From: Nathan Morrisson <nmorrisson@phytec.com>
To: nm@ti.com, vigneshr@ti.com, kristo@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, upstream@lists.phytec.de,
w.egorov@phytec.de
Subject: [PATCH v3 2/4] arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable eth phy
Date: Thu, 13 Jun 2024 16:07:57 -0700 [thread overview]
Message-ID: <20240613230759.1984966-3-nmorrisson@phytec.com> (raw)
In-Reply-To: <20240613230759.1984966-1-nmorrisson@phytec.com>
Add an overlay to disable the eth phy for all am6xx-phycore-som
boards.
The EEPROM on am6xx-phycore-soms contains information about the
configuration of the SOM. The standard configuration of the SOM
has an ethernet phy, but if no ethernet phy is populated, the EEPROM
will indicate that change and we can use this overlay to cleanly
disable the ethernet phy.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
---
v3:
- Explain why we are adding the overlay in the commit message
v2:
- Add build time tests in makefile
arch/arm64/boot/dts/ti/Makefile | 7 +++++++
.../ti/k3-am6xx-phycore-disable-eth-phy.dtso | 19 +++++++++++++++++++
2 files changed, 26 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 2c327cc320cf..320da5ea38e0 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -54,6 +54,9 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
+# Common overlays for the phyCORE-AM6* family of boards
+dtb-$(CONFIG_ARCH_K3) += k3-am6xx-phycore-disable-eth-phy.dtbo
+
# Boards with AM65x SoC
k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb \
k3-am654-base-board-rocktech-rk101-panel.dtbo \
@@ -107,6 +110,8 @@ k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
k3-am625-beagleplay-csi2-ov5640.dtbo
k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \
k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
+k3-am625-phyboard-lyra-disable-eth-phy-dtbs := k3-am625-phyboard-lyra-rdk.dtb \
+ k3-am6xx-phycore-disable-eth-phy.dtbo
k3-am625-phyboard-lyra-gpio-fan-dtbs := k3-am625-phyboard-lyra-rdk.dtb \
k3-am62x-phyboard-lyra-gpio-fan.dtbo
k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \
@@ -132,6 +137,8 @@ k3-am62p5-sk-csi2-tevi-ov5640-dtbs := k3-am62p5-sk.dtb \
k3-am62x-sk-csi2-tevi-ov5640.dtbo
k3-am642-evm-icssg1-dualemac-dtbs := \
k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac.dtbo
+k3-am642-phyboard-electra-disable-eth-phy-dtbs := \
+ k3-am642-phyboard-electra-rdk.dtb k3-am6xx-phycore-disable-eth-phy.dtbo
k3-am642-phyboard-electra-gpio-fan-dtbs := \
k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-gpio-fan.dtbo
k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
diff --git a/arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso b/arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso
new file mode 100644
index 000000000000..356c82bbe143
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023 PHYTEC America, LLC
+ * Author: Garrett Giordano <ggiordano@phytec.com>
+ *
+ * Copyright (C) 2024 PHYTEC America, LLC
+ * Author: Nathan Morrisson <nmorrisson@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&cpsw3g_phy1 {
+ status = "disabled";
+};
+
+&cpsw_port1 {
+ status = "disabled";
+};
--
2.25.1
next prev parent reply other threads:[~2024-06-13 23:09 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-13 23:07 [PATCH v3 0/4] Add overlays to disable optional hardware in k3-am6xx-phycore-som boards Nathan Morrisson
2024-06-13 23:07 ` [PATCH v3 1/4] arm64: dts: ti: k3-am64-phycore-som: Add serial_flash label Nathan Morrisson
2024-06-13 23:07 ` Nathan Morrisson [this message]
2024-06-13 23:07 ` [PATCH v3 3/4] arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable rtc Nathan Morrisson
2024-06-13 23:07 ` [PATCH v3 4/4] arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable spi nor Nathan Morrisson
2024-06-17 14:03 ` [PATCH v3 0/4] Add overlays to disable optional hardware in k3-am6xx-phycore-som boards Wadim Egorov
2024-06-21 15:23 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240613230759.1984966-3-nmorrisson@phytec.com \
--to=nmorrisson@phytec.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=upstream@lists.phytec.de \
--cc=vigneshr@ti.com \
--cc=w.egorov@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox