The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Ravi Bangoria <ravi.bangoria@amd.com>
To: <seanjc@google.com>, <pbonzini@redhat.com>, <nikunj.dadhania@amd.com>
Cc: <ravi.bangoria@amd.com>, <thomas.lendacky@amd.com>,
	<tglx@linutronix.de>, <mingo@redhat.com>, <bp@alien8.de>,
	<dave.hansen@linux.intel.com>, <x86@kernel.org>, <hpa@zytor.com>,
	<michael.roth@amd.com>, <pankaj.gupta@amd.com>,
	<kvm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<santosh.shukla@amd.com>
Subject: [PATCH v4 3/3] KVM: SEV-ES: Fix LBRV code
Date: Fri, 31 May 2024 04:46:44 +0000	[thread overview]
Message-ID: <20240531044644.768-4-ravi.bangoria@amd.com> (raw)
In-Reply-To: <20240531044644.768-1-ravi.bangoria@amd.com>

As documented in APM[1], LBR Virtualization must be enabled for SEV-ES
guests. Although KVM currently enforces LBRV for SEV-ES guests, there
are multiple issues with it:

o MSR_IA32_DEBUGCTLMSR is still intercepted. Since MSR_IA32_DEBUGCTLMSR
  interception is used to dynamically toggle LBRV for performance reasons,
  this can be fatal for SEV-ES guests. For ex SEV-ES guest on Zen3:

  [guest ~]# wrmsr 0x1d9 0x4
  KVM: entry failed, hardware error 0xffffffff
  EAX=00000004 EBX=00000000 ECX=000001d9 EDX=00000000

  Fix this by never intercepting MSR_IA32_DEBUGCTLMSR for SEV-ES guests.
  No additional save/restore logic is required since MSR_IA32_DEBUGCTLMSR
  is of swap type A.

o KVM will disable LBRV if userspace sets MSR_IA32_DEBUGCTLMSR before the
  VMSA is encrypted. Fix this by moving LBRV enablement code post VMSA
  encryption.

[1]: AMD64 Architecture Programmer's Manual Pub. 40332, Rev. 4.07 - June
     2023, Vol 2, 15.35.2 Enabling SEV-ES.
     https://bugzilla.kernel.org/attachment.cgi?id=304653

Fixes: 376c6d285017 ("KVM: SVM: Provide support for SEV-ES vCPU creation/loading")
Co-developed-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
---
 arch/x86/kvm/svm/sev.c | 13 ++++++++-----
 arch/x86/kvm/svm/svm.c |  8 +++++++-
 arch/x86/kvm/svm/svm.h |  3 ++-
 3 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index 8345a5098ab7..7d401f8a3001 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -851,6 +851,14 @@ static int __sev_launch_update_vmsa(struct kvm *kvm, struct kvm_vcpu *vcpu,
 	 */
 	fpstate_set_confidential(&vcpu->arch.guest_fpu);
 	vcpu->arch.guest_state_protected = true;
+
+	/*
+	 * SEV-ES guest mandates LBR Virtualization to be _always_ ON. Enable it
+	 * only after setting guest_state_protected because KVM_SET_MSRS allows
+	 * dynamic toggling of LBRV (for performance reason) on write access to
+	 * MSR_IA32_DEBUGCTLMSR when guest_state_protected is not set.
+	 */
+	svm_enable_lbrv(vcpu);
 	return 0;
 }
 
@@ -4279,7 +4287,6 @@ static void sev_es_init_vmcb(struct vcpu_svm *svm)
 	struct kvm_vcpu *vcpu = &svm->vcpu;
 
 	svm->vmcb->control.nested_ctl |= SVM_NESTED_CTL_SEV_ES_ENABLE;
-	svm->vmcb->control.virt_ext |= LBR_CTL_ENABLE_MASK;
 
 	/*
 	 * An SEV-ES guest requires a VMSA area that is a separate from the
@@ -4331,10 +4338,6 @@ static void sev_es_init_vmcb(struct vcpu_svm *svm)
 	/* Clear intercepts on selected MSRs */
 	set_msr_interception(vcpu, svm->msrpm, MSR_EFER, 1, 1);
 	set_msr_interception(vcpu, svm->msrpm, MSR_IA32_CR_PAT, 1, 1);
-	set_msr_interception(vcpu, svm->msrpm, MSR_IA32_LASTBRANCHFROMIP, 1, 1);
-	set_msr_interception(vcpu, svm->msrpm, MSR_IA32_LASTBRANCHTOIP, 1, 1);
-	set_msr_interception(vcpu, svm->msrpm, MSR_IA32_LASTINTFROMIP, 1, 1);
-	set_msr_interception(vcpu, svm->msrpm, MSR_IA32_LASTINTTOIP, 1, 1);
 }
 
 void sev_init_vmcb(struct vcpu_svm *svm)
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index cadf3085f183..bff08729c0e9 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -99,6 +99,7 @@ static const struct svm_direct_access_msrs {
 	{ .index = MSR_IA32_SPEC_CTRL,			.always = false },
 	{ .index = MSR_IA32_PRED_CMD,			.always = false },
 	{ .index = MSR_IA32_FLUSH_CMD,			.always = false },
+	{ .index = MSR_IA32_DEBUGCTLMSR,		.always = false },
 	{ .index = MSR_IA32_LASTBRANCHFROMIP,		.always = false },
 	{ .index = MSR_IA32_LASTBRANCHTOIP,		.always = false },
 	{ .index = MSR_IA32_LASTINTFROMIP,		.always = false },
@@ -990,7 +991,7 @@ void svm_copy_lbrs(struct vmcb *to_vmcb, struct vmcb *from_vmcb)
 	vmcb_mark_dirty(to_vmcb, VMCB_LBR);
 }
 
-static void svm_enable_lbrv(struct kvm_vcpu *vcpu)
+void svm_enable_lbrv(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
@@ -1000,6 +1001,9 @@ static void svm_enable_lbrv(struct kvm_vcpu *vcpu)
 	set_msr_interception(vcpu, svm->msrpm, MSR_IA32_LASTINTFROMIP, 1, 1);
 	set_msr_interception(vcpu, svm->msrpm, MSR_IA32_LASTINTTOIP, 1, 1);
 
+	if (sev_es_guest(vcpu->kvm))
+		set_msr_interception(vcpu, svm->msrpm, MSR_IA32_DEBUGCTLMSR, 1, 1);
+
 	/* Move the LBR msrs to the vmcb02 so that the guest can see them. */
 	if (is_guest_mode(vcpu))
 		svm_copy_lbrs(svm->vmcb, svm->vmcb01.ptr);
@@ -1009,6 +1013,8 @@ static void svm_disable_lbrv(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
+	KVM_BUG_ON(sev_es_guest(vcpu->kvm), vcpu->kvm);
+
 	svm->vmcb->control.virt_ext &= ~LBR_CTL_ENABLE_MASK;
 	set_msr_interception(vcpu, svm->msrpm, MSR_IA32_LASTBRANCHFROMIP, 0, 0);
 	set_msr_interception(vcpu, svm->msrpm, MSR_IA32_LASTBRANCHTOIP, 0, 0);
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index 2d6c19c55b1a..3424a9577872 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -30,7 +30,7 @@
 #define	IOPM_SIZE PAGE_SIZE * 3
 #define	MSRPM_SIZE PAGE_SIZE * 2
 
-#define MAX_DIRECT_ACCESS_MSRS	47
+#define MAX_DIRECT_ACCESS_MSRS	48
 #define MSRPM_OFFSETS	32
 extern u32 msrpm_offsets[MSRPM_OFFSETS] __read_mostly;
 extern bool npt_enabled;
@@ -583,6 +583,7 @@ u32 *svm_vcpu_alloc_msrpm(void);
 void svm_vcpu_init_msrpm(struct kvm_vcpu *vcpu, u32 *msrpm);
 void svm_vcpu_free_msrpm(u32 *msrpm);
 void svm_copy_lbrs(struct vmcb *to_vmcb, struct vmcb *from_vmcb);
+void svm_enable_lbrv(struct kvm_vcpu *vcpu);
 void svm_update_lbrv(struct kvm_vcpu *vcpu);
 
 int svm_set_efer(struct kvm_vcpu *vcpu, u64 efer);
-- 
2.45.1


  parent reply	other threads:[~2024-05-31  4:47 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-31  4:46 [PATCH v4 0/3] KVM: SEV-ES: Fix KVM_{GET|SET}_MSRS and LBRV handling Ravi Bangoria
2024-05-31  4:46 ` [PATCH v4 1/3] KVM: SEV-ES: Prevent MSR access post VMSA encryption Ravi Bangoria
2024-05-31  4:46 ` [PATCH v4 2/3] KVM: SEV-ES: Disallow SEV-ES guests when X86_FEATURE_LBRV is absent Ravi Bangoria
2024-05-31  4:46 ` Ravi Bangoria [this message]
2024-06-05 11:48   ` [PATCH] KVM: SNP: Fix LBR Virtualization for SNP guest Ravi Bangoria
2024-06-05 11:50     ` Paolo Bonzini
2024-06-05 11:52     ` Aithal, Srikanth
2024-06-03 17:05 ` [PATCH v4 0/3] KVM: SEV-ES: Fix KVM_{GET|SET}_MSRS and LBRV handling Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240531044644.768-4-ravi.bangoria@amd.com \
    --to=ravi.bangoria@amd.com \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.roth@amd.com \
    --cc=mingo@redhat.com \
    --cc=nikunj.dadhania@amd.com \
    --cc=pankaj.gupta@amd.com \
    --cc=pbonzini@redhat.com \
    --cc=santosh.shukla@amd.com \
    --cc=seanjc@google.com \
    --cc=tglx@linutronix.de \
    --cc=thomas.lendacky@amd.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox