From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Ping-Ke Shih <pkshih@realtek.com>,
Shichao Lai <shichaorai@gmail.com>,
Sasha Levin <sashal@kernel.org>,
kvalo@kernel.org, linux-wireless@vger.kernel.org
Subject: [PATCH AUTOSEL 6.10 04/27] wifi: rtlwifi: handle return value of usb init TX/RX
Date: Sat, 27 Jul 2024 20:52:47 -0400 [thread overview]
Message-ID: <20240728005329.1723272-4-sashal@kernel.org> (raw)
In-Reply-To: <20240728005329.1723272-1-sashal@kernel.org>
From: Ping-Ke Shih <pkshih@realtek.com>
[ Upstream commit 9c4fde42cce05719120cf892a44b76ff61d908c7 ]
Handle error code to cause failed to USB probe result from unexpected
USB EP number, otherwise when USB disconnect skb_dequeue() an uninitialized
skb list and cause warnings below.
usb 2-1: USB disconnect, device number 76
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 54060 Comm: kworker/0:1 Not tainted 6.9.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:114
assign_lock_key kernel/locking/lockdep.c:976 [inline]
register_lock_class+0xc18/0xfa0 kernel/locking/lockdep.c:1289
__lock_acquire+0x108/0x3bc0 kernel/locking/lockdep.c:5014
lock_acquire kernel/locking/lockdep.c:5754 [inline]
lock_acquire+0x1b0/0x550 kernel/locking/lockdep.c:5719
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162
skb_dequeue+0x20/0x180 net/core/skbuff.c:3846
rtl_usb_cleanup drivers/net/wireless/realtek/rtlwifi/usb.c:706 [inline]
rtl_usb_deinit drivers/net/wireless/realtek/rtlwifi/usb.c:721 [inline]
rtl_usb_disconnect+0x4a4/0x850 drivers/net/wireless/realtek/rtlwifi/usb.c:1051
usb_unbind_interface+0x1e8/0x980 drivers/usb/core/driver.c:461
device_remove drivers/base/dd.c:568 [inline]
device_remove+0x122/0x170 drivers/base/dd.c:560
__device_release_driver drivers/base/dd.c:1270 [inline]
device_release_driver_internal+0x443/0x620 drivers/base/dd.c:1293
bus_remove_device+0x22f/0x420 drivers/base/bus.c:574
device_del+0x395/0x9f0 drivers/base/core.c:3909
usb_disable_device+0x360/0x7b0 drivers/usb/core/message.c:1418
usb_disconnect+0x2db/0x930 drivers/usb/core/hub.c:2305
hub_port_connect drivers/usb/core/hub.c:5362 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5662 [inline]
port_event drivers/usb/core/hub.c:5822 [inline]
hub_event+0x1e39/0x4ce0 drivers/usb/core/hub.c:5904
process_one_work+0x97b/0x1a90 kernel/workqueue.c:3267
process_scheduled_works kernel/workqueue.c:3348 [inline]
worker_thread+0x680/0xf00 kernel/workqueue.c:3429
kthread+0x2c7/0x3b0 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Reported-by: Shichao Lai <shichaorai@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CAEk6kZuuezkH1dVRJf3EAVZK-83=OpTz62qCugkpTkswj8JF6w@mail.gmail.com/T/#u
Tested-by: Shichao Lai <shichaorai@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240524003248.5952-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/realtek/rtlwifi/usb.c | 34 +++++++++++++++++-----
1 file changed, 26 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index 2ea72d9e39577..4d2931e544278 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -23,6 +23,8 @@ MODULE_DESCRIPTION("USB basic driver for rtlwifi");
#define MAX_USBCTRL_VENDORREQ_TIMES 10
+static void _rtl_usb_cleanup_tx(struct ieee80211_hw *hw);
+
static void _usbctrl_vendorreq_sync(struct usb_device *udev, u8 reqtype,
u16 value, void *pdata, u16 len)
{
@@ -285,9 +287,23 @@ static int _rtl_usb_init(struct ieee80211_hw *hw)
}
/* usb endpoint mapping */
err = rtlpriv->cfg->usb_interface_cfg->usb_endpoint_mapping(hw);
- rtlusb->usb_mq_to_hwq = rtlpriv->cfg->usb_interface_cfg->usb_mq_to_hwq;
- _rtl_usb_init_tx(hw);
- _rtl_usb_init_rx(hw);
+ if (err)
+ return err;
+
+ rtlusb->usb_mq_to_hwq = rtlpriv->cfg->usb_interface_cfg->usb_mq_to_hwq;
+
+ err = _rtl_usb_init_tx(hw);
+ if (err)
+ return err;
+
+ err = _rtl_usb_init_rx(hw);
+ if (err)
+ goto err_out;
+
+ return 0;
+
+err_out:
+ _rtl_usb_cleanup_tx(hw);
return err;
}
@@ -691,17 +707,13 @@ static int rtl_usb_start(struct ieee80211_hw *hw)
}
/*======================= tx =========================================*/
-static void rtl_usb_cleanup(struct ieee80211_hw *hw)
+static void _rtl_usb_cleanup_tx(struct ieee80211_hw *hw)
{
u32 i;
struct sk_buff *_skb;
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
struct ieee80211_tx_info *txinfo;
- /* clean up rx stuff. */
- _rtl_usb_cleanup_rx(hw);
-
- /* clean up tx stuff */
for (i = 0; i < RTL_USB_MAX_EP_NUM; i++) {
while ((_skb = skb_dequeue(&rtlusb->tx_skb_queue[i]))) {
rtlusb->usb_tx_cleanup(hw, _skb);
@@ -715,6 +727,12 @@ static void rtl_usb_cleanup(struct ieee80211_hw *hw)
usb_kill_anchored_urbs(&rtlusb->tx_submitted);
}
+static void rtl_usb_cleanup(struct ieee80211_hw *hw)
+{
+ _rtl_usb_cleanup_rx(hw);
+ _rtl_usb_cleanup_tx(hw);
+}
+
/* We may add some struct into struct rtl_usb later. Do deinit here. */
static void rtl_usb_deinit(struct ieee80211_hw *hw)
{
--
2.43.0
next prev parent reply other threads:[~2024-07-28 0:53 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-28 0:52 [PATCH AUTOSEL 6.10 01/27] wifi: nl80211: disallow setting special AP channel widths Sasha Levin
2024-07-28 0:52 ` [PATCH AUTOSEL 6.10 02/27] wifi: ath12k: fix race due to setting ATH12K_FLAG_EXT_IRQ_ENABLED too early Sasha Levin
2024-07-28 0:52 ` [PATCH AUTOSEL 6.10 03/27] r8169: remove detection of chip version 11 (early RTL8168b) Sasha Levin
2024-07-29 8:45 ` Heiner Kallweit
2024-08-10 9:12 ` Sasha Levin
2024-08-11 14:32 ` Heiner Kallweit
2024-08-11 21:16 ` Sasha Levin
2025-02-23 0:57 ` Michael Pflüger
2025-02-23 9:43 ` Heiner Kallweit
2024-07-28 0:52 ` Sasha Levin [this message]
2024-07-28 0:52 ` [PATCH AUTOSEL 6.10 05/27] wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() Sasha Levin
2024-07-28 0:52 ` [PATCH AUTOSEL 6.10 06/27] net/mlx5e: SHAMPO, Fix invalid WQ linked list unlink Sasha Levin
2024-07-28 0:52 ` [PATCH AUTOSEL 6.10 07/27] selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT Sasha Levin
2024-07-28 0:52 ` [PATCH AUTOSEL 6.10 08/27] rtnetlink: move rtnl_lock handling out of af_netlink Sasha Levin
2024-07-29 15:01 ` Jakub Kicinski
2024-07-28 0:52 ` [PATCH AUTOSEL 6.10 09/27] wifi: rtw89: pci: fix RX tag race condition resulting in wrong RX length Sasha Levin
2024-07-28 0:52 ` [PATCH AUTOSEL 6.10 10/27] net: Reference bpf_redirect_info via task_struct on PREEMPT_RT Sasha Levin
2024-07-29 15:00 ` Jakub Kicinski
2024-08-10 9:12 ` Sasha Levin
2024-07-28 0:52 ` [PATCH AUTOSEL 6.10 11/27] af_unix: Don't retry after unix_state_lock_nested() in unix_stream_connect() Sasha Levin
2024-07-28 0:52 ` [PATCH AUTOSEL 6.10 12/27] PCI: Add Edimax Vendor ID to pci_ids.h Sasha Levin
2024-07-28 0:52 ` [PATCH AUTOSEL 6.10 13/27] wifi: mac80211: fix NULL dereference at band check in starting tx ba session Sasha Levin
2024-07-28 0:52 ` [PATCH AUTOSEL 6.10 14/27] udf: prevent integer overflow in udf_bitmap_free_blocks() Sasha Levin
2024-07-28 0:52 ` [PATCH AUTOSEL 6.10 15/27] bpf: add missing check_func_arg_reg_off() to prevent out-of-bounds memory accesses Sasha Levin
2024-07-28 0:52 ` [PATCH AUTOSEL 6.10 16/27] wifi: nl80211: don't give key data to userspace Sasha Levin
2024-07-28 0:53 ` [PATCH AUTOSEL 6.10 17/27] can: mcp251xfd: tef: prepare to workaround broken TEF FIFO tail index erratum Sasha Levin
2024-07-28 0:53 ` [PATCH AUTOSEL 6.10 18/27] can: mcp251xfd: tef: update workaround for erratum DS80000789E 6 of mcp2518fd Sasha Levin
2024-07-28 0:53 ` [PATCH AUTOSEL 6.10 19/27] net: stmmac: qcom-ethqos: enable SGMII loopback during DMA reset on sa8775p-ride-r3 Sasha Levin
2024-07-28 0:53 ` [PATCH AUTOSEL 6.10 20/27] mlxsw: pci: Lock configuration space of upstream bridge during reset Sasha Levin
2024-07-28 0:53 ` [PATCH AUTOSEL 6.10 21/27] btrfs: do not clear page dirty inside extent_write_locked_range() Sasha Levin
2024-07-28 0:53 ` [PATCH AUTOSEL 6.10 22/27] btrfs: do not BUG_ON() when freeing tree block after error Sasha Levin
2024-07-28 0:53 ` [PATCH AUTOSEL 6.10 23/27] btrfs: reduce nesting for extent processing at btrfs_lookup_extent_info() Sasha Levin
2024-07-28 0:53 ` [PATCH AUTOSEL 6.10 24/27] btrfs: fix data race when accessing the last_trans field of a root Sasha Levin
2024-07-28 0:53 ` [PATCH AUTOSEL 6.10 25/27] btrfs: fix bitmap leak when loading free space cache on duplicate entry Sasha Levin
2024-07-28 0:53 ` [PATCH AUTOSEL 6.10 26/27] Bluetooth: btnxpuart: Shutdown timer and prevent rearming when driver unloading Sasha Levin
2024-07-28 0:53 ` [PATCH AUTOSEL 6.10 27/27] Bluetooth: btusb: Add RTL8852BE device 0489:e125 to device tables Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240728005329.1723272-4-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=pkshih@realtek.com \
--cc=shichaorai@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox