public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>,
	Niklas Neronin <niklas.neronin@linux.intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Sasha Levin <sashal@kernel.org>,
	mathias.nyman@intel.com, linux-usb@vger.kernel.org
Subject: [PATCH AUTOSEL 6.9 18/28] xhci: remove XHCI_TRUST_TX_LENGTH quirk
Date: Wed,  5 Jun 2024 07:48:47 -0400	[thread overview]
Message-ID: <20240605114927.2961639-18-sashal@kernel.org> (raw)
In-Reply-To: <20240605114927.2961639-1-sashal@kernel.org>

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit 34b67198244f2d7d8409fa4eb76204c409c0c97e ]

If this quirk was set then driver would treat transfer events with
'Success' completion code as 'Short packet' if there were untransferred
bytes left.

This is so common that turn it into default behavior.

xhci_warn_ratelimited() is no longer used after this, so remove it.

A success event with untransferred bytes left doesn't always mean a
misbehaving controller. If there was an error mid a multi-TRB TD it's
allowed to issue a success event for the last TRB in that TD.

See xhci 1.2 spec 4.9.1 Transfer Descriptors

"Note: If an error is detected while processing a multi-TRB TD, the xHC
 shall generate a Transfer Event for the TRB that the error was detected
 on with the appropriate error Condition Code, then may advance to the
 next TD. If in the process of advancing to the next TD, a Transfer TRB
 is encountered with its IOC flag set, then the Condition Code of the
 Transfer Event generated for that Transfer TRB should be Success,
 because there was no error actually associated with the TRB that
 generated the Event. However, an xHC implementation may redundantly
 assert the original error Condition Code."

Co-developed-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240429140245.3955523-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-pci.c  | 15 ++-------------
 drivers/usb/host/xhci-rcar.c |  6 ++----
 drivers/usb/host/xhci-ring.c | 15 +++++----------
 drivers/usb/host/xhci.h      |  4 +---
 4 files changed, 10 insertions(+), 30 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 93b6976480188..653b47c45591d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -270,17 +270,12 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 				"QUIRK: Fresco Logic revision %u "
 				"has broken MSI implementation",
 				pdev->revision);
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
 			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009)
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 
-	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
-			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100)
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
-
 	if (pdev->vendor == PCI_VENDOR_ID_NEC)
 		xhci->quirks |= XHCI_NEC_HOST;
 
@@ -307,11 +302,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 	}
 
-	if (pdev->vendor == PCI_VENDOR_ID_AMD) {
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
-		if (pdev->device == 0x43f7)
-			xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
-	}
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x43f7)
+		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
 		((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
@@ -399,12 +391,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_EJ168) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
 	    pdev->device == 0x0014) {
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 		xhci->quirks |= XHCI_ZERO_64B_REGS;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
@@ -434,7 +424,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
-		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 		xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index ab9c5969e4624..8b357647728c2 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -214,8 +214,7 @@ static int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
  */
 #define SET_XHCI_PLAT_PRIV_FOR_RCAR(firmware)				\
 	.firmware_name = firmware,					\
-	.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH |	\
-		  XHCI_SLOW_SUSPEND,					\
+	.quirks = XHCI_NO_64BIT_SUPPORT |  XHCI_SLOW_SUSPEND,		\
 	.init_quirk = xhci_rcar_init_quirk,				\
 	.plat_start = xhci_rcar_start,					\
 	.resume_quirk = xhci_rcar_resume_quirk,
@@ -229,8 +228,7 @@ static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
 };
 
 static const struct xhci_plat_priv xhci_plat_renesas_rzv2m = {
-	.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH |
-		  XHCI_SLOW_SUSPEND,
+	.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_SLOW_SUSPEND,
 	.init_quirk = xhci_rzv2m_init_quirk,
 	.plat_start = xhci_rzv2m_start,
 };
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 575f0fd9c9f11..e9ba5bc321bd1 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2399,8 +2399,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
 			break;
 		if (remaining) {
 			frame->status = short_framestatus;
-			if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
-				sum_trbs_for_length = true;
+			sum_trbs_for_length = true;
 			break;
 		}
 		frame->status = 0;
@@ -2650,15 +2649,11 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	 * transfer type
 	 */
 	case COMP_SUCCESS:
-		if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
-			break;
-		if (xhci->quirks & XHCI_TRUST_TX_LENGTH ||
-		    ep_ring->last_td_was_short)
+		if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
 			trb_comp_code = COMP_SHORT_PACKET;
-		else
-			xhci_warn_ratelimited(xhci,
-					      "WARN Successful completion on short TX for slot %u ep %u: needs XHCI_TRUST_TX_LENGTH quirk?\n",
-					      slot_id, ep_index);
+			xhci_dbg(xhci, "Successful completion on short TX for slot %u ep %u with last td short %d\n",
+				 slot_id, ep_index, ep_ring->last_td_was_short);
+		}
 		break;
 	case COMP_SHORT_PACKET:
 		break;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 6f4bf98a62824..cdca3126b302b 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1589,7 +1589,7 @@ struct xhci_hcd {
 #define XHCI_RESET_ON_RESUME	BIT_ULL(7)
 #define	XHCI_SW_BW_CHECKING	BIT_ULL(8)
 #define XHCI_AMD_0x96_HOST	BIT_ULL(9)
-#define XHCI_TRUST_TX_LENGTH	BIT_ULL(10)
+#define XHCI_TRUST_TX_LENGTH	BIT_ULL(10) /* Deprecated */
 #define XHCI_LPM_SUPPORT	BIT_ULL(11)
 #define XHCI_INTEL_HOST		BIT_ULL(12)
 #define XHCI_SPURIOUS_REBOOT	BIT_ULL(13)
@@ -1729,8 +1729,6 @@ static inline bool xhci_has_one_roothub(struct xhci_hcd *xhci)
 	dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
 #define xhci_warn(xhci, fmt, args...) \
 	dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
-#define xhci_warn_ratelimited(xhci, fmt, args...) \
-	dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
 #define xhci_info(xhci, fmt, args...) \
 	dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
 
-- 
2.43.0


  parent reply	other threads:[~2024-06-05 11:50 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-05 11:48 [PATCH AUTOSEL 6.9 01/28] usb: gadget: uvc: configfs: ensure guid to be valid before set Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 02/28] f2fs: fix to detect inconsistent nat entry during truncation Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 03/28] f2fs: remove clear SB_INLINECRYPT flag in default_options Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 04/28] usb: typec: ucsi_glink: rework quirks implementation Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 05/28] usb: misc: uss720: check for incompatible versions of the Belkin F5U002 Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 06/28] Avoid hw_desc array overrun in dw-axi-dmac Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 07/28] usb: dwc3: pci: Don't set "linux,phy_charger_detect" property on Lenovo Yoga Tab2 1380 Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 08/28] usb: typec: ucsi_glink: drop special handling for CCI_BUSY Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 09/28] udf: udftime: prevent overflow in udf_disk_stamp_to_time() Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 10/28] PCI/PM: Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 11/28] f2fs: don't set RO when shutting down f2fs Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 12/28] MIPS: Octeon: Add PCIe link status check Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 13/28] serial: imx: Introduce timeout when waiting on transmitter empty Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 14/28] serial: exar: adding missing CTI and Exar PCI ids Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 15/28] usb: gadget: function: Remove usage of the deprecated ida_simple_xx() API Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 16/28] usb: dwc3: core: Access XHCI address space temporarily to read port info Sasha Levin
2024-06-05 11:53   ` Johan Hovold
2024-06-19 14:33     ` Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 17/28] f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode() Sasha Levin
2024-06-05 11:48 ` Sasha Levin [this message]
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 19/28] tty: add the option to have a tty reject a new ldisc Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 20/28] greybus: Fix use-after-free bug in gb_interface_release due to race condition Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 21/28] i2c: lpi2c: Avoid calling clk_get_rate during transfer Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 22/28] cxl: Add post-reset warning if reset results in loss of previously committed HDM decoders Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 23/28] vfio/pci: Collect hot-reset devices to local buffer Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 24/28] usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 25/28] cpufreq: amd-pstate: fix memory leak on CPU EPP exit Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 26/28] ACPI: EC: Install address space handler at the namespace root Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 27/28] PCI: Do not wait for disconnected devices when resuming Sasha Levin
2024-06-05 11:48 ` [PATCH AUTOSEL 6.9 28/28] OPP: Fix required_opp_tables for multiple genpds using same table Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240605114927.2961639-18-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=mathias.nyman@linux.intel.com \
    --cc=niklas.neronin@linux.intel.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox