[PATCH net-next v23 12/13] realtek: Update the Makefile and Kconfig in the realtek folder

Justin Lai
2024-07-10T03:40:22Z

1. Add the RTASE entry in the Kconfig.
2. Add the CONFIG_RTASE entry in the Makefile.

Signed-off-by: Justin Lai <justinlai0215@realtek.com>
---
drivers/net/ethernet/realtek/Kconfig | 19 +++++++++++++++++++
drivers/net/ethernet/realtek/Makefile | 1 +
2 files changed, 20 insertions(+)

diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
index 03015b665f4e..8a8ea51c639e 100644
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -120,4 +120,23 @@ config R8169_LEDS
Optional support for controlling the NIC LED's with the netdev
LED trigger.

+config RTASE
+ tristate "Realtek Automotive Switch 9054/9068/9072/9075/9068/9071 PCIe Interface support"
+ depends on PCI
+ select CRC32
+ select PAGE_POOL
+ help
+ Say Y here and it will be compiled and linked with the kernel
+ if you have a Realtek Ethernet adapter belonging to the
+ following families:
+ RTL9054 5GBit Ethernet
+ RTL9068 5GBit Ethernet
+ RTL9072 5GBit Ethernet
+ RTL9075 5GBit Ethernet
+ RTL9068 5GBit Ethernet
+ RTL9071 5GBit Ethernet
+
+ To compile this driver as a module, choose M here: the module
+ will be called rtase. This is recommended.
+
endif # NET_VENDOR_REALTEK
diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile
index 635491d8826e..046adf503ff4 100644
--- a/drivers/net/ethernet/realtek/Makefile
+++ b/drivers/net/ethernet/realtek/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_ATP) += atp.o
r8169-y += r8169_main.o r8169_firmware.o r8169_phy_config.o
r8169-$(CONFIG_R8169_LEDS) += r8169_leds.o
obj-$(CONFIG_R8169) += r8169.o
+obj-$(CONFIG_RTASE) += rtase/
--
2.34.1