From: Guenter Roeck <linux@roeck-us.net>
To: linux-hwmon@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Farouk Bouabid <farouk.bouabid@cherry.de>,
Quentin Schulz <quentin.schulz@cherry.de>,
Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH v3 07/11] hwmon: (amc2821) Use BIT() and GENMASK()
Date: Thu, 4 Jul 2024 10:52:03 -0700 [thread overview]
Message-ID: <20240704175207.2684012-8-linux@roeck-us.net> (raw)
In-Reply-To: <20240704175207.2684012-1-linux@roeck-us.net>
Use BIT() and GENMASK() for bit and mask definitions
to help distinguish bit and mask definitions from other
defines and to make the code easier to read.
No functional change intended.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3: Add Quentin's Reviewed-by: tag
v2: Fix definition of AMC6821_CONF1_FDRC1 in this patch
drivers/hwmon/amc6821.c | 71 +++++++++++++++++++++--------------------
1 file changed, 36 insertions(+), 35 deletions(-)
diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index bb20ccde5fea..546e79ce93b9 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -8,6 +8,7 @@
* Copyright (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
*/
+#include <linux/bits.h>
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
@@ -68,46 +69,46 @@ enum chips { amc6821 };
#define AMC6821_REG_TACH_SETTINGL 0x1e
#define AMC6821_REG_TACH_SETTINGH 0x1f
-#define AMC6821_CONF1_START 0x01
-#define AMC6821_CONF1_FAN_INT_EN 0x02
-#define AMC6821_CONF1_FANIE 0x04
-#define AMC6821_CONF1_PWMINV 0x08
-#define AMC6821_CONF1_FAN_FAULT_EN 0x10
-#define AMC6821_CONF1_FDRC0 0x20
-#define AMC6821_CONF1_FDRC1 0x40
-#define AMC6821_CONF1_THERMOVIE 0x80
+#define AMC6821_CONF1_START BIT(0)
+#define AMC6821_CONF1_FAN_INT_EN BIT(1)
+#define AMC6821_CONF1_FANIE BIT(2)
+#define AMC6821_CONF1_PWMINV BIT(3)
+#define AMC6821_CONF1_FAN_FAULT_EN BIT(4)
+#define AMC6821_CONF1_FDRC0 BIT(5)
+#define AMC6821_CONF1_FDRC1 BIT(6)
+#define AMC6821_CONF1_THERMOVIE BIT(7)
-#define AMC6821_CONF2_PWM_EN 0x01
-#define AMC6821_CONF2_TACH_MODE 0x02
-#define AMC6821_CONF2_TACH_EN 0x04
-#define AMC6821_CONF2_RTFIE 0x08
-#define AMC6821_CONF2_LTOIE 0x10
-#define AMC6821_CONF2_RTOIE 0x20
-#define AMC6821_CONF2_PSVIE 0x40
-#define AMC6821_CONF2_RST 0x80
+#define AMC6821_CONF2_PWM_EN BIT(0)
+#define AMC6821_CONF2_TACH_MODE BIT(1)
+#define AMC6821_CONF2_TACH_EN BIT(2)
+#define AMC6821_CONF2_RTFIE BIT(3)
+#define AMC6821_CONF2_LTOIE BIT(4)
+#define AMC6821_CONF2_RTOIE BIT(5)
+#define AMC6821_CONF2_PSVIE BIT(6)
+#define AMC6821_CONF2_RST BIT(7)
-#define AMC6821_CONF3_THERM_FAN_EN 0x80
-#define AMC6821_CONF3_REV_MASK 0x0F
+#define AMC6821_CONF3_THERM_FAN_EN BIT(7)
+#define AMC6821_CONF3_REV_MASK GENMASK(3, 0)
-#define AMC6821_CONF4_OVREN 0x10
-#define AMC6821_CONF4_TACH_FAST 0x20
-#define AMC6821_CONF4_PSPR 0x40
-#define AMC6821_CONF4_MODE 0x80
+#define AMC6821_CONF4_OVREN BIT(4)
+#define AMC6821_CONF4_TACH_FAST BIT(5)
+#define AMC6821_CONF4_PSPR BIT(6)
+#define AMC6821_CONF4_MODE BIT(7)
-#define AMC6821_STAT1_RPM_ALARM 0x01
-#define AMC6821_STAT1_FANS 0x02
-#define AMC6821_STAT1_RTH 0x04
-#define AMC6821_STAT1_RTL 0x08
-#define AMC6821_STAT1_R_THERM 0x10
-#define AMC6821_STAT1_RTF 0x20
-#define AMC6821_STAT1_LTH 0x40
-#define AMC6821_STAT1_LTL 0x80
+#define AMC6821_STAT1_RPM_ALARM BIT(0)
+#define AMC6821_STAT1_FANS BIT(1)
+#define AMC6821_STAT1_RTH BIT(2)
+#define AMC6821_STAT1_RTL BIT(3)
+#define AMC6821_STAT1_R_THERM BIT(4)
+#define AMC6821_STAT1_RTF BIT(5)
+#define AMC6821_STAT1_LTH BIT(6)
+#define AMC6821_STAT1_LTL BIT(7)
-#define AMC6821_STAT2_RTC 0x08
-#define AMC6821_STAT2_LTC 0x10
-#define AMC6821_STAT2_LPSV 0x20
-#define AMC6821_STAT2_L_THERM 0x40
-#define AMC6821_STAT2_THERM_IN 0x80
+#define AMC6821_STAT2_RTC BIT(3)
+#define AMC6821_STAT2_LTC BIT(4)
+#define AMC6821_STAT2_LPSV BIT(5)
+#define AMC6821_STAT2_L_THERM BIT(6)
+#define AMC6821_STAT2_THERM_IN BIT(7)
enum {IDX_TEMP1_INPUT = 0, IDX_TEMP1_MIN, IDX_TEMP1_MAX,
IDX_TEMP1_CRIT, IDX_TEMP2_INPUT, IDX_TEMP2_MIN,
--
2.39.2
next prev parent reply other threads:[~2024-07-04 17:52 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-04 17:51 [PATCH v3 00/11] hwmon: (amc6821) Various improvements Guenter Roeck
2024-07-04 17:51 ` [PATCH v3 01/11] hwmon: (amc6821) Stop accepting invalid pwm values Guenter Roeck
2024-07-04 17:51 ` [PATCH v3 02/11] hwmon: (amc6821) Make reading and writing fan speed limits consistent Guenter Roeck
2024-07-04 17:51 ` [PATCH v3 03/11] hwmon: (amc6821) Rename fan1_div to fan1_pulses Guenter Roeck
2024-07-04 17:52 ` [PATCH v3 04/11] hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4 Guenter Roeck
2024-07-04 17:52 ` [PATCH v3 05/11] hwmon: (amc2821) Reorder include files, drop unnecessary ones Guenter Roeck
2024-07-04 17:52 ` [PATCH v3 06/11] hwmon: (amc6821) Use tabs for column alignment in defines Guenter Roeck
2024-07-04 17:52 ` Guenter Roeck [this message]
2024-07-04 17:52 ` [PATCH v3 08/11] hwmon: (amc6821) Drop unnecessary enum chips Guenter Roeck
2024-07-04 17:52 ` [PATCH v3 09/11] hwmon: (amc6821) Convert to use regmap Guenter Roeck
2024-07-05 10:59 ` Quentin Schulz
2024-07-05 14:28 ` Guenter Roeck
2024-07-08 10:37 ` Quentin Schulz
2024-07-04 17:52 ` [PATCH v3 10/11] hwmon: (amc6821) Convert to with_info API Guenter Roeck
2024-07-04 17:52 ` [PATCH v3 11/11] hwmon: (amc6821) Add support for pwm1_mode attribute Guenter Roeck
2024-07-05 11:00 ` Quentin Schulz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240704175207.2684012-8-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=farouk.bouabid@cherry.de \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quentin.schulz@cherry.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox