[PATCH 01/10] hwmon: (amc6821) Stop accepting invalid pwm values

[Guenter Roeck <linux@roeck-us.net>]

The pwm value range is well defined from 0..255. Don't accept
any values outside this range.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/hwmon/amc6821.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index 9b02b304c2f5..3c614a0bd192 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -360,8 +360,11 @@ static ssize_t pwm1_store(struct device *dev,
 	if (ret)
 		return ret;
 
+	if (val < 0 || val > 255)
+		return -EINVAL;
+
 	mutex_lock(&data->update_lock);
-	data->pwm1 = clamp_val(val , 0, 255);
+	data->pwm1 = val;
 	i2c_smbus_write_byte_data(client, AMC6821_REG_DCY, data->pwm1);
 	mutex_unlock(&data->update_lock);
 	return count;
@@ -558,13 +561,16 @@ static ssize_t pwm1_auto_point_pwm_store(struct device *dev,
 	struct amc6821_data *data = dev_get_drvdata(dev);
 	struct i2c_client *client = data->client;
 	int dpwm;
-	long val;
-	int ret = kstrtol(buf, 10, &val);
+	unsigned long val;
+	int ret = kstrtoul(buf, 10, &val);
 	if (ret)
 		return ret;
 
+	if (val > 255)
+		return -EINVAL;
+
 	mutex_lock(&data->update_lock);
-	data->pwm1_auto_point_pwm[1] = clamp_val(val, 0, 254);
+	data->pwm1_auto_point_pwm[1] = val;
 	if (i2c_smbus_write_byte_data(client, AMC6821_REG_DCY_LOW_TEMP,
 			data->pwm1_auto_point_pwm[1])) {
 		dev_err(&client->dev, "Register write error, aborting.\n");
-- 
2.39.2