public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Markus Armbruster <armbru@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>,
	Shiju Jose <shiju.jose@huawei.com>,
	"Michael S. Tsirkin" <mst@redhat.com>,
	Ani Sinha <anisinha@redhat.com>,
	Dongjiu Geng <gengdongjiu1@gmail.com>,
	Eric Blake <eblake@redhat.com>,
	Michael Roth <michael.roth@amd.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Peter Maydell <peter.maydell@linaro.org>,
	linux-kernel@vger.kernel.org, qemu-arm@nongnu.org,
	qemu-devel@nongnu.org
Subject: Re: [PATCH v5 5/7] qapi/ghes-cper: add an interface to do generic CPER error injection
Date: Fri, 9 Aug 2024 10:42:22 +0200	[thread overview]
Message-ID: <20240809104222.08d197cb@foz.lan> (raw)
In-Reply-To: <87ikwbrs2o.fsf@pond.sub.org>

Em Thu, 08 Aug 2024 16:45:51 +0200
Markus Armbruster <armbru@redhat.com> escreveu:

> Igor Mammedov <imammedo@redhat.com> writes:
> 
> > On Thu, 8 Aug 2024 16:11:41 +0200
> > Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> >  
> >> Em Thu, 08 Aug 2024 10:50:33 +0200
> >> Markus Armbruster <armbru@redhat.com> escreveu:
> >>   
> >> > Mauro Carvalho Chehab <mchehab+huawei@kernel.org> writes:    
> >>   
> >> > > diff --git a/MAINTAINERS b/MAINTAINERS
> >> > > index 98eddf7ae155..655edcb6688c 100644
> >> > > --- a/MAINTAINERS
> >> > > +++ b/MAINTAINERS
> >> > > @@ -2075,6 +2075,13 @@ F: hw/acpi/ghes.c
> >> > >  F: include/hw/acpi/ghes.h
> >> > >  F: docs/specs/acpi_hest_ghes.rst
> >> > >  
> >> > > +ACPI/HEST/GHES/ARM processor CPER
> >> > > +R: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> >> > > +S: Maintained
> >> > > +F: hw/arm/ghes_cper.c
> >> > > +F: hw/acpi/ghes_cper_stub.c
> >> > > +F: qapi/ghes-cper.json
> >> > > +      
> >> > 
> >> > Here's the reason for creating a new QAPI module instead of adding to
> >> > existing module acpi.json: different maintainers.
> >> > 
> >> > Hypothetical question: if we didn't care for that, would this go into
> >> > qapi/acpi.json?    
> >> 
> >> Independently of maintainers, GHES is part of ACPI APEI HEST, meaning
> >> to report hardware errors. Such hardware errors are typically handled by 
> >> the host OS, so quest doesn't need to be aware of that[1].
> >> 
> >> So, IMO the best would be to keep APEI/HEST/GHES in a separate file.
> >> 
> >> [1] still, I can foresee some scenarios were passing some errors to the
> >>     guest could make sense.
> >>   
> >> > 
> >> > If yes, then should we call it acpi-ghes-cper.json or acpi-ghes.json
> >> > instead?    
> >> 
> >> Naming it as acpi-ghes,acpi-hest or acpi-ghes-cper would equally work
> >> from my side.  
> >
> > if we going to keep it generic, acpi-hest would do  
> 
> Works for me.

Ok, I'll do the rename. With regards to the files implementing
support for it: 

	hw/acpi/ghes_cper.c
	hw/acpi/ghes_cper_stub.c

I guess there's no need to rename them, right? IMO such names
are better than acpi/hest.c, specially since the actual implementation
for HEST is inside acpi/ghes.c.

> 
> >> > >  ppc4xx
> >> > >  L: qemu-ppc@nongnu.org
> >> > >  S: Orphan      
> >> > 
> >> > [...]
> >> >     
> >> > > diff --git a/qapi/ghes-cper.json b/qapi/ghes-cper.json
> >> > > new file mode 100644
> >> > > index 000000000000..3cc4f9f2aaa9
> >> > > --- /dev/null
> >> > > +++ b/qapi/ghes-cper.json
> >> > > @@ -0,0 +1,55 @@
> >> > > +# -*- Mode: Python -*-
> >> > > +# vim: filetype=python
> >> > > +
> >> > > +##
> >> > > +# = GHESv2 CPER Error Injection
> >> > > +#
> >> > > +# These are defined at
> >> > > +# ACPI 6.2: 18.3.2.8 Generic Hardware Error Source version 2
> >> > > +# (GHESv2 - Type 10)
> >> > > +##      
> >> > 
> >> > Feels a bit terse.  These what?
> >> > 
> >> > The reference could be clearer: "defined in the ACPI Specification 6.2,
> >> > section 18.3.2.8 Generic Hardware Error Source version 2".  A link would
> >> > be nice, if it's stable.    
> >> 
> >> I can add a link, but only newer ACPI versions are hosted in html format
> >> (e. g. only versions 6.4 and 6.5 are available as html at uefi.org).  
> >
> > some years earlier it could be said 'stable link' about acpi spec hosted
> > elsewhere. Not the case anymore after umbrella change.
> >
> > spec name, rev, chapter worked fine for acpi code (it's easy to find wherever spec is hosted).
> > Probably the same would work for QAPI, I'm not QAPI maintainer though,
> > so preffered approach here is absolutely up to you.  
> 
> A link is strictly optional.  Stable links are nice, stale links are
> annoying.  Mauro, you decide :)

Well, I guess I'll add a link then, keeping it in text mode as well.

Changing umbrella is something that doesn't happen too often. Hopefully 
those will stay for a long time, if not forever, under uefi.org. 

If not, we can always drop the link.

Thanks,
Mauro

  reply	other threads:[~2024-08-09  8:42 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1722634602.git.mchehab+huawei@kernel.org>
2024-08-02 21:43 ` [PATCH v5 1/7] arm/virt: place power button pin number on a define Mauro Carvalho Chehab
2024-08-06  8:57   ` Igor Mammedov
2024-08-02 21:43 ` [PATCH v5 2/7] acpi/generic_event_device: add an APEI error device Mauro Carvalho Chehab
2024-08-05 16:39   ` Jonathan Cameron
2024-08-06  5:50     ` Mauro Carvalho Chehab
2024-08-06  8:54   ` Igor Mammedov
2024-08-02 21:43 ` [PATCH v5 3/7] arm/virt: Wire up GPIO error source for ACPI / GHES Mauro Carvalho Chehab
2024-08-05 16:54   ` Jonathan Cameron
2024-08-06  5:56     ` Mauro Carvalho Chehab
2024-08-06  9:15   ` Igor Mammedov
2024-08-02 21:43 ` [PATCH v5 4/7] acpi/ghes: Support GPIO error source Mauro Carvalho Chehab
2024-08-05 16:56   ` Jonathan Cameron
2024-08-06  6:09     ` Mauro Carvalho Chehab
2024-08-06  9:18       ` Igor Mammedov
2024-08-06  9:32   ` Igor Mammedov
2024-08-07  7:15     ` Mauro Carvalho Chehab
2024-08-02 21:44 ` [PATCH v5 5/7] qapi/ghes-cper: add an interface to do generic CPER error injection Mauro Carvalho Chehab
2024-08-05 17:00   ` Jonathan Cameron
2024-08-06  9:15   ` Shiju Jose
2024-08-06 12:51   ` Igor Mammedov
2024-08-06 12:58     ` Mauro Carvalho Chehab
2024-08-08  8:50   ` Markus Armbruster
2024-08-08 14:11     ` Mauro Carvalho Chehab
2024-08-08 14:22       ` Igor Mammedov
2024-08-08 14:45         ` Markus Armbruster
2024-08-09  8:42           ` Mauro Carvalho Chehab [this message]
2024-08-02 21:44 ` [PATCH v5 6/7] acpi/ghes: add support for generic error injection via QAPI Mauro Carvalho Chehab
2024-08-05 17:03   ` Jonathan Cameron
2024-08-06 11:13   ` Shiju Jose
2024-08-06 14:31   ` Igor Mammedov
2024-08-07  7:47     ` Mauro Carvalho Chehab
2024-08-07  9:34       ` Jonathan Cameron
2024-08-07 13:23         ` Mauro Carvalho Chehab
2024-08-07 13:43           ` Igor Mammedov
2024-08-07 13:28         ` Igor Mammedov
2024-08-07 14:25     ` Jonathan Cameron
2024-08-08  8:11       ` Igor Mammedov
2024-08-08 18:19         ` Mauro Carvalho Chehab
2024-08-12  9:39           ` Igor Mammedov
2024-08-13 18:59             ` Mauro Carvalho Chehab
2024-08-08 12:11     ` Mauro Carvalho Chehab
2024-08-08 12:45       ` Igor Mammedov
2024-08-02 21:44 ` [PATCH v5 7/7] scripts/ghes_inject: add a script to generate GHES error inject Mauro Carvalho Chehab
2024-08-06 14:56   ` Igor Mammedov
     [not found]   ` <CAFn=p-bM3oECXtPt5zVZSh53dJx+TDciU_N+vCW4Xp-Jd0MaHw@mail.gmail.com>
2024-08-08 21:51     ` Mauro Carvalho Chehab
     [not found]   ` <CAFn=p-Y27zap1P5G3NibdZS26iGwCqh8U0vgW0Vw31f53+oU1w@mail.gmail.com>
2024-08-08 22:41     ` Mauro Carvalho Chehab
2024-08-09  6:26       ` Mauro Carvalho Chehab
2024-08-09  7:37         ` Mauro Carvalho Chehab
     [not found]       ` <CAFn=p-ZM8cgKvUx+5v7YU6TaPZySJL1QnHqjmN5rQpF=D_V=8Q@mail.gmail.com>
2024-08-09  8:24         ` Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240809104222.08d197cb@foz.lan \
    --to=mchehab+huawei@kernel.org \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=anisinha@redhat.com \
    --cc=armbru@redhat.com \
    --cc=eblake@redhat.com \
    --cc=gengdongjiu1@gmail.com \
    --cc=imammedo@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.roth@amd.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=shiju.jose@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox