From: Andres Salomon <dilinger@queued.net>
To: linux-kernel@vger.kernel.org
Cc: "Pali Rohár" <pali@kernel.org>,
platform-driver-x86@vger.kernel.org,
"Matthew Garrett" <mjg59@srcf.ucam.org>,
"Sebastian Reichel" <sre@kernel.org>,
"Hans de Goede" <hdegoede@redhat.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
linux-pm@vger.kernel.org, Dell.Client.Kernel@dell.com
Subject: [PATCH v2 2/2] platform/x86:dell-laptop: remove duplicate code w/ battery function
Date: Tue, 23 Jul 2024 22:07:24 -0400 [thread overview]
Message-ID: <20240723220724.4f8eaf49@5400> (raw)
In-Reply-To: <20240723220502.77cb0401@5400>
The dell battery patch added dell_send_request_by_token_loc(), which
encapsulates a very common pattern when SMBIOS queries are addressed
to token->location. This sets up the function to be used throughout
the dell laptop code, and calls it in various places allowing us to
delete a bunch of code.
Also some very minor cleanups:
- mark the kbd init functions as __init
- don't read buffer.output unless dell_send_request() was successful.
No behavior changes, other than the delayed read of buffer.output.
Signed-off-by: Andres Salomon <dilinger@queued.net>
---
drivers/platform/x86/dell/dell-laptop.c | 148 ++++++++----------------
1 file changed, 48 insertions(+), 100 deletions(-)
diff --git a/drivers/platform/x86/dell/dell-laptop.c b/drivers/platform/x86/dell/dell-laptop.c
index aae9a95fb188..facf00c8289d 100644
--- a/drivers/platform/x86/dell/dell-laptop.c
+++ b/drivers/platform/x86/dell/dell-laptop.c
@@ -367,6 +367,25 @@ static const struct dmi_system_id dell_quirks[] __initconst = {
{ }
};
+/* -1 is a sentinel value, telling us to use token->value */
+#define USE_TVAL ((u32) -1)
+static int dell_send_request_by_token_loc(struct calling_interface_buffer *buffer,
+ u16 class, u16 select, int type,
+ u32 val)
+{
+ struct calling_interface_token *token;
+
+ token = dell_smbios_find_token(type);
+ if (!token)
+ return -ENODEV;
+
+ if (val == USE_TVAL)
+ val = token->value;
+
+ dell_fill_request(buffer, token->location, val, 0, 0);
+ return dell_send_request(buffer, class, select);
+}
+
/*
* Derived from information in smbios-wireless-ctl:
*
@@ -909,43 +928,24 @@ static void dell_cleanup_rfkill(void)
static int dell_send_intensity(struct backlight_device *bd)
{
struct calling_interface_buffer buffer;
- struct calling_interface_token *token;
- int ret;
-
- token = dell_smbios_find_token(BRIGHTNESS_TOKEN);
- if (!token)
- return -ENODEV;
+ u16 pwr;
- dell_fill_request(&buffer,
- token->location, bd->props.brightness, 0, 0);
- if (power_supply_is_system_supplied() > 0)
- ret = dell_send_request(&buffer,
- CLASS_TOKEN_WRITE, SELECT_TOKEN_AC);
- else
- ret = dell_send_request(&buffer,
- CLASS_TOKEN_WRITE, SELECT_TOKEN_BAT);
-
- return ret;
+ pwr = power_supply_is_system_supplied() > 0 ?
+ SELECT_TOKEN_AC : SELECT_TOKEN_BAT;
+ return dell_send_request_by_token_loc(&buffer, CLASS_TOKEN_WRITE,
+ pwr, BRIGHTNESS_TOKEN, bd->props.brightness);
}
static int dell_get_intensity(struct backlight_device *bd)
{
struct calling_interface_buffer buffer;
- struct calling_interface_token *token;
int ret;
+ u16 pwr;
- token = dell_smbios_find_token(BRIGHTNESS_TOKEN);
- if (!token)
- return -ENODEV;
-
- dell_fill_request(&buffer, token->location, 0, 0, 0);
- if (power_supply_is_system_supplied() > 0)
- ret = dell_send_request(&buffer,
- CLASS_TOKEN_READ, SELECT_TOKEN_AC);
- else
- ret = dell_send_request(&buffer,
- CLASS_TOKEN_READ, SELECT_TOKEN_BAT);
-
+ pwr = power_supply_is_system_supplied() > 0 ?
+ SELECT_TOKEN_AC : SELECT_TOKEN_BAT;
+ ret = dell_send_request_by_token_loc(&buffer, CLASS_TOKEN_READ, pwr,
+ BRIGHTNESS_TOKEN, 0);
if (ret == 0)
ret = buffer.output[1];
@@ -1369,20 +1369,12 @@ static int kbd_set_state_safe(struct kbd_state *state, struct kbd_state *old)
static int kbd_set_token_bit(u8 bit)
{
struct calling_interface_buffer buffer;
- struct calling_interface_token *token;
- int ret;
if (bit >= ARRAY_SIZE(kbd_tokens))
return -EINVAL;
- token = dell_smbios_find_token(kbd_tokens[bit]);
- if (!token)
- return -EINVAL;
-
- dell_fill_request(&buffer, token->location, token->value, 0, 0);
- ret = dell_send_request(&buffer, CLASS_TOKEN_WRITE, SELECT_TOKEN_STD);
-
- return ret;
+ return dell_send_request_by_token_loc(&buffer, CLASS_TOKEN_WRITE,
+ SELECT_TOKEN_STD, kbd_tokens[bit], USE_TVAL);
}
static int kbd_get_token_bit(u8 bit)
@@ -1401,11 +1393,10 @@ static int kbd_get_token_bit(u8 bit)
dell_fill_request(&buffer, token->location, 0, 0, 0);
ret = dell_send_request(&buffer, CLASS_TOKEN_READ, SELECT_TOKEN_STD);
- val = buffer.output[1];
-
if (ret)
return ret;
+ val = buffer.output[1];
return (val == token->value);
}
@@ -1511,7 +1502,7 @@ static inline int kbd_init_info(void)
}
-static inline void kbd_init_tokens(void)
+static inline void __init kbd_init_tokens(void)
{
int i;
@@ -1520,7 +1511,7 @@ static inline void kbd_init_tokens(void)
kbd_token_bits |= BIT(i);
}
-static void kbd_init(void)
+static void __init kbd_init(void)
{
int ret;
@@ -2145,21 +2136,12 @@ static int micmute_led_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
struct calling_interface_buffer buffer;
- struct calling_interface_token *token;
int state = brightness != LED_OFF;
+ u32 val;
- if (state == 0)
- token = dell_smbios_find_token(GLOBAL_MIC_MUTE_DISABLE);
- else
- token = dell_smbios_find_token(GLOBAL_MIC_MUTE_ENABLE);
-
- if (!token)
- return -ENODEV;
-
- dell_fill_request(&buffer, token->location, token->value, 0, 0);
- dell_send_request(&buffer, CLASS_TOKEN_WRITE, SELECT_TOKEN_STD);
-
- return 0;
+ val = state == 0 ? GLOBAL_MIC_MUTE_DISABLE : GLOBAL_MIC_MUTE_ENABLE;
+ return dell_send_request_by_token_loc(&buffer, CLASS_TOKEN_WRITE,
+ SELECT_TOKEN_STD, val, USE_TVAL);
}
static struct led_classdev micmute_led_cdev = {
@@ -2173,21 +2155,12 @@ static int mute_led_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
struct calling_interface_buffer buffer;
- struct calling_interface_token *token;
int state = brightness != LED_OFF;
+ u32 val;
- if (state == 0)
- token = dell_smbios_find_token(GLOBAL_MUTE_DISABLE);
- else
- token = dell_smbios_find_token(GLOBAL_MUTE_ENABLE);
-
- if (!token)
- return -ENODEV;
-
- dell_fill_request(&buffer, token->location, token->value, 0, 0);
- dell_send_request(&buffer, CLASS_TOKEN_WRITE, SELECT_TOKEN_STD);
-
- return 0;
+ val = state == 0 ? GLOBAL_MUTE_DISABLE : GLOBAL_MUTE_ENABLE;
+ return dell_send_request_by_token_loc(&buffer, CLASS_TOKEN_WRITE,
+ SELECT_TOKEN_STD, val, USE_TVAL);
}
static struct led_classdev mute_led_cdev = {
@@ -2197,31 +2170,12 @@ static struct led_classdev mute_led_cdev = {
.default_trigger = "audio-mute",
};
-static int dell_send_request_by_token_loc(struct calling_interface_buffer *buffer,
- u16 class, u16 select, int type,
- u32 val)
-{
- struct calling_interface_token *token;
-
- token = dell_smbios_find_token(type);
- if (!token)
- return -ENODEV;
-
- /* -1 is a sentinel value, telling us to use token->value */
- if (val == (u32)-1)
- val = token->value;
-
- dell_fill_request(buffer, token->location, val, 0, 0);
- return dell_send_request(buffer, class, select);
-}
-
static int dell_battery_set_mode(const int type)
{
struct calling_interface_buffer buffer;
- /* -1 means use the value from the token */
return dell_send_request_by_token_loc(&buffer, CLASS_TOKEN_WRITE,
- SELECT_TOKEN_STD, type, -1);
+ SELECT_TOKEN_STD, type, USE_TVAL);
}
static int dell_battery_read(const int type)
@@ -2470,7 +2424,7 @@ static void __exit dell_battery_exit(void)
static int __init dell_init(void)
{
- struct calling_interface_token *token;
+ struct calling_interface_buffer buffer;
int max_intensity = 0;
int ret;
@@ -2532,16 +2486,10 @@ static int __init dell_init(void)
if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
return 0;
- token = dell_smbios_find_token(BRIGHTNESS_TOKEN);
- if (token) {
- struct calling_interface_buffer buffer;
-
- dell_fill_request(&buffer, token->location, 0, 0, 0);
- ret = dell_send_request(&buffer,
- CLASS_TOKEN_READ, SELECT_TOKEN_AC);
- if (ret == 0)
- max_intensity = buffer.output[3];
- }
+ ret = dell_send_request_by_token_loc(&buffer, CLASS_TOKEN_READ,
+ SELECT_TOKEN_AC, BRIGHTNESS_TOKEN, 0);
+ if (ret == 0)
+ max_intensity = buffer.output[3];
if (max_intensity) {
struct backlight_properties props;
--
2.39.2
--
I'm available for contract & employment work, see:
https://spindle.queued.net/~dilinger/resume-tech.pdf
next prev parent reply other threads:[~2024-07-24 2:07 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-24 2:05 [PATCH v2 1/2] platform/x86:dell-laptop: Add knobs to change battery charge settings Andres Salomon
2024-07-24 2:07 ` Andres Salomon [this message]
2024-07-24 20:50 ` [PATCH v2 2/2] platform/x86:dell-laptop: remove duplicate code w/ battery function Pali Rohár
2024-07-24 20:34 ` [PATCH v2 1/2] platform/x86:dell-laptop: Add knobs to change battery charge settings Pali Rohár
2024-07-24 20:45 ` Pali Rohár
2024-07-24 22:23 ` Andres Salomon
2024-07-24 23:01 ` Pali Rohár
2024-07-25 20:24 ` Andres Salomon
2024-07-25 22:15 ` Pali Rohár
2024-07-25 23:48 ` Armin Wolf
2024-07-26 0:04 ` Pali Rohár
2024-07-26 4:25 ` Andres Salomon
2024-07-26 18:42 ` Armin Wolf
2024-07-26 18:46 ` Armin Wolf
2024-08-07 21:28 ` Andres Salomon
2024-08-07 21:44 ` Pali Rohár
2024-08-07 22:05 ` Andres Salomon
2024-08-07 23:51 ` Sebastian Reichel
2024-08-11 5:28 ` Armin Wolf
2024-08-12 13:54 ` Hans de Goede
-- strict thread matches above, loose matches on Subject: below --
2024-08-15 23:28 [PATCH v3 " Andres Salomon
2024-08-15 23:35 ` [PATCH v2 2/2] platform/x86:dell-laptop: remove duplicate code w/ battery function Andres Salomon
2024-08-16 17:24 ` Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240723220724.4f8eaf49@5400 \
--to=dilinger@queued.net \
--cc=Dell.Client.Kernel@dell.com \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mjg59@srcf.ucam.org \
--cc=pali@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox