From: Philipp Stanner <pstanner@redhat.com>
To: Hans de Goede <hdegoede@redhat.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
Bjorn Helgaas <bhelgaas@google.com>,
Sam Ravnborg <sam@ravnborg.org>,
dakr@redhat.com
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, Philipp Stanner <pstanner@redhat.com>
Subject: [PATCH v8 08/13] PCI: Move pinned status bit to struct pci_dev
Date: Mon, 10 Jun 2024 11:31:30 +0200 [thread overview]
Message-ID: <20240610093149.20640-9-pstanner@redhat.com> (raw)
In-Reply-To: <20240610093149.20640-1-pstanner@redhat.com>
The bit describing whether the PCI device is currently pinned is stored
in struct pci_devres. To clean up and simplify the PCI devres API, it's
better if this information is stored in struct pci_dev.
This will later permit simplifying pcim_enable_device().
Move the 'pinned' boolean bit to struct pci_dev.
Restructure bits in struct pci_dev so the pm / pme fields are next to
each other.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
---
drivers/pci/devres.c | 14 ++++----------
drivers/pci/pci.h | 1 -
include/linux/pci.h | 4 +++-
3 files changed, 7 insertions(+), 12 deletions(-)
diff --git a/drivers/pci/devres.c b/drivers/pci/devres.c
index 9d25940ce260..2696baef5c2c 100644
--- a/drivers/pci/devres.c
+++ b/drivers/pci/devres.c
@@ -403,7 +403,7 @@ static void pcim_release(struct device *gendev, void *res)
if (this->restore_intx)
pci_intx(dev, this->orig_intx);
- if (pci_is_enabled(dev) && !this->pinned)
+ if (pci_is_enabled(dev) && !dev->pinned)
pci_disable_device(dev);
}
@@ -459,18 +459,12 @@ EXPORT_SYMBOL(pcim_enable_device);
* pcim_pin_device - Pin managed PCI device
* @pdev: PCI device to pin
*
- * Pin managed PCI device @pdev. Pinned device won't be disabled on
- * driver detach. @pdev must have been enabled with
- * pcim_enable_device().
+ * Pin managed PCI device @pdev. Pinned device won't be disabled on driver
+ * detach. @pdev must have been enabled with pcim_enable_device().
*/
void pcim_pin_device(struct pci_dev *pdev)
{
- struct pci_devres *dr;
-
- dr = find_pci_dr(pdev);
- WARN_ON(!dr || !pci_is_enabled(pdev));
- if (dr)
- dr->pinned = 1;
+ pdev->pinned = true;
}
EXPORT_SYMBOL(pcim_pin_device);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index d7f00b43b098..6e02ba1b5947 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -821,7 +821,6 @@ static inline pci_power_t mid_pci_get_power_state(struct pci_dev *pdev)
* then remove them from here.
*/
struct pci_devres {
- unsigned int pinned:1;
unsigned int orig_intx:1;
unsigned int restore_intx:1;
unsigned int mwi:1;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index fb004fd4e889..cc9247f78158 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -367,10 +367,12 @@ struct pci_dev {
this is D0-D3, D0 being fully
functional, and D3 being off. */
u8 pm_cap; /* PM capability offset */
- unsigned int imm_ready:1; /* Supports Immediate Readiness */
unsigned int pme_support:5; /* Bitmask of states from which PME#
can be generated */
unsigned int pme_poll:1; /* Poll device's PME status bit */
+ unsigned int enabled:1; /* Whether this dev is enabled */
+ unsigned int pinned:1; /* Whether this dev is pinned */
+ unsigned int imm_ready:1; /* Supports Immediate Readiness */
unsigned int d1_support:1; /* Low power state D1 is supported */
unsigned int d2_support:1; /* Low power state D2 is supported */
unsigned int no_d1d2:1; /* D1 and D2 are forbidden */
--
2.45.0
next prev parent reply other threads:[~2024-06-10 9:32 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-10 9:31 [PATCH v8 00/13] Make PCI's devres API more consistent Philipp Stanner
2024-06-10 9:31 ` [PATCH v8 01/13] PCI: Add and use devres helper for bit masks Philipp Stanner
2024-06-10 9:31 ` [PATCH v8 02/13] PCI: Add devres helpers for iomap table Philipp Stanner
2024-06-10 9:31 ` [PATCH v8 03/13] PCI: Reimplement plural devres functions Philipp Stanner
2024-06-11 21:44 ` Bjorn Helgaas
2024-06-12 8:51 ` Philipp Stanner
2024-06-12 20:42 ` Bjorn Helgaas
2024-06-13 6:51 ` Philipp Stanner
2024-06-10 9:31 ` [PATCH v8 04/13] PCI: Deprecate two surplus " Philipp Stanner
2024-06-10 9:31 ` [PATCH v8 05/13] PCI: Make devres region requests consistent Philipp Stanner
2024-06-10 9:31 ` [PATCH v8 06/13] PCI: Warn users about complicated devres nature Philipp Stanner
2024-06-10 9:31 ` [PATCH v8 07/13] PCI: Remove enabled status bit from pci_devres Philipp Stanner
2024-06-10 9:31 ` Philipp Stanner [this message]
2024-06-10 10:19 ` [PATCH v8 08/13] PCI: Move pinned status bit to struct pci_dev Philipp Stanner
2024-06-10 9:31 ` [PATCH v8 09/13] PCI: Give pcim_set_mwi() its own devres callback Philipp Stanner
2024-06-10 9:31 ` [PATCH v8 10/13] PCI: Give pci_intx() " Philipp Stanner
2024-06-10 9:31 ` [PATCH v8 11/13] PCI: Remove legacy pcim_release() Philipp Stanner
2024-06-10 9:31 ` [PATCH v8 12/13] PCI: Add pcim_iomap_range() Philipp Stanner
2024-06-10 9:31 ` [PATCH v8 13/13] drm/vboxvideo: fix mapping leaks Philipp Stanner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240610093149.20640-9-pstanner@redhat.com \
--to=pstanner@redhat.com \
--cc=airlied@gmail.com \
--cc=bhelgaas@google.com \
--cc=dakr@redhat.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=hdegoede@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=sam@ravnborg.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox