From: kernel test robot <lkp@intel.com>
To: Peter Yin <peteryin.openbmc@gmail.com>,
patrick@stwcx.xyz, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Cc: oe-kbuild-all@lists.linux.dev
Subject: Re: [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device
Date: Mon, 17 Jun 2024 04:04:17 +0800 [thread overview]
Message-ID: <202406170350.zQo7bJdX-lkp@intel.com> (raw)
In-Reply-To: <20240613152425.1582059-3-peteryin.openbmc@gmail.com>
Hi Peter,
kernel test robot noticed the following build warnings:
[auto build test WARNING on robh/for-next]
[also build test WARNING on linus/master v6.10-rc3 next-20240613]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Peter-Yin/ARM-dts-aspeed-Harma-revise-hsc-chip/20240613-232915
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link: https://lore.kernel.org/r/20240613152425.1582059-3-peteryin.openbmc%40gmail.com
patch subject: [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device
config: arm-randconfig-051-20240614 (https://download.01.org/0day-ci/archive/20240617/202406170350.zQo7bJdX-lkp@intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 13.2.0
dtschema version: 2024.6.dev1+g833054f
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240617/202406170350.zQo7bJdX-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202406170350.zQo7bJdX-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
>> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts:409.21-412.6: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@63: I2C bus unit address format error, expected "61"
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:655.36-659.7: Warning (unique_unit_address_if_enabled): /ahb/apb/lpc@1e789000/reset-controller@98: duplicate unit-address (also used in node /ahb/apb/lpc@1e789000/uart-routing@98)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /: spi-gpio: {'status': ['okay'], 'compatible': ['spi-gpio'], '#address-cells': [[1]], '#size-cells': [[0]], 'gpio-sck': [[58, 203, 0]], 'gpio-mosi': [[58, 204, 0]], 'gpio-miso': [[58, 205, 0]], 'num-chipselects': [[1]], 'cs-gpios': [[58, 200, 1]], 'tpmdev@0': {'compatible': ['infineon,slb9670', 'tcg,tpm_tis-spi'], 'spi-max-frequency': [[33000000]], 'reg': [[0]]}} is not of type 'array'
from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: ftgmac@1e660000: $nodename:0: 'ftgmac@1e660000' does not match '^ethernet(@.*)?$'
from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml#
--
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: serial@1e78d000: pinctrl-0: True is not of type 'array'
from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: serial@1e78f000: pinctrl-0: True is not of type 'array'
from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@80/pwm@5e: failed to match any schema with compatible: ['max31790']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@180/pwm@5e: failed to match any schema with compatible: ['max31790']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@280/power-monitor@69: failed to match any schema with compatible: ['pmbus']
>> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@61: failed to match any schema with compatible: ['isil,isl69260']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@62: failed to match any schema with compatible: ['isil,isl69260']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@63: failed to match any schema with compatible: ['isil,isl69260']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@780/ipmb@10: failed to match any schema with compatible: ['ipmb-dev']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: spi-gpio: $nodename:0: 'spi-gpio' does not match '^spi(@.*|-([0-9]|[1-9][0-9]+))?$'
from schema $id: http://devicetree.org/schemas/spi/spi-gpio.yaml#
vim +/61 +409 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
387
388 &i2c13 {
389 status = "okay";
390
391 i2c-mux@70 {
392 compatible = "nxp,pca9545";
393 reg = <0x70>;
394 #address-cells = <1>;
395 #size-cells = <0>;
396
397 imux28: i2c@0 {
398 #address-cells = <1>;
399 #size-cells = <0>;
400 reg = <0>;
401 power-monitor@61 {
402 compatible = "isil,isl69260";
403 reg = <0x61>;
404 };
405 power-monitor@62 {
406 compatible = "isil,isl69260";
407 reg = <0x62>;
408 };
> 409 power-monitor@63 {
410 compatible = "isil,isl69260";
411 reg = <0x61>;
412 };
413 power-monitor@64 {
414 compatible = "infineon,xdpe152c4";
415 reg = <0x64>;
416 };
417 power-monitor@66 {
418 compatible = "infineon,xdpe152c4";
419 reg = <0x66>;
420 };
421 power-monitor@68 {
422 compatible = "infineon,xdpe152c4";
423 reg = <0x68>;
424 };
425 };
426 imux29: i2c@1 {
427 #address-cells = <1>;
428 #size-cells = <0>;
429 reg = <1>;
430 //MB FRU
431 eeprom@54 {
432 compatible = "atmel,24c64";
433 reg = <0x54>;
434 };
435 };
436 imux30: i2c@2 {
437 #address-cells = <1>;
438 #size-cells = <0>;
439 reg = <2>;
440 };
441 imux31: i2c@3 {
442 #address-cells = <1>;
443 #size-cells = <0>;
444 reg = <3>;
445 };
446 };
447 };
448
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
next prev parent reply other threads:[~2024-06-16 20:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-13 15:24 [PATCH v1 0/7] Revise Meta(Facebook) Harma BMC(AST2600) Peter Yin
2024-06-13 15:24 ` [PATCH v1 1/7] ARM: dts: aspeed: Harma: revise hsc chip Peter Yin
2024-06-13 15:24 ` [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device Peter Yin
2024-06-16 20:04 ` kernel test robot [this message]
2024-06-13 15:24 ` [PATCH v1 3/7] ARM: dts: aspeed: Harma: add sgpio name Peter Yin
2024-06-13 15:24 ` [PATCH v1 4/7] ARM: dts: aspeed: Harma: add ina238 Peter Yin
2024-06-13 15:24 ` [PATCH v1 5/7] ARM: dts: aspeed: Harma: add power monitor xdp710 Peter Yin
2024-06-13 15:24 ` [PATCH v1 6/7] ARM: dts: aspeed: Harma: remove multi-host property Peter Yin
2024-06-17 19:18 ` kernel test robot
2024-06-17 23:50 ` Andrew Jeffery
2024-06-13 15:24 ` [PATCH v1 7/7] ARM: dts: aspeed: Harma: remove pca9546 Peter Yin
2024-06-17 7:41 ` Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202406170350.zQo7bJdX-lkp@intel.com \
--to=lkp@intel.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=patrick@stwcx.xyz \
--cc=peteryin.openbmc@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox