Re: [PATCH] usb: dwc2: drd: fix clock gating on USB role switch

[Tomas Marek <tomas.marek@elrest.cz>]

Hi Sergey,

thank you for your review.

On Tue, Sep 03, 2024 at 04:20:26PM +0300, Sergey Shtylyov wrote:
> On 9/3/24 12:41 PM, Tomas Marek wrote:
> 
> > The dwc2_handle_usb_suspend_intr() function disables gadget clocks in USB
> > peripheral mode when no other power-down mode is available (introduced by
> > commit 0112b7ce68ea ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.")).
> > However, the dwc2_drd_role_sw_set() USB role update handler attempts to
> > read DWC2 registers if the USB role has changed while the USB is in suspend
> > mode (when the clocks are gated). This causes the system to hang.
> > 
> > Release gadget clocks before handling the USB role update.
> > 
> > Fixes: 0112b7ce68ea ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.")
> > 
> > Signed-off-by: Tomas Marek <tomas.marek@elrest.cz>
> > ---
> >  drivers/usb/dwc2/drd.c | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> > 
> > diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c
> > index a8605b02115b..ccb33cd1f04b 100644
> > --- a/drivers/usb/dwc2/drd.c
> > +++ b/drivers/usb/dwc2/drd.c
> > @@ -127,6 +127,18 @@ static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
> >  			role = USB_ROLE_DEVICE;
> >  	}
> >  
> > +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
> > +	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
> > +	if (dwc2_is_device_mode(hsotg)) {
> 
>    Why not avoid #ifdef by doing e.g.:
> 
> 	if ((IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
> 	     IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) &&
> 	     dwc2_is_device_mode(hsotg)) {
> 
> > +		if (hsotg->lx_state == DWC2_L2) {
> > +			if (hsotg->params.power_down ==
> > +			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended &&
> > +			    !hsotg->params.no_clock_gating)
> 
>    Well, these *if*s are mergeable too... :-)
> 

OK, why not. In the end all conditions could be merged into one if statement like:

	if ((IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) ||
	     IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)) &&
	     dwc2_is_device_mode(hsotg) &&
	     hsotg->lx_state == DWC2_L2 &&
	     hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE &&
	     hsotg->bus_suspended &&
	     !hsotg->params.no_clock_gating)
		dwc2_gadget_exit_clock_gating(hsotg, 0);

I’ll submit a new patch version with this modification.

Best regards

Tomas

> > +				dwc2_gadget_exit_clock_gating(hsotg, 0);
> > +		}
> > +	}
> > +#endif
> > +
> [...]
> 
> MBR, Sergey