers/char/tpm/tpm_tis_spi_main.c
+++ b/drivers/char/tpm/tpm_tis_spi_main.c
@@ -37,6 +37,8 @@
 #include "tpm_tis_spi.h"
 
 #define MAX_SPI_FRAMESIZE 64
+#define MAX_SPI_HDRSIZE 4
+#define MAX_SPI_BUFSIZE (MAX_SPI_HDRSIZE + MAX_SPI_FRAMESIZE)
 
 /*
  * TCG SPI flow control is documented in section 6.4 of the spec[1]. In short,
@@ -247,7 +249,7 @@ static int tpm_tis_spi_write_bytes(struct tpm_tis_data *data, u32 addr,
 int tpm_tis_spi_init(struct spi_device *spi, struct tpm_tis_spi_phy *phy,
 		     int irq, const struct tpm_tis_phy_ops *phy_ops)
 {
-	phy->iobuf = devm_kmalloc(&spi->dev, MAX_SPI_FRAMESIZE, GFP_KERNEL);
+	phy->iobuf = devm_kmalloc(&spi->dev, MAX_SPI_BUFSIZE, GFP_KERNEL);
 	if (!phy->iobuf)
 		return -ENOMEM;
 
-- 
2.25.1