From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Ricardo Ribalda <ribalda@chromium.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Sergey Senozhatsky <senozhatsky@chromium.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 7/7] media: uvcvideo: Replace get_mapping with filter_mapping
Date: Mon, 17 Jun 2024 01:17:33 +0300 [thread overview]
Message-ID: <20240616221733.GA28126@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20240610-billion-v2-7-38e861475f85@chromium.org>
Hi Ricardo,
Thank you for the patch.
On Mon, Jun 10, 2024 at 11:09:58PM +0000, Ricardo Ribalda wrote:
> If the callback returns a mapping instead of adding it, the codeflow is
> more clean and we do not need a forward declaration of
> __uvc_ctrl_add_mapping_to_list().
>
> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
This should have been squashed in the previous patches as appropriate.
It's hard to review the new version this way.
The diff with v1 looks good, so I don't expect to have further comments.
> ---
> drivers/media/usb/uvc/uvc_ctrl.c | 40 ++++++++++++++++++----------------------
> drivers/media/usb/uvc/uvcvideo.h | 6 +++---
> 2 files changed, 21 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
> index 1c1710e3c486..4a13f2685d9e 100644
> --- a/drivers/media/usb/uvc/uvc_ctrl.c
> +++ b/drivers/media/usb/uvc/uvc_ctrl.c
> @@ -495,11 +495,8 @@ static const struct uvc_control_mapping uvc_ctrl_power_line_mapping_uvc15 = {
> V4L2_CID_POWER_LINE_FREQUENCY_DISABLED),
> };
>
> -static int __uvc_ctrl_add_mapping_to_list(struct uvc_video_chain *chain,
> - struct uvc_control *ctrl, const struct uvc_control_mapping *mapping);
> -
> -static int uvc_ctrl_add_plf_mapping(struct uvc_video_chain *chain,
> - struct uvc_control *ctrl, const struct uvc_control_mapping *mapping)
> +static const struct uvc_control_mapping *uvc_ctrl_filter_plf_mapping
> + (struct uvc_video_chain *chain, struct uvc_control *ctrl)
> {
> const struct uvc_control_mapping *out_mapping =
> &uvc_ctrl_power_line_mapping_uvc11;
> @@ -509,7 +506,7 @@ static int uvc_ctrl_add_plf_mapping(struct uvc_video_chain *chain,
>
> buf = kmalloc(sizeof(*buf), GFP_KERNEL);
> if (!buf)
> - return -ENOMEM;
> + return NULL;
>
> /* Save the default PLF value, so we can restore it. */
> ret = uvc_query_ctrl(chain->dev, UVC_GET_CUR, ctrl->entity->id,
> @@ -517,7 +514,7 @@ static int uvc_ctrl_add_plf_mapping(struct uvc_video_chain *chain,
> buf, sizeof(*buf));
> /* If we cannot read the control skip it. */
> if (ret)
> - return ret;
> + return NULL;
> init_val = *buf;
>
> /* If PLF value cannot be set to off, it is limited. */
> @@ -526,8 +523,7 @@ static int uvc_ctrl_add_plf_mapping(struct uvc_video_chain *chain,
> chain->dev->intfnum, ctrl->info.selector,
> buf, sizeof(*buf));
> if (ret)
> - return __uvc_ctrl_add_mapping_to_list(chain, ctrl,
> - &uvc_ctrl_power_line_mapping_limited);
> + return &uvc_ctrl_power_line_mapping_limited;
>
> /* UVC 1.1 does not define auto, we can exit. */
> if (chain->dev->uvc_version < 0x150)
> @@ -548,7 +544,7 @@ static int uvc_ctrl_add_plf_mapping(struct uvc_video_chain *chain,
> chain->dev->intfnum, ctrl->info.selector,
> buf, sizeof(*buf));
>
> - return __uvc_ctrl_add_mapping_to_list(chain, ctrl, out_mapping);
> + return out_mapping;
> }
>
> static const struct uvc_control_mapping uvc_ctrl_mappings[] = {
> @@ -843,7 +839,7 @@ static const struct uvc_control_mapping uvc_ctrl_mappings[] = {
> {
> .entity = UVC_GUID_UVC_PROCESSING,
> .selector = UVC_PU_POWER_LINE_FREQUENCY_CONTROL,
> - .add_mapping = uvc_ctrl_add_plf_mapping,
> + .filter_mapping = uvc_ctrl_filter_plf_mapping,
> },
> };
>
> @@ -2411,8 +2407,9 @@ static int uvc_ctrl_add_info(struct uvc_device *dev, struct uvc_control *ctrl,
> /*
> * Add a control mapping to a given control.
> */
> -static int __uvc_ctrl_add_mapping_to_list(struct uvc_video_chain *chain,
> - struct uvc_control *ctrl, const struct uvc_control_mapping *mapping)
> +static int __uvc_ctrl_add_mapping(struct uvc_video_chain *chain,
> + struct uvc_control *ctrl,
> + const struct uvc_control_mapping *mapping)
> {
> struct uvc_control_mapping *map;
> unsigned int size;
> @@ -2485,14 +2482,6 @@ static int __uvc_ctrl_add_mapping_to_list(struct uvc_video_chain *chain,
> return -ENOMEM;
> }
>
> -static int __uvc_ctrl_add_mapping(struct uvc_video_chain *chain,
> - struct uvc_control *ctrl, const struct uvc_control_mapping *mapping)
> -{
> - if (mapping && mapping->add_mapping)
> - return mapping->add_mapping(chain, ctrl, mapping);
> - return __uvc_ctrl_add_mapping_to_list(chain, ctrl, mapping);
> -}
> -
> int uvc_ctrl_add_mapping(struct uvc_video_chain *chain,
> const struct uvc_control_mapping *mapping)
> {
> @@ -2681,7 +2670,14 @@ static void uvc_ctrl_init_ctrl(struct uvc_video_chain *chain,
>
> /* Process common mappings. */
> for (i = 0; i < ARRAY_SIZE(uvc_ctrl_mappings); ++i) {
> - const struct uvc_control_mapping *mapping = &uvc_ctrl_mappings[i];
> + const struct uvc_control_mapping *mapping = NULL;
> +
> + /* Try to get a custom mapping from the device. */
> + if (uvc_ctrl_mappings[i].filter_mapping)
> + mapping = uvc_ctrl_mappings[i].filter_mapping(chain,
> + ctrl);
> + if (!mapping)
> + mapping = &uvc_ctrl_mappings[i];
>
> if (uvc_entity_match_guid(ctrl->entity, mapping->entity) &&
> ctrl->info.selector == mapping->selector)
> diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> index ff9545dcf716..a9547795fe22 100644
> --- a/drivers/media/usb/uvc/uvcvideo.h
> +++ b/drivers/media/usb/uvc/uvcvideo.h
> @@ -125,9 +125,9 @@ struct uvc_control_mapping {
> s32 master_manual;
> u32 slave_ids[2];
>
> - int (*add_mapping)(struct uvc_video_chain *chain,
> - struct uvc_control *ctrl,
> - const struct uvc_control_mapping *mapping);
> + const struct uvc_control_mapping *(*filter_mapping)
> + (struct uvc_video_chain *chain,
> + struct uvc_control *ctrl);
> s32 (*get)(struct uvc_control_mapping *mapping, u8 query,
> const u8 *data);
> void (*set)(struct uvc_control_mapping *mapping, s32 value,
>
--
Regards,
Laurent Pinchart
prev parent reply other threads:[~2024-06-16 22:17 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-10 23:09 [PATCH v2 0/7] media: uvc: Probe PLF limits at start-up Ricardo Ribalda
2024-06-10 23:09 ` [PATCH v2 1/7] media: uvcvideo: Allow custom control mapping Ricardo Ribalda
2024-06-16 23:06 ` Laurent Pinchart
2024-06-10 23:09 ` [PATCH v2 2/7] media: uvcvideo: Refactor Power Line Frequency limit selection Ricardo Ribalda
2024-06-16 23:03 ` Laurent Pinchart
2024-06-10 23:09 ` [PATCH v2 3/7] media: uvcvideo: Probe the PLF characteristics Ricardo Ribalda
2024-06-16 23:04 ` Laurent Pinchart
2024-06-10 23:09 ` [PATCH v2 4/7] media: uvcvideo: Cleanup version-specific mapping Ricardo Ribalda
2024-06-10 23:09 ` [PATCH v2 5/7] media: uvcvideo: Remove PLF device quirking Ricardo Ribalda
2024-06-16 23:05 ` Laurent Pinchart
2024-06-10 23:09 ` [PATCH v2 6/7] media: uvcvideo: Remove mappings form uvc_device_info Ricardo Ribalda
2024-06-16 23:05 ` Laurent Pinchart
2024-06-10 23:09 ` [PATCH v2 7/7] media: uvcvideo: Replace get_mapping with filter_mapping Ricardo Ribalda
2024-06-16 22:17 ` Laurent Pinchart [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240616221733.GA28126@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=ribalda@chromium.org \
--cc=senozhatsky@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox