From: Devarsh Thakkar <devarsht@ti.com>
To: <mchehab@kernel.org>, <robh@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
<hverkuil-cisco@xs4all.nl>, <linux-media@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<benjamin.gaignard@collabora.com>,
<sebastian.fricke@collabora.com>
Cc: <laurent.pinchart@ideasonboard.com>, <praneeth@ti.com>,
<nm@ti.com>, <vigneshr@ti.com>, <a-bhatia1@ti.com>,
<j-luthra@ti.com>, <b-brnich@ti.com>, <detheridge@ti.com>,
<p-mantena@ti.com>, <vijayp@ti.com>, <andrzej.p@collabora.com>,
<nicolas@ndufresne.ca>
Subject: [PATCH v11 01/11] media: dt-bindings: Add Imagination E5010 JPEG Encoder
Date: Fri, 31 May 2024 22:36:29 +0530 [thread overview]
Message-ID: <20240531170629.1280810-1-devarsht@ti.com> (raw)
In-Reply-To: <20240531170229.1270828-1-devarsht@ti.com>
Add dt-bindings for Imagination E5010 JPEG Encoder [1] which is implemented
as stateful V4L2 M2M driver.
The device supports baseline encoding with two different quantization
tables and compression ratio as demanded.
Minimum resolution supported is 64x64 and Maximum resolution supported is
8192x8192.
[1]: AM62A TRM (Section 7.6 is for JPEG Encoder)
Link: https://www.ti.com/lit/pdf/spruj16
Co-developed-by: David Huang <d-huang@ti.com>
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
V11:
- No change
V10:
- No change
V9:
- No change
V8:
- No change
V7:
- No change
V6:
- No change
V5:
- Add Reviewed-By tag
V4:
- Use ti-specific compatible ti,am62a-jpeg-enc as secondary one
- Update commit message and title
- Remove clock-names as only single clock
V3:
- Add vendor specific compatible
- Update reg names
- Update clocks to 1
- Fix dts example with proper naming
V2: No change
---
.../bindings/media/img,e5010-jpeg-enc.yaml | 75 +++++++++++++++++++
MAINTAINERS | 5 ++
2 files changed, 80 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
diff --git a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
new file mode 100644
index 000000000000..085020cb9e61
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/img,e5010-jpeg-enc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination E5010 JPEG Encoder
+
+maintainers:
+ - Devarsh Thakkar <devarsht@ti.com>
+
+description: |
+ The E5010 is a JPEG encoder from Imagination Technologies implemented on
+ TI's AM62A SoC. It is capable of real time encoding of YUV420 and YUV422
+ inputs to JPEG and M-JPEG. It supports baseline JPEG Encoding up to
+ 8Kx8K resolution.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: ti,am62a-jpeg-enc
+ - const: img,e5010-jpeg-enc
+ - const: img,e5010-jpeg-enc
+
+ reg:
+ items:
+ - description: The E5010 core register region
+ - description: The E5010 mmu register region
+
+ reg-names:
+ items:
+ - const: core
+ - const: mmu
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ jpeg-encoder@fd20000 {
+ compatible = "img,e5010-jpeg-enc";
+ reg = <0x00 0xfd20000 0x00 0x100>,
+ <0x00 0xfd20200 0x00 0x200>;
+ reg-names = "core", "mmu";
+ clocks = <&k3_clks 201 0>;
+ power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index dbc5d9ec3d20..f68e1a5757b5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10767,6 +10767,11 @@ S: Maintained
F: Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
F: drivers/auxdisplay/img-ascii-lcd.c
+IMGTEC JPEG ENCODER DRIVER
+M: Devarsh Thakkar <devarsht@ti.com>
+S: Supported
+F: Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
+
IMGTEC IR DECODER DRIVER
S: Orphan
F: drivers/media/rc/img-ir/
--
2.39.1
next prev parent reply other threads:[~2024-05-31 17:06 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-31 17:02 [PATCH v11 00/11] Add V4L2 M2M Driver for E5010 JPEG Encoder Devarsh Thakkar
2024-05-31 17:06 ` Devarsh Thakkar [this message]
2024-05-31 17:08 ` [PATCH v11 02/11] media: imagination: Add E5010 JPEG Encoder driver Devarsh Thakkar
2024-05-31 17:09 ` [PATCH v11 03/11] media: v4l2-jpeg: Export reference quantization and huffman tables Devarsh Thakkar
2024-05-31 17:09 ` [PATCH v11 04/11] media: imagination: Use exported tables from v4l2-jpeg core Devarsh Thakkar
2024-05-31 17:11 ` [PATCH v11 05/11] media: verisilicon : Use exported tables from v4l2-jpeg for hantro codec Devarsh Thakkar
2024-05-31 17:11 ` [PATCH v11 06/11] math.h: Add macros for rounding to closest value Devarsh Thakkar
2024-05-31 17:42 ` Andy Shevchenko
2024-05-31 17:12 ` [PATCH v11 07/11] Documentation: core-api: Add math.h macros and functions Devarsh Thakkar
2024-05-31 17:41 ` Andy Shevchenko
2024-05-31 18:31 ` Randy Dunlap
2024-06-01 16:41 ` Devarsh Thakkar
2024-05-31 17:13 ` [PATCH v11 08/11] lib: add basic KUnit test for lib/math Devarsh Thakkar
2024-05-31 17:39 ` Andy Shevchenko
2024-05-31 17:16 ` [PATCH v11 09/11] lib: math_kunit: Add tests for new macros related to rounding to nearest value Devarsh Thakkar
2024-05-31 17:43 ` Andy Shevchenko
2024-05-31 17:18 ` [PATCH v11 10/11] media: imagination: Round to closest multiple for cropping region Devarsh Thakkar
2024-05-31 17:20 ` [PATCH v11 11/11] gpu: ipu-v3: Use generic macro for rounding closest to specified value Devarsh Thakkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240531170629.1280810-1-devarsht@ti.com \
--to=devarsht@ti.com \
--cc=a-bhatia1@ti.com \
--cc=andrzej.p@collabora.com \
--cc=b-brnich@ti.com \
--cc=benjamin.gaignard@collabora.com \
--cc=conor+dt@kernel.org \
--cc=detheridge@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=j-luthra@ti.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nicolas@ndufresne.ca \
--cc=nm@ti.com \
--cc=p-mantena@ti.com \
--cc=praneeth@ti.com \
--cc=robh@kernel.org \
--cc=sebastian.fricke@collabora.com \
--cc=vigneshr@ti.com \
--cc=vijayp@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox