From: Andrei Simion <andrei.simion@microchip.com>
To: <claudiu.beznea@tuxon.dev>, <nicolas.ferre@microchip.com>,
<alexandre.belloni@bootlin.com>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>, <peda@axentia.se>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<cristian.birsan@microchip.com>,
Andrei Simion <andrei.simion@microchip.com>
Subject: [PATCH 2/5] ARM: dts: microchip: Rename the eeprom nodename
Date: Wed, 14 Aug 2024 15:26:30 +0300 [thread overview]
Message-ID: <20240814122633.198562-3-andrei.simion@microchip.com> (raw)
In-Reply-To: <20240814122633.198562-1-andrei.simion@microchip.com>
Align the eeprom nodename according to devicetree
specification and at24.yaml
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
---
Split the bloated patch into small patches on topics
based on comments:
https://lore.kernel.org/linux-arm-kernel/89f51615-0dee-4ab0-ab72-e3c057fee1e7@tuxon.dev/
---
arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi | 2 +-
arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts | 2 +-
arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts | 2 +-
arch/arm/boot/dts/microchip/at91sam9260ek.dts | 2 +-
arch/arm/boot/dts/microchip/at91sam9263ek.dts | 2 +-
arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi | 2 +-
arch/arm/boot/dts/microchip/sama5d34ek.dts | 2 +-
7 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
index 95ecb7d040a8..8ac85dac5a96 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
@@ -106,7 +106,7 @@ i2c0: i2c@f8028000 {
scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
- at24@50 {
+ eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <8>;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
index 200b20515ab1..e4ae60ef5f8a 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
@@ -231,7 +231,7 @@ i2c1: i2c@fc028000 {
scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
- at24@50 {
+ eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <8>;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
index 6680031387e8..4bab3f25b855 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
@@ -411,7 +411,7 @@ i2c1: i2c@fc028000 {
scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
- at24@54 {
+ eeprom@54 {
compatible = "atmel,24c02";
reg = <0x54>;
pagesize = <16>;
diff --git a/arch/arm/boot/dts/microchip/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
index 720c15472c4a..6bd60dce8378 100644
--- a/arch/arm/boot/dts/microchip/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
@@ -165,7 +165,7 @@ button-4 {
i2c-gpio-0 {
status = "okay";
- 24c512@50 {
+ eeprom@50 {
compatible = "atmel,24c512";
reg = <0x50>;
};
diff --git a/arch/arm/boot/dts/microchip/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
index d872d9652194..ecf4960c88fa 100644
--- a/arch/arm/boot/dts/microchip/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
@@ -253,7 +253,7 @@ button-right-click {
i2c-gpio-0 {
status = "okay";
- 24c512@50 {
+ eeprom@50 {
compatible = "atmel,24c512";
reg = <0x50>;
pagesize = <128>;
diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
index 565b99e79c52..4e7cfbbd4241 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
@@ -220,7 +220,7 @@ usb0: ohci@500000 {
i2c-gpio-0 {
status = "okay";
- 24c512@50 {
+ eeprom@50 {
compatible = "atmel,24c512";
reg = <0x50>;
vcc-supply = <®_3v3>;
diff --git a/arch/arm/boot/dts/microchip/sama5d34ek.dts b/arch/arm/boot/dts/microchip/sama5d34ek.dts
index bffd61397cb5..18943b873fff 100644
--- a/arch/arm/boot/dts/microchip/sama5d34ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d34ek.dts
@@ -36,7 +36,7 @@ i2c0: i2c@f0014000 {
i2c1: i2c@f0018000 {
status = "okay";
- 24c256@50 {
+ eeprom@50 {
compatible = "atmel,24c256";
reg = <0x50>;
pagesize = <64>;
--
2.34.1
next prev parent reply other threads:[~2024-08-14 12:29 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-14 12:26 [PATCH 0/5] Cosmetic Work for ARM/Microchip (AT91) Andrei Simion
2024-08-14 12:26 ` [PATCH 1/5] ARM: dts: microchip: Clean up spacing and indentation Andrei Simion
2024-08-14 13:20 ` Krzysztof Kozlowski
2024-08-14 13:32 ` Andrei.Simion
2024-08-14 13:57 ` Krzysztof Kozlowski
2024-08-14 14:20 ` Andrei.Simion
2024-08-14 12:26 ` Andrei Simion [this message]
2024-08-14 12:26 ` [PATCH 3/5] ARM: dts: microchip: Rename the pmic node Andrei Simion
2024-08-14 13:20 ` Krzysztof Kozlowski
2024-08-14 13:58 ` Krzysztof Kozlowski
2024-08-14 12:26 ` [PATCH 4/5] ARM: dts: microchip: Rename the usb node Andrei Simion
2024-08-14 13:22 ` Krzysztof Kozlowski
2024-09-05 13:51 ` Andrei.Simion
2024-09-05 13:55 ` Krzysztof Kozlowski
2024-08-14 12:26 ` [PATCH 5/5] ARM: dts: microchip: Rename LED sub nodes name Andrei Simion
2024-08-14 13:23 ` Krzysztof Kozlowski
2024-08-15 7:57 ` Alexander Dahl
2024-08-16 8:52 ` Andrei.Simion
2024-08-16 9:06 ` Alexander Dahl
2024-08-20 6:32 ` Andrei.Simion
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240814122633.198562-3-andrei.simion@microchip.com \
--to=andrei.simion@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=cristian.birsan@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=peda@axentia.se \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox