From: Lee Jones <lee@kernel.org>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-pwm@vger.kernel.org,
"Bartosz Golaszewski" <brgl@bgdev.pl>,
"Conor Dooley" <conor+dt@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Rob Herring" <robh@kernel.org>,
"Uwe Kleine-König" <ukleinek@kernel.org>,
"Haibo Chen" <haibo.chen@nxp.com>,
"Clark Wang" <xiaoning.wang@nxp.com>,
"Frank Li" <Frank.li@nxp.com>
Subject: Re: [PATCH v7 0/4] ADP5585 GPIO expander, PWM and keypad controller support
Date: Thu, 25 Jul 2024 17:16:16 +0100 [thread overview]
Message-ID: <20240725161616.GJ501857@google.com> (raw)
In-Reply-To: <20240722121100.2855-1-laurent.pinchart@ideasonboard.com>
On Mon, 22 Jul 2024, Laurent Pinchart wrote:
> Hello,
>
> This patch series introduces support for the Analog Devices ADP5585, a
> GPIO expander, PWM and keyboard controller. It models the chip as an MFD
> device, and includes DT bindings (1/4), an MFD driver (2/4) and drivers
> for the GPIO (3/4) and PWM (4/4) functions.
>
> Support for the keypad controller is left out, as I have no means to
> test it at the moment. The chip also includes a tiny reset controller,
> as well as a 3-bit input programmable logic block, which I haven't tried
> to support (and also have no means to test).
>
> The driver is based on an initial version from the NXP BSP kernel, then
> extensively and nearly completely rewritten, with added DT bindings. I
> have nonetheless retained original authorship. Clark, Haibo, if you
> would prefer not being credited and/or listed as authors, please let me
> know.
>
> Compared to v6, this version addresses small review comments. I believe
> it is ready to go, as the PWM and GPIO drivers have been acked by the
> respective subsystem maintainers, and I have addressed Lee's comments on
> the MFD side. Lee, if there's no more issue, could you apply this to
> your tree for v6.12 ?
>
> Clark Wang (1):
> pwm: adp5585: Add Analog Devices ADP5585 support
>
> Haibo Chen (2):
> mfd: adp5585: Add Analog Devices ADP5585 core support
> gpio: adp5585: Add Analog Devices ADP5585 support
>
> Laurent Pinchart (1):
> dt-bindings: mfd: Add Analog Devices ADP5585
>
> .../devicetree/bindings/mfd/adi,adp5585.yaml | 92 +++++++
> .../devicetree/bindings/trivial-devices.yaml | 4 -
> MAINTAINERS | 11 +
> drivers/gpio/Kconfig | 7 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-adp5585.c | 229 ++++++++++++++++++
> drivers/mfd/Kconfig | 12 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/adp5585.c | 205 ++++++++++++++++
> drivers/pwm/Kconfig | 7 +
> drivers/pwm/Makefile | 1 +
> drivers/pwm/pwm-adp5585.c | 184 ++++++++++++++
> include/linux/mfd/adp5585.h | 126 ++++++++++
> 13 files changed, 876 insertions(+), 4 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/adi,adp5585.yaml
> create mode 100644 drivers/gpio/gpio-adp5585.c
> create mode 100644 drivers/mfd/adp5585.c
> create mode 100644 drivers/pwm/pwm-adp5585.c
> create mode 100644 include/linux/mfd/adp5585.h
Note to self: This looks good to go. Merge after -rc1 is released.
--
Lee Jones [李琼斯]
next prev parent reply other threads:[~2024-07-25 16:16 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-22 12:10 [PATCH v7 0/4] ADP5585 GPIO expander, PWM and keypad controller support Laurent Pinchart
2024-07-22 12:10 ` [PATCH v7 1/4] dt-bindings: mfd: Add Analog Devices ADP5585 Laurent Pinchart
2024-07-22 12:10 ` [PATCH v7 2/4] mfd: adp5585: Add Analog Devices ADP5585 core support Laurent Pinchart
2024-07-22 15:51 ` Frank Li
2024-07-22 12:10 ` [PATCH v7 3/4] gpio: adp5585: Add Analog Devices ADP5585 support Laurent Pinchart
2024-07-22 15:50 ` Frank Li
2024-07-22 12:11 ` [PATCH v7 4/4] pwm: " Laurent Pinchart
2024-07-25 16:16 ` Lee Jones [this message]
2024-07-29 10:56 ` [PATCH v7 0/4] ADP5585 GPIO expander, PWM and keypad controller support Laurent Pinchart
2024-08-01 13:10 ` Lee Jones
2024-08-07 10:54 ` Laurent Pinchart
2024-08-16 14:54 ` Lee Jones
2024-08-16 15:27 ` Immutable branch between MFD, GPIO and PWM due for the v6.12 merge window Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240725161616.GJ501857@google.com \
--to=lee@kernel.org \
--cc=Frank.li@nxp.com \
--cc=brgl@bgdev.pl \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=haibo.chen@nxp.com \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=robh@kernel.org \
--cc=ukleinek@kernel.org \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox