From: Guenter Roeck <linux@roeck-us.net>
To: linux-hwmon@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Farouk Bouabid <farouk.bouabid@cherry.de>,
Quentin Schulz <quentin.schulz@cherry.de>,
Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH v3 06/11] hwmon: (amc6821) Use tabs for column alignment in defines
Date: Thu, 4 Jul 2024 10:52:02 -0700 [thread overview]
Message-ID: <20240704175207.2684012-7-linux@roeck-us.net> (raw)
In-Reply-To: <20240704175207.2684012-1-linux@roeck-us.net>
Using tabs for column alignment makes the code easier to read.
No functional change intended.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3: No change
v2: Add Quentin's Reviewed-by: tag
drivers/hwmon/amc6821.c | 128 ++++++++++++++++++++--------------------
1 file changed, 64 insertions(+), 64 deletions(-)
diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index 8869dbe5a733..bb20ccde5fea 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -37,77 +37,77 @@ module_param(init, int, 0444);
enum chips { amc6821 };
-#define AMC6821_REG_DEV_ID 0x3D
-#define AMC6821_REG_COMP_ID 0x3E
-#define AMC6821_REG_CONF1 0x00
-#define AMC6821_REG_CONF2 0x01
-#define AMC6821_REG_CONF3 0x3F
-#define AMC6821_REG_CONF4 0x04
-#define AMC6821_REG_STAT1 0x02
-#define AMC6821_REG_STAT2 0x03
-#define AMC6821_REG_TDATA_LOW 0x08
-#define AMC6821_REG_TDATA_HI 0x09
-#define AMC6821_REG_LTEMP_HI 0x0A
-#define AMC6821_REG_RTEMP_HI 0x0B
-#define AMC6821_REG_LTEMP_LIMIT_MIN 0x15
-#define AMC6821_REG_LTEMP_LIMIT_MAX 0x14
-#define AMC6821_REG_RTEMP_LIMIT_MIN 0x19
-#define AMC6821_REG_RTEMP_LIMIT_MAX 0x18
-#define AMC6821_REG_LTEMP_CRIT 0x1B
-#define AMC6821_REG_RTEMP_CRIT 0x1D
-#define AMC6821_REG_PSV_TEMP 0x1C
-#define AMC6821_REG_DCY 0x22
-#define AMC6821_REG_LTEMP_FAN_CTRL 0x24
-#define AMC6821_REG_RTEMP_FAN_CTRL 0x25
-#define AMC6821_REG_DCY_LOW_TEMP 0x21
+#define AMC6821_REG_DEV_ID 0x3D
+#define AMC6821_REG_COMP_ID 0x3E
+#define AMC6821_REG_CONF1 0x00
+#define AMC6821_REG_CONF2 0x01
+#define AMC6821_REG_CONF3 0x3F
+#define AMC6821_REG_CONF4 0x04
+#define AMC6821_REG_STAT1 0x02
+#define AMC6821_REG_STAT2 0x03
+#define AMC6821_REG_TDATA_LOW 0x08
+#define AMC6821_REG_TDATA_HI 0x09
+#define AMC6821_REG_LTEMP_HI 0x0A
+#define AMC6821_REG_RTEMP_HI 0x0B
+#define AMC6821_REG_LTEMP_LIMIT_MIN 0x15
+#define AMC6821_REG_LTEMP_LIMIT_MAX 0x14
+#define AMC6821_REG_RTEMP_LIMIT_MIN 0x19
+#define AMC6821_REG_RTEMP_LIMIT_MAX 0x18
+#define AMC6821_REG_LTEMP_CRIT 0x1B
+#define AMC6821_REG_RTEMP_CRIT 0x1D
+#define AMC6821_REG_PSV_TEMP 0x1C
+#define AMC6821_REG_DCY 0x22
+#define AMC6821_REG_LTEMP_FAN_CTRL 0x24
+#define AMC6821_REG_RTEMP_FAN_CTRL 0x25
+#define AMC6821_REG_DCY_LOW_TEMP 0x21
-#define AMC6821_REG_TACH_LLIMITL 0x10
-#define AMC6821_REG_TACH_LLIMITH 0x11
-#define AMC6821_REG_TACH_HLIMITL 0x12
-#define AMC6821_REG_TACH_HLIMITH 0x13
-#define AMC6821_REG_TACH_SETTINGL 0x1e
-#define AMC6821_REG_TACH_SETTINGH 0x1f
+#define AMC6821_REG_TACH_LLIMITL 0x10
+#define AMC6821_REG_TACH_LLIMITH 0x11
+#define AMC6821_REG_TACH_HLIMITL 0x12
+#define AMC6821_REG_TACH_HLIMITH 0x13
+#define AMC6821_REG_TACH_SETTINGL 0x1e
+#define AMC6821_REG_TACH_SETTINGH 0x1f
-#define AMC6821_CONF1_START 0x01
-#define AMC6821_CONF1_FAN_INT_EN 0x02
-#define AMC6821_CONF1_FANIE 0x04
-#define AMC6821_CONF1_PWMINV 0x08
-#define AMC6821_CONF1_FAN_FAULT_EN 0x10
-#define AMC6821_CONF1_FDRC0 0x20
-#define AMC6821_CONF1_FDRC1 0x40
-#define AMC6821_CONF1_THERMOVIE 0x80
+#define AMC6821_CONF1_START 0x01
+#define AMC6821_CONF1_FAN_INT_EN 0x02
+#define AMC6821_CONF1_FANIE 0x04
+#define AMC6821_CONF1_PWMINV 0x08
+#define AMC6821_CONF1_FAN_FAULT_EN 0x10
+#define AMC6821_CONF1_FDRC0 0x20
+#define AMC6821_CONF1_FDRC1 0x40
+#define AMC6821_CONF1_THERMOVIE 0x80
-#define AMC6821_CONF2_PWM_EN 0x01
-#define AMC6821_CONF2_TACH_MODE 0x02
-#define AMC6821_CONF2_TACH_EN 0x04
-#define AMC6821_CONF2_RTFIE 0x08
-#define AMC6821_CONF2_LTOIE 0x10
-#define AMC6821_CONF2_RTOIE 0x20
-#define AMC6821_CONF2_PSVIE 0x40
-#define AMC6821_CONF2_RST 0x80
+#define AMC6821_CONF2_PWM_EN 0x01
+#define AMC6821_CONF2_TACH_MODE 0x02
+#define AMC6821_CONF2_TACH_EN 0x04
+#define AMC6821_CONF2_RTFIE 0x08
+#define AMC6821_CONF2_LTOIE 0x10
+#define AMC6821_CONF2_RTOIE 0x20
+#define AMC6821_CONF2_PSVIE 0x40
+#define AMC6821_CONF2_RST 0x80
-#define AMC6821_CONF3_THERM_FAN_EN 0x80
-#define AMC6821_CONF3_REV_MASK 0x0F
+#define AMC6821_CONF3_THERM_FAN_EN 0x80
+#define AMC6821_CONF3_REV_MASK 0x0F
-#define AMC6821_CONF4_OVREN 0x10
-#define AMC6821_CONF4_TACH_FAST 0x20
-#define AMC6821_CONF4_PSPR 0x40
-#define AMC6821_CONF4_MODE 0x80
+#define AMC6821_CONF4_OVREN 0x10
+#define AMC6821_CONF4_TACH_FAST 0x20
+#define AMC6821_CONF4_PSPR 0x40
+#define AMC6821_CONF4_MODE 0x80
-#define AMC6821_STAT1_RPM_ALARM 0x01
-#define AMC6821_STAT1_FANS 0x02
-#define AMC6821_STAT1_RTH 0x04
-#define AMC6821_STAT1_RTL 0x08
-#define AMC6821_STAT1_R_THERM 0x10
-#define AMC6821_STAT1_RTF 0x20
-#define AMC6821_STAT1_LTH 0x40
-#define AMC6821_STAT1_LTL 0x80
+#define AMC6821_STAT1_RPM_ALARM 0x01
+#define AMC6821_STAT1_FANS 0x02
+#define AMC6821_STAT1_RTH 0x04
+#define AMC6821_STAT1_RTL 0x08
+#define AMC6821_STAT1_R_THERM 0x10
+#define AMC6821_STAT1_RTF 0x20
+#define AMC6821_STAT1_LTH 0x40
+#define AMC6821_STAT1_LTL 0x80
-#define AMC6821_STAT2_RTC 0x08
-#define AMC6821_STAT2_LTC 0x10
-#define AMC6821_STAT2_LPSV 0x20
-#define AMC6821_STAT2_L_THERM 0x40
-#define AMC6821_STAT2_THERM_IN 0x80
+#define AMC6821_STAT2_RTC 0x08
+#define AMC6821_STAT2_LTC 0x10
+#define AMC6821_STAT2_LPSV 0x20
+#define AMC6821_STAT2_L_THERM 0x40
+#define AMC6821_STAT2_THERM_IN 0x80
enum {IDX_TEMP1_INPUT = 0, IDX_TEMP1_MIN, IDX_TEMP1_MAX,
IDX_TEMP1_CRIT, IDX_TEMP2_INPUT, IDX_TEMP2_MIN,
--
2.39.2
next prev parent reply other threads:[~2024-07-04 17:52 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-04 17:51 [PATCH v3 00/11] hwmon: (amc6821) Various improvements Guenter Roeck
2024-07-04 17:51 ` [PATCH v3 01/11] hwmon: (amc6821) Stop accepting invalid pwm values Guenter Roeck
2024-07-04 17:51 ` [PATCH v3 02/11] hwmon: (amc6821) Make reading and writing fan speed limits consistent Guenter Roeck
2024-07-04 17:51 ` [PATCH v3 03/11] hwmon: (amc6821) Rename fan1_div to fan1_pulses Guenter Roeck
2024-07-04 17:52 ` [PATCH v3 04/11] hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4 Guenter Roeck
2024-07-04 17:52 ` [PATCH v3 05/11] hwmon: (amc2821) Reorder include files, drop unnecessary ones Guenter Roeck
2024-07-04 17:52 ` Guenter Roeck [this message]
2024-07-04 17:52 ` [PATCH v3 07/11] hwmon: (amc2821) Use BIT() and GENMASK() Guenter Roeck
2024-07-04 17:52 ` [PATCH v3 08/11] hwmon: (amc6821) Drop unnecessary enum chips Guenter Roeck
2024-07-04 17:52 ` [PATCH v3 09/11] hwmon: (amc6821) Convert to use regmap Guenter Roeck
2024-07-05 10:59 ` Quentin Schulz
2024-07-05 14:28 ` Guenter Roeck
2024-07-08 10:37 ` Quentin Schulz
2024-07-04 17:52 ` [PATCH v3 10/11] hwmon: (amc6821) Convert to with_info API Guenter Roeck
2024-07-04 17:52 ` [PATCH v3 11/11] hwmon: (amc6821) Add support for pwm1_mode attribute Guenter Roeck
2024-07-05 11:00 ` Quentin Schulz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240704175207.2684012-7-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=farouk.bouabid@cherry.de \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quentin.schulz@cherry.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox