From: Andrei Simion <andrei.simion@microchip.com>
To: <claudiu.beznea@tuxon.dev>, <nicolas.ferre@microchip.com>,
<alexandre.belloni@bootlin.com>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>, <peda@axentia.se>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<cristian.birsan@microchip.com>,
Andrei Simion <andrei.simion@microchip.com>
Subject: [PATCH 3/5] ARM: dts: microchip: Rename the pmic node
Date: Wed, 14 Aug 2024 15:26:31 +0300 [thread overview]
Message-ID: <20240814122633.198562-4-andrei.simion@microchip.com> (raw)
In-Reply-To: <20240814122633.198562-1-andrei.simion@microchip.com>
Rename the pmic node according to the devicetree
specification.
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
---
Split the bloated patch into small patches on topics
based on comments
https://lore.kernel.org/linux-arm-kernel/89f51615-0dee-4ab0-ab72-e3c057fee1e7@tuxon.dev/
---
arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi | 2 +-
arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi | 2 +-
arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts | 2 +-
arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts | 2 +-
arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts | 2 +-
arch/arm/boot/dts/microchip/at91-sama7g5ek.dts | 2 +-
arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi | 2 +-
7 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi
index e5e21dff882f..a44d92305dbb 100644
--- a/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi
@@ -85,7 +85,7 @@ led-3 {
&i2c1 {
status = "okay";
- pmic: act8865@5b {
+ act8865: pmic@5b {
compatible = "active-semi,act8865";
reg = <0x5b>;
status = "okay";
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
index 4617805c7748..2114b2ad9a91 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
@@ -67,7 +67,7 @@ &i2c1 {
scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
- mcp16502@5b {
+ pmic@5b {
compatible = "microchip,mcp16502";
reg = <0x5b>;
status = "okay";
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
index 6b02b7bcfd49..412cc65472ff 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
@@ -141,7 +141,7 @@ &i2c0 {
i2c-sda-hold-time-ns = <350>;
status = "okay";
- mcp16502@5b {
+ pmic@5b {
compatible = "microchip,mcp16502";
reg = <0x5b>;
status = "okay";
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
index 54f5672285e4..e4648682c994 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
@@ -187,7 +187,7 @@ i2c6: i2c@600 {
i2c-digital-filter-width-ns = <35>;
status = "okay";
- mcp16502@5b {
+ pmic@5b {
compatible = "microchip,mcp16502";
reg = <0x5b>;
status = "okay";
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
index 820033727088..5662992cf213 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
@@ -87,7 +87,7 @@ i2c0: i2c@f0014000 {
i2c1: i2c@f0018000 {
status = "okay";
- pmic: act8865@5b {
+ act8865: pmic@5b {
compatible = "active-semi,act8865";
reg = <0x5b>;
status = "disabled";
diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
index 40f4480e298b..dd0370cd41b4 100644
--- a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
@@ -236,7 +236,7 @@ i2c1: i2c@600 {
i2c-digital-filter-width-ns = <35>;
status = "okay";
- mcp16502@5b {
+ pmic@5b {
compatible = "microchip,mcp16502";
reg = <0x5b>;
status = "okay";
diff --git a/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi
index 830a0954ba1b..362806afef44 100644
--- a/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi
@@ -79,7 +79,7 @@ ethernet-phy@7 {
};
i2c1: i2c@f0018000 {
- pmic: act8865@5b {
+ act8865: pmic@5b {
compatible = "active-semi,act8865";
reg = <0x5b>;
status = "disabled";
--
2.34.1
next prev parent reply other threads:[~2024-08-14 12:29 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-14 12:26 [PATCH 0/5] Cosmetic Work for ARM/Microchip (AT91) Andrei Simion
2024-08-14 12:26 ` [PATCH 1/5] ARM: dts: microchip: Clean up spacing and indentation Andrei Simion
2024-08-14 13:20 ` Krzysztof Kozlowski
2024-08-14 13:32 ` Andrei.Simion
2024-08-14 13:57 ` Krzysztof Kozlowski
2024-08-14 14:20 ` Andrei.Simion
2024-08-14 12:26 ` [PATCH 2/5] ARM: dts: microchip: Rename the eeprom nodename Andrei Simion
2024-08-14 12:26 ` Andrei Simion [this message]
2024-08-14 13:20 ` [PATCH 3/5] ARM: dts: microchip: Rename the pmic node Krzysztof Kozlowski
2024-08-14 13:58 ` Krzysztof Kozlowski
2024-08-14 12:26 ` [PATCH 4/5] ARM: dts: microchip: Rename the usb node Andrei Simion
2024-08-14 13:22 ` Krzysztof Kozlowski
2024-09-05 13:51 ` Andrei.Simion
2024-09-05 13:55 ` Krzysztof Kozlowski
2024-08-14 12:26 ` [PATCH 5/5] ARM: dts: microchip: Rename LED sub nodes name Andrei Simion
2024-08-14 13:23 ` Krzysztof Kozlowski
2024-08-15 7:57 ` Alexander Dahl
2024-08-16 8:52 ` Andrei.Simion
2024-08-16 9:06 ` Alexander Dahl
2024-08-20 6:32 ` Andrei.Simion
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240814122633.198562-4-andrei.simion@microchip.com \
--to=andrei.simion@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=cristian.birsan@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=peda@axentia.se \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox