From: Mario Limonciello <superm1@kernel.org>
To: Yazen Ghannam <yazen.ghannam@amd.com>,
Clemens Ladisch <clemens@ladisch.de>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
Mario Limonciello <mario.limonciello@amd.com>
Subject: [PATCH] hwmon: (k10temp): Use cpu_feature_enabled() for detecting zen
Date: Tue, 20 Aug 2024 00:35:57 -0500 [thread overview]
Message-ID: <20240820053558.1052853-1-superm1@kernel.org> (raw)
From: Mario Limonciello <mario.limonciello@amd.com>
This removes some boilerplate from the code and will allow adding
future CPUs by just device IDs.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
drivers/hwmon/k10temp.c | 26 ++++++++++----------------
1 file changed, 10 insertions(+), 16 deletions(-)
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 543526bac0425..85a7632f3b50a 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -438,16 +438,21 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
data->disp_negative = true;
}
- if (boot_cpu_data.x86 == 0x15 &&
+ data->is_zen = cpu_feature_enabled(X86_FEATURE_ZEN);
+ if (data->is_zen) {
+ data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK;
+ data->read_tempreg = read_tempreg_nb_zen;
+ } else if (boot_cpu_data.x86 == 0x15 &&
((boot_cpu_data.x86_model & 0xf0) == 0x60 ||
(boot_cpu_data.x86_model & 0xf0) == 0x70)) {
data->read_htcreg = read_htcreg_nb_f15;
data->read_tempreg = read_tempreg_nb_f15;
- } else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
- data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK;
- data->read_tempreg = read_tempreg_nb_zen;
- data->is_zen = true;
+ } else {
+ data->read_htcreg = read_htcreg_pci;
+ data->read_tempreg = read_tempreg_pci;
+ }
+ if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
switch (boot_cpu_data.x86_model) {
case 0x1: /* Zen */
case 0x8: /* Zen+ */
@@ -469,10 +474,6 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
break;
}
} else if (boot_cpu_data.x86 == 0x19) {
- data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK;
- data->read_tempreg = read_tempreg_nb_zen;
- data->is_zen = true;
-
switch (boot_cpu_data.x86_model) {
case 0x0 ... 0x1: /* Zen3 SP3/TR */
case 0x8: /* Zen3 TR Chagall */
@@ -496,13 +497,6 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
k10temp_get_ccd_support(data, 12);
break;
}
- } else if (boot_cpu_data.x86 == 0x1a) {
- data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK;
- data->read_tempreg = read_tempreg_nb_zen;
- data->is_zen = true;
- } else {
- data->read_htcreg = read_htcreg_pci;
- data->read_tempreg = read_tempreg_pci;
}
for (i = 0; i < ARRAY_SIZE(tctl_offset_table); i++) {
--
2.43.0
next reply other threads:[~2024-08-20 5:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-20 5:35 Mario Limonciello [this message]
2024-08-21 13:09 ` [PATCH] hwmon: (k10temp): Use cpu_feature_enabled() for detecting zen Yazen Ghannam
2024-08-21 14:34 ` Mario Limonciello
2024-08-21 23:29 ` Guenter Roeck
2024-08-22 14:19 ` Yazen Ghannam
2024-08-27 3:57 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240820053558.1052853-1-superm1@kernel.org \
--to=superm1@kernel.org \
--cc=clemens@ladisch.de \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mario.limonciello@amd.com \
--cc=yazen.ghannam@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox