public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Cc: Shiju Jose <shiju.jose@huawei.com>,
	"Michael S. Tsirkin" <mst@redhat.com>,
	Ani Sinha <anisinha@redhat.com>,
	Dongjiu Geng <gengdongjiu1@gmail.com>,
	Eric Blake <eblake@redhat.com>,
	Igor Mammedov <imammedo@redhat.com>,
	Markus Armbruster <armbru@redhat.com>,
	Michael Roth <michael.roth@amd.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Peter Maydell <peter.maydell@linaro.org>,
	<linux-kernel@vger.kernel.org>, <qemu-arm@nongnu.org>,
	<qemu-devel@nongnu.org>
Subject: Re: [PATCH v7 04/10] qapi/acpi-hest: add an interface to do generic CPER error injection
Date: Wed, 14 Aug 2024 19:15:06 +0200	[thread overview]
Message-ID: <20240814191506.21894ac7@foz.lan> (raw)
In-Reply-To: <20240814145322.00002dcb@Huawei.com>

Em Wed, 14 Aug 2024 14:53:22 +0100
Jonathan Cameron <Jonathan.Cameron@Huawei.com> escreveu:

> On Wed, 14 Aug 2024 01:23:26 +0200
> Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> 
> > Creates a QMP command to be used for generic ACPI APEI hardware error
> > injection (HEST) via GHESv2.
> > 
> > The actual GHES code will be added at the followup patch.
> > 
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> > Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
> > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>  
> 
> A few trivial things from a quick glance at this
> (to remind myself of how this fits together).
> 
> > diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig
> > index e07d3204eb36..73ffbb82c150 100644
> > --- a/hw/acpi/Kconfig
> > +++ b/hw/acpi/Kconfig
> > @@ -51,6 +51,11 @@ config ACPI_APEI
> >      bool
> >      depends on ACPI
> >  
> > +config GHES_CPER
> > +    bool
> > +    depends on ACPI_APEI
> > +    default y
> > +
> >  config ACPI_PCI
> >      bool
> >      depends on ACPI && PCI
> > diff --git a/hw/acpi/ghes_cper.c b/hw/acpi/ghes_cper.c
> > new file mode 100644
> > index 000000000000..92ca84d738de
> > --- /dev/null
> > +++ b/hw/acpi/ghes_cper.c
> > @@ -0,0 +1,33 @@  
> 
> > +#include "qapi/qapi-commands-acpi-hest.h"
> > +#include "hw/acpi/ghes.h"
> > +
> > +void qmp_ghes_cper(const char *qmp_cper,
> > +                   Error **errp)  

Heh, with all code changes, this is not a lot simpler than before ;-)

I'll address it on a next spin.

> That's a very short line wrap.
> 
> > +{
> > +
> > +    uint8_t *cper;
> > +    size_t  len;
> > +
> > +    cper = qbase64_decode(qmp_cper, -1, &len, errp);
> > +    if (!cper) {
> > +        error_setg(errp, "missing GHES CPER payload");
> > +        return;
> > +    }
> > +
> > +    /* TODO: call a function at ghes */
> > +}  
> 
> > diff --git a/include/hw/acpi/ghes.h b/include/hw/acpi/ghes.h
> > index 419a97d5cbd9..99d12d69c864 100644
> > --- a/include/hw/acpi/ghes.h
> > +++ b/include/hw/acpi/ghes.h
> > @@ -23,6 +23,7 @@
> >  #define ACPI_GHES_H
> >  
> >  #include "hw/acpi/bios-linker-loader.h"
> > +#include "qapi/error.h"  
> Odd to have an include added with no other changes in file?
> Wrong patch maybe?  Or should it be included by a c file instead?

Removing it would cause a compilation breakage. It might be moved
to a c file, but patch 5/10 requires it at ghes.h, as it adds
this to ghes.h:

	void ghes_record_cper_errors(uint8_t *cper, size_t len,
        	                     enum AcpiGhesNotifyType notify,Error **errp);

So, instead of poking around moving this to/from .c/.h, I opted to
place it on its final place.

> >  #include "qemu/notify.h"
> >  
> >  extern NotifierList acpi_generic_error_notifiers;
> > diff --git a/qapi/acpi-hest.json b/qapi/acpi-hest.json  
> 
> 



Thanks,
Mauro

  reply	other threads:[~2024-08-14 17:15 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1723591201.git.mchehab+huawei@kernel.org>
2024-08-13 23:23 ` [PATCH v7 01/10] acpi/generic_event_device: add an APEI error device Mauro Carvalho Chehab
2024-08-14  7:38   ` Michael S. Tsirkin
2024-08-14 12:33   ` Jonathan Cameron
2024-08-16  5:53     ` Mauro Carvalho Chehab
2024-08-16 10:42       ` Jonathan Cameron
2024-08-13 23:23 ` [PATCH v7 02/10] arm/virt: Wire up a GED error device for ACPI / GHES Mauro Carvalho Chehab
2024-08-14 12:35   ` Jonathan Cameron
2024-08-13 23:23 ` [PATCH v7 03/10] acpi/ghes: Add support for GED error device Mauro Carvalho Chehab
2024-08-14 13:50   ` Jonathan Cameron
2024-08-13 23:23 ` [PATCH v7 04/10] qapi/acpi-hest: add an interface to do generic CPER error injection Mauro Carvalho Chehab
2024-08-14 13:53   ` Jonathan Cameron
2024-08-14 17:15     ` Mauro Carvalho Chehab [this message]
2024-08-13 23:23 ` [PATCH v7 05/10] acpi/ghes: rework the logic to handle HEST source ID Mauro Carvalho Chehab
2024-08-16  5:44   ` Mauro Carvalho Chehab
2024-08-13 23:23 ` [PATCH v7 06/10] acpi/ghes: add support for generic error injection via QAPI Mauro Carvalho Chehab
2024-08-13 23:23 ` [PATCH v7 07/10] docs: acpi_hest_ghes: fix documentation for CPER size Mauro Carvalho Chehab
2024-08-13 23:23 ` [PATCH v7 08/10] scripts/ghes_inject: add a script to generate GHES error inject Mauro Carvalho Chehab
2024-08-13 23:23 ` [PATCH v7 09/10] target/arm: add an experimental mpidr arm cpu property object Mauro Carvalho Chehab
2024-08-13 23:23 ` [PATCH v7 10/10] scripts/arm_processor_error.py: retrieve mpidr if not filled Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240814191506.21894ac7@foz.lan \
    --to=mchehab+huawei@kernel.org \
    --cc=Jonathan.Cameron@Huawei.com \
    --cc=anisinha@redhat.com \
    --cc=armbru@redhat.com \
    --cc=eblake@redhat.com \
    --cc=gengdongjiu1@gmail.com \
    --cc=imammedo@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.roth@amd.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=shiju.jose@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox