public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Keita Aihara <keita.aihara@sony.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Jonathan Bell <jonathan@raspberrypi.com>,
	Tim.Bird@sony.com, Shingo.Takeuchi@sony.com,
	Masaya.Takahashi@sony.com, keita.aihara@sony.com,
	linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mmc: core: apply SD quirks earlier during probe
Date: Tue, 6 Aug 2024 10:36:10 +0900	[thread overview]
Message-ID: <20240806013610.GA3438728@sony.com> (raw)
In-Reply-To: <CAPDyKFoTdMpvuXR16OqY8G6t_4jCJDW9+wz=_fBc=kZSL1KbqQ@mail.gmail.com>

On Mon, Aug 05, 2024 at 12:14:25PM +0200, Ulf Hansson wrote:
> On Fri, 2 Aug 2024 at 05:21, Keita Aihara <keita.aihara@sony.com> wrote:
> >
> > Applying MMC_QUIRK_BROKEN_SD_CACHE is broken, as the card's extended
> > registers are parsed prior to the quirk being applied in mmc_blk.
>
> In what way is it a problem to read the extended registers first?

SD quirks are referenced by mmc_card_broken_sd_cache() in
sd_parse_ext_reg_perf(). If the quirk is set, SD_EXT_PERF_CACHE is not
set to card->ext_perf.feature_support and the cache support will not be
enabled.

Therefore, SD quirks should be initialized before parsing the extension
registers.

>
> >
> > Split this out into an SD-specific list of quirks and apply in
> > mmc_sd_init_card instead.
> >
> > Fixes: c467c8f08185 ("mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019")
> > Authored-by: Jonathan Bell <jonathan@raspberrypi.com>
> > Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
> > Signed-off-by: Keita Aihara <keita.aihara@sony.com>
>
> Kind regards
> Uffe

Best regards,
Keita Aihara

>
> > ---
> >  drivers/mmc/core/quirks.h | 22 +++++++++++++---------
> >  drivers/mmc/core/sd.c     |  4 ++++
> >  2 files changed, 17 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h
> > index cca71867bc4a..92905fc46436 100644
> > --- a/drivers/mmc/core/quirks.h
> > +++ b/drivers/mmc/core/quirks.h
> > @@ -15,6 +15,19 @@
> >
> >  #include "card.h"
> >
> > +static const struct mmc_fixup __maybe_unused mmc_sd_fixups[] = {
> > +       /*
> > +        * Kingston Canvas Go! Plus microSD cards never finish SD cache flush.
> > +        * This has so far only been observed on cards from 11/2019, while new
> > +        * cards from 2023/05 do not exhibit this behavior.
> > +        */
> > +       _FIXUP_EXT("SD64G", CID_MANFID_KINGSTON_SD, 0x5449, 2019, 11,
> > +                  0, -1ull, SDIO_ANY_ID, SDIO_ANY_ID, add_quirk_sd,
> > +                  MMC_QUIRK_BROKEN_SD_CACHE, EXT_CSD_REV_ANY),
> > +
> > +       END_FIXUP
> > +};
> > +
> >  static const struct mmc_fixup __maybe_unused mmc_blk_fixups[] = {
> >  #define INAND_CMD38_ARG_EXT_CSD  113
> >  #define INAND_CMD38_ARG_ERASE    0x00
> > @@ -53,15 +66,6 @@ static const struct mmc_fixup __maybe_unused mmc_blk_fixups[] = {
> >         MMC_FIXUP("MMC32G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
> >                   MMC_QUIRK_BLK_NO_CMD23),
> >
> > -       /*
> > -        * Kingston Canvas Go! Plus microSD cards never finish SD cache flush.
> > -        * This has so far only been observed on cards from 11/2019, while new
> > -        * cards from 2023/05 do not exhibit this behavior.
> > -        */
> > -       _FIXUP_EXT("SD64G", CID_MANFID_KINGSTON_SD, 0x5449, 2019, 11,
> > -                  0, -1ull, SDIO_ANY_ID, SDIO_ANY_ID, add_quirk_sd,
> > -                  MMC_QUIRK_BROKEN_SD_CACHE, EXT_CSD_REV_ANY),
> > -
> >         /*
> >          * Some SD cards lockup while using CMD23 multiblock transfers.
> >          */
> > diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> > index 1c8148cdda50..ee37ad14e79e 100644
> > --- a/drivers/mmc/core/sd.c
> > +++ b/drivers/mmc/core/sd.c
> > @@ -26,6 +26,7 @@
> >  #include "host.h"
> >  #include "bus.h"
> >  #include "mmc_ops.h"
> > +#include "quirks.h"
> >  #include "sd.h"
> >  #include "sd_ops.h"
> >
> > @@ -1475,6 +1476,9 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
> >                         goto free_card;
> >         }
> >
> > +       /* Apply quirks prior to card setup */
> > +       mmc_fixup_device(card, mmc_sd_fixups);
> > +
> >         err = mmc_sd_setup_card(host, card, oldcard != NULL);
> >         if (err)
> >                 goto free_card;
> > --
> > 2.43.2
> >

  reply	other threads:[~2024-08-06  1:46 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-02  3:21 [PATCH] mmc: core: apply SD quirks earlier during probe Keita Aihara
2024-08-02  6:53 ` Avri Altman
2024-08-05 10:14 ` Ulf Hansson
2024-08-06  1:36   ` Keita Aihara [this message]
2024-08-20 10:10     ` Ulf Hansson
2024-08-20 23:18       ` Keita Aihara
2024-09-18 14:51 ` Olexa Bilaniuk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240806013610.GA3438728@sony.com \
    --to=keita.aihara@sony.com \
    --cc=Masaya.Takahashi@sony.com \
    --cc=Shingo.Takeuchi@sony.com \
    --cc=Tim.Bird@sony.com \
    --cc=jonathan@raspberrypi.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox