From: Ard Biesheuvel <ardb+git@google.com>
To: linux-kernel@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>,
Tom Lendacky <thomas.lendacky@amd.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
Dave Hansen <dave.hansen@linux.intel.com>,
Andy Lutomirski <luto@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Kees Cook <keescook@chromium.org>,
Brian Gerst <brgerst@gmail.com>
Subject: [PATCH v3 3/4] x86/boot/64: Determine VA/PA offset before entering C code
Date: Wed, 5 Jun 2024 12:16:14 +0200 [thread overview]
Message-ID: <20240605101610.2824747-9-ardb+git@google.com> (raw)
In-Reply-To: <20240605101610.2824747-6-ardb+git@google.com>
From: Ard Biesheuvel <ardb@kernel.org>
Implicit absolute symbol references (e.g., taking the address of a
global variable) must be avoided in the C code that runs from the early
1:1 mapping of the kernel, given that this is a practice that violates
assumptions on the part of the toolchain. I.e., RIP-relative and
absolute references are expected to produce the same values, and so the
compiler is free to choose either. However, the code currently assumes
that RIP-relative references are never emitted here.
So an explicit virtual-to-physical offset needs to be used instead to
derive the kernel virtual addresses of _text and _end, instead of simply
taking the addresses and assuming that the compiler will not choose to
use a RIP-relative references in this particular case.
Currently, phys_base is already used to perform such calculations, but
it is derived from the kernel virtual address of _text, which is taken
using an implicit absolute symbol reference. So instead, derive this
VA-to-PA offset in asm code, using the kernel VA of common_startup_64
(which we already keep in a global variable for other reasons), and pass
it to the C startup code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
arch/x86/include/asm/setup.h | 2 +-
arch/x86/kernel/head64.c | 8 +++++---
arch/x86/kernel/head_64.S | 9 ++++++++-
3 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index e61e68d71cba..aca18be5a228 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -47,7 +47,7 @@ extern unsigned long saved_video_mode;
extern void reserve_standard_io_resources(void);
extern void i386_reserve_resources(void);
-extern unsigned long __startup_64(unsigned long physaddr, struct boot_params *bp);
+extern unsigned long __startup_64(unsigned long p2v_offset, struct boot_params *bp);
extern void startup_64_setup_gdt_idt(void);
extern void early_setup_idt(void);
extern void __init do_early_exception(struct pt_regs *regs, int trapnr);
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index a817ed0724d1..81696a4967e6 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -138,12 +138,14 @@ static unsigned long __head sme_postprocess_startup(struct boot_params *bp, pmdv
* doesn't have to generate PC-relative relocations when accessing globals from
* that function. Clang actually does not generate them, which leads to
* boot-time crashes. To work around this problem, every global pointer must
- * be accessed using RIP_REL_REF().
+ * be accessed using RIP_REL_REF(). Kernel virtual addresses can be determined
+ * by subtracting p2v_offset from the RIP-relative address.
*/
-unsigned long __head __startup_64(unsigned long physaddr,
+unsigned long __head __startup_64(unsigned long p2v_offset,
struct boot_params *bp)
{
pmd_t (*early_pgts)[PTRS_PER_PMD] = RIP_REL_REF(early_dynamic_pgts);
+ unsigned long physaddr = (unsigned long)&RIP_REL_REF(_text);
unsigned long pgtable_flags;
unsigned long load_delta;
pgdval_t *pgd;
@@ -163,7 +165,7 @@ unsigned long __head __startup_64(unsigned long physaddr,
* Compute the delta between the address I am compiled to run at
* and the address I am actually running at.
*/
- load_delta = physaddr - (unsigned long)(_text - __START_KERNEL_map);
+ load_delta = __START_KERNEL_map + p2v_offset;
RIP_REL_REF(phys_base) = load_delta;
/* Is the address not 2M aligned? */
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 330922b328bf..d0e494607acc 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -100,13 +100,20 @@ SYM_CODE_START_NOALIGN(startup_64)
/* Sanitize CPU configuration */
call verify_cpu
+ /*
+ * Use the 1:1 physical and kernel virtual addresses of
+ * common_startup_64 to determine the physical-to-virtual offset, and
+ * pass it as the first argument to __startup_64().
+ */
+ leaq common_startup_64(%rip), %rdi
+ subq 0f(%rip), %rdi
+
/*
* Perform pagetable fixups. Additionally, if SME is active, encrypt
* the kernel and retrieve the modifier (SME encryption mask if SME
* is active) to be added to the initial pgdir entry that will be
* programmed into CR3.
*/
- leaq _text(%rip), %rdi
movq %r15, %rsi
call __startup_64
--
2.45.1.288.g0e0cd299f1-goog
next prev parent reply other threads:[~2024-06-05 10:36 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-05 10:16 [PATCH v3 0/4] x86: Rid .head.text of all abs references Ard Biesheuvel
2024-06-05 10:16 ` [PATCH v3 1/4] x86/sev: Avoid WARN()s in early boot code Ard Biesheuvel
2024-06-05 10:16 ` [PATCH v3 2/4] x86/xen/pvh: Move startup code into .ref.text Ard Biesheuvel
2024-06-05 10:16 ` Ard Biesheuvel [this message]
2024-06-05 10:16 ` [PATCH v3 4/4] x86/boot/64: Avoid intentional absolute symbol references in .head.text Ard Biesheuvel
2024-11-07 15:59 ` [PATCH v3 0/4] x86: Rid .head.text of all abs references Borislav Petkov
2024-11-07 16:12 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240605101610.2824747-9-ardb+git@google.com \
--to=ardb+git@google.com \
--cc=ardb@kernel.org \
--cc=arnd@arndb.de \
--cc=bp@alien8.de \
--cc=brgerst@gmail.com \
--cc=dave.hansen@linux.intel.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=thomas.lendacky@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox