Re: [PATCH v4] PCI: qcom: Disable mirroring of DBI and iATU register space in BAR region

["Krzysztof Wilczyński" <kw@linux.com>]

Hello,

> PARF hardware block which is a wrapper on top of DWC PCIe controller
> mirrors the DBI and ATU register space. It uses PARF_SLV_ADDR_SPACE_SIZE
> register to get the size of the memory block to be mirrored and uses
> PARF_DBI_BASE_ADDR, PARF_ATU_BASE_ADDR registers to determine the base
> address of DBI and ATU space inside the memory block that is being
> mirrored.
> 
> When a memory region which is located above the SLV_ADDR_SPACE_SIZE
> boundary is used for BAR region then there could be an overlap of DBI and
> ATU address space that is getting mirrored and the BAR region. This
> results in DBI and ATU address space contents getting updated when a PCIe
> function driver tries updating the BAR/MMIO memory region. Reference
> memory map of the PCIe memory region with DBI and ATU address space
> overlapping BAR region is as below.
> 
>                         |---------------|
>                         |               |
>                         |               |
>         ------- --------|---------------|
>            |       |    |---------------|
>            |       |    |       DBI     |
>            |       |    |---------------|---->DBI_BASE_ADDR
>            |       |    |               |
>            |       |    |               |
>            |    PCIe    |               |---->2*SLV_ADDR_SPACE_SIZE
>            |    BAR/MMIO|---------------|
>            |    Region  |       ATU     |
>            |       |    |---------------|---->ATU_BASE_ADDR
>            |       |    |               |
>         PCIe       |    |---------------|
>         Memory     |    |       DBI     |
>         Region     |    |---------------|---->DBI_BASE_ADDR
>            |       |    |               |
>            |    --------|               |
>            |            |               |---->SLV_ADDR_SPACE_SIZE
>            |            |---------------|
>            |            |       ATU     |
>            |            |---------------|---->ATU_BASE_ADDR
>            |            |               |
>            |            |---------------|
>            |            |       DBI     |
>            |            |---------------|---->DBI_BASE_ADDR
>            |            |               |
>            |            |               |
>         ----------------|---------------|
>                         |               |
>                         |               |
>                         |               |
>                         |---------------|
> 
> Currently memory region beyond the SLV_ADDR_SPACE_SIZE boundary is not
> used for BAR region which is why the above mentioned issue is not
> encountered. This issue is discovered as part of internal testing when we
> tried moving the BAR region beyond the SLV_ADDR_SPACE_SIZE boundary. Hence
> we are trying to fix this.
> 
> As PARF hardware block mirrors DBI and ATU register space after every
> PARF_SLV_ADDR_SPACE_SIZE (default 0x1000000) boundary multiple, program
> maximum possible size to this register by writing 0x80000000 to it(it
> considers only powers of 2 as values) to avoid mirroring DBI and ATU to
> BAR/MMIO region. Write the physical base address of DBI and ATU register
> blocks to PARF_DBI_BASE_ADDR (default 0x0) and PARF_ATU_BASE_ADDR (default
> 0x1000) respectively to make sure DBI and ATU blocks are at expected
> memory locations.
> 
> The register offsets PARF_DBI_BASE_ADDR_V2, PARF_SLV_ADDR_SPACE_SIZE_V2
> and PARF_ATU_BASE_ADDR are applicable for platforms that use Qcom IP
> rev 1.9.0, 2.7.0 and 2.9.0. PARF_DBI_BASE_ADDR_V2 and
> PARF_SLV_ADDR_SPACE_SIZE_V2 are applicable for Qcom IP rev 2.3.3.
> PARF_DBI_BASE_ADDR and PARF_SLV_ADDR_SPACE_SIZE are applicable for Qcom
> IP rev 1.0.0, 2.3.2 and 2.4.0. Update init()/post_init() functions of the
> respective Qcom IP versions to program applicable PARF_DBI_BASE_ADDR,
> PARF_SLV_ADDR_SPACE_SIZE and PARF_ATU_BASE_ADDR register offsets. Update
> the SLV_ADDR_SPACE_SZ macro to 0x80000000 to set highest bit in
> PARF_SLV_ADDR_SPACE_SIZE register.
> 
> Cache DBI and iATU physical addresses in 'struct dw_pcie' so that
> pcie_qcom.c driver can program these addresses in the PARF_DBI_BASE_ADDR
> and PARF_ATU_BASE_ADDR registers.

Applied to controller/qcom, thank you!

[1/1] PCI: qcom: Disable mirroring of DBI and iATU register space in BAR region
      https://git.kernel.org/pci/pci/c/10ba0854c5e6

	Krzysztof