[PATCH 2/3] net: xilinx: axienet: Enable NETIF_F_HW_CSUM for partial tx checksumming

[Sean Anderson <sean.anderson@linux.dev>]

Partial tx chechsumming is completely generic and does not depend on the
L3/L4 protocol. Signal this to the net subsystem by enabling the
more-generic offload feature (instead of restricting ourselves to
TCP/UDP over IPv4 checksumming only like is necessary with full
checksumming).

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---

 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 60ec430f3eb0..74fade5a95c2 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -2632,8 +2632,8 @@ static int axienet_probe(struct platform_device *pdev)
 		switch (value) {
 		case 1:
 			lp->features |= XAE_FEATURE_PARTIAL_TX_CSUM;
-			/* Can checksum TCP/UDP over IPv4. */
-			ndev->features |= NETIF_F_IP_CSUM;
+			/* Can checksum any contiguous range */
+			ndev->features |= NETIF_F_HW_CSUM;
 			break;
 		case 2:
 			lp->features |= XAE_FEATURE_FULL_TX_CSUM;
-- 
2.35.1.1320.gc452695387.dirty