public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
To: "David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Jesse Brandeburg <jesse.brandeburg@intel.com>,
	Tony Nguyen <anthony.l.nguyen@intel.com>,
	Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org,
	Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Subject: [PATCH iwl-net v1 1/4] igc: Fix qbv_config_change_errors logics
Date: Tue,  2 Jul 2024 00:09:23 -0400	[thread overview]
Message-ID: <20240702040926.3327530-2-faizal.abdul.rahim@linux.intel.com> (raw)
In-Reply-To: <20240702040926.3327530-1-faizal.abdul.rahim@linux.intel.com>

When user issues these cmds:
1. Either a) or b)
   a) mqprio with hardware offload disabled
   b) taprio with txtime-assist feature enabled
2. etf
3. tc qdisc delete
4. taprio with base time in the past

At step 4, qbv_config_change_errors wrongly increased by 1.

Excerpt from IEEE 802.1Q-2018 8.6.9.3.1:
"If AdminBaseTime specifies a time in the past, and the current schedule
is running, then: Increment ConfigChangeError counter"

qbv_config_change_errors should only increase if base time is in the past
and no taprio is active. In user perspective, taprio was not active when
first triggered at step 4. However, i225/6 reuses qbv for etf, so qbv is
enabled with a dummy schedule at step 2 where it enters
igc_tsn_enable_offload() and qbv_count got incremented to 1. At step 4, it
enters igc_tsn_enable_offload() again, qbv_count is incremented to 2.
Because taprio is running, tc_setup_type is TC_SETUP_QDISC_ETF and
qbv_count > 1, qbv_config_change_errors value got incremented.

This issue happens due to reliance on qbv_count field where a non-zero
value indicates that taprio is running. But qbv_count increases
regardless if taprio is triggered by user or by other tsn feature. It does
not align with qbv_config_change_errors expectation where it is only
concerned with taprio triggered by user.

Fixing this by relocating the qbv_config_change_errors logic to
igc_save_qbv_schedule(), eliminating reliance on qbv_count and its
inaccuracies from i225/6's multiple uses of qbv feature for other TSN
features.

The new function created: igc_tsn_is_taprio_activated_by_user() uses
taprio_offload_enable field to indicate that the current running taprio
was triggered by user, instead of triggered by non-qbv feature like etf.

Fixes: ae4fe4698300 ("igc: Add qbv_config_change_errors counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
---
 drivers/net/ethernet/intel/igc/igc_main.c |  8 ++++++--
 drivers/net/ethernet/intel/igc/igc_tsn.c  | 19 +++++++++++--------
 drivers/net/ethernet/intel/igc/igc_tsn.h  |  1 +
 3 files changed, 18 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 305e05294a26..0f8a5ad940ec 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -6334,12 +6334,16 @@ static int igc_save_qbv_schedule(struct igc_adapter *adapter,
 	if (!validate_schedule(adapter, qopt))
 		return -EINVAL;
 
+	igc_ptp_read(adapter, &now);
+
+	if (igc_tsn_is_taprio_activated_by_user(adapter) &&
+	    is_base_time_past(qopt->base_time, &now))
+		adapter->qbv_config_change_errors++;
+
 	adapter->cycle_time = qopt->cycle_time;
 	adapter->base_time = qopt->base_time;
 	adapter->taprio_offload_enable = true;
 
-	igc_ptp_read(adapter, &now);
-
 	for (n = 0; n < qopt->num_entries; n++) {
 		struct tc_taprio_sched_entry *e = &qopt->entries[n];
 
diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.c b/drivers/net/ethernet/intel/igc/igc_tsn.c
index 22cefb1eeedf..02dd41aff634 100644
--- a/drivers/net/ethernet/intel/igc/igc_tsn.c
+++ b/drivers/net/ethernet/intel/igc/igc_tsn.c
@@ -78,6 +78,17 @@ void igc_tsn_adjust_txtime_offset(struct igc_adapter *adapter)
 	wr32(IGC_GTXOFFSET, txoffset);
 }
 
+bool igc_tsn_is_taprio_activated_by_user(struct igc_adapter *adapter)
+{
+	struct igc_hw *hw = &adapter->hw;
+
+	if ((rd32(IGC_BASET_H) || rd32(IGC_BASET_L)) &&
+	    adapter->taprio_offload_enable)
+		return true;
+	else
+		return false;
+}
+
 /* Returns the TSN specific registers to their default values after
  * the adapter is reset.
  */
@@ -262,14 +273,6 @@ static int igc_tsn_enable_offload(struct igc_adapter *adapter)
 		s64 n = div64_s64(ktime_sub_ns(systim, base_time), cycle);
 
 		base_time = ktime_add_ns(base_time, (n + 1) * cycle);
-
-		/* Increase the counter if scheduling into the past while
-		 * Gate Control List (GCL) is running.
-		 */
-		if ((rd32(IGC_BASET_H) || rd32(IGC_BASET_L)) &&
-		    (adapter->tc_setup_type == TC_SETUP_QDISC_TAPRIO) &&
-		    (adapter->qbv_count > 1))
-			adapter->qbv_config_change_errors++;
 	} else {
 		if (igc_is_device_id_i226(hw)) {
 			ktime_t adjust_time, expires_time;
diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.h b/drivers/net/ethernet/intel/igc/igc_tsn.h
index b53e6af560b7..98ec845a86bf 100644
--- a/drivers/net/ethernet/intel/igc/igc_tsn.h
+++ b/drivers/net/ethernet/intel/igc/igc_tsn.h
@@ -7,5 +7,6 @@
 int igc_tsn_offload_apply(struct igc_adapter *adapter);
 int igc_tsn_reset(struct igc_adapter *adapter);
 void igc_tsn_adjust_txtime_offset(struct igc_adapter *adapter);
+bool igc_tsn_is_taprio_activated_by_user(struct igc_adapter *adapter);
 
 #endif /* _IGC_BASE_H */
-- 
2.25.1


  reply	other threads:[~2024-07-02  4:11 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-02  4:09 [PATCH iwl-net v1 0/4] igc bug fixes related to qbv_count usage Faizal Rahim
2024-07-02  4:09 ` Faizal Rahim [this message]
2024-07-03 15:08   ` [PATCH iwl-net v1 1/4] igc: Fix qbv_config_change_errors logics Simon Horman
2024-07-05 16:58     ` Abdul Rahim, Faizal
2024-07-02  4:09 ` [PATCH iwl-net v1 2/4] igc: Fix reset adapter logics when tx mode change Faizal Rahim
2024-07-03 15:03   ` Simon Horman
2024-07-05 16:52     ` Abdul Rahim, Faizal
2024-07-02  4:09 ` [PATCH iwl-net v1 3/4] igc: Remove unused qbv_count Faizal Rahim
2024-07-03 15:10   ` Simon Horman
2024-07-05 16:47     ` Abdul Rahim, Faizal
2024-07-02  4:09 ` [PATCH iwl-net v1 4/4] igc: Fix qbv tx latency by setting gtxoffset Faizal Rahim
2024-07-03 15:10   ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240702040926.3327530-2-faizal.abdul.rahim@linux.intel.com \
    --to=faizal.abdul.rahim@linux.intel.com \
    --cc=anthony.l.nguyen@intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=jesse.brandeburg@intel.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=stable@vger.kernel.org \
    --cc=vinicius.gomes@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox