From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: patrick@stwcx.xyz, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>,
Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 2/2] ARM: dts: aspeed: yosemite4: Add gpio pca9506 for CPLD IOE
Date: Tue, 10 Sep 2024 13:47:51 +0800 [thread overview]
Message-ID: <20240910054751.2943217-3-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20240910054751.2943217-1-Delphine_CC_Chiu@wiwynn.com>
From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
We use CPLD to emulate gpio pca9506 I/O expander on each server
boards.
Therefore, add pca9506 to probe driver for the CPLD I/O expander.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 252 ++++++++++++++++++
1 file changed, 252 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 08d32e42286e..9d2efb5f2f67 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -129,6 +129,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -147,6 +175,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -165,6 +221,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -183,6 +267,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -201,6 +313,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -219,6 +359,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -237,6 +405,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -255,6 +451,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -385,6 +609,34 @@ ipmb@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
i2c-protocol;
};
+
+ gpio@20 {
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
&i2c14 {
--
2.25.1
next prev parent reply other threads:[~2024-09-10 5:48 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-10 5:47 [PATCH v1 0/2] Yosemite4: Add devices on I2C buses to server boards Delphine CC Chiu
2024-09-10 5:47 ` [PATCH v1 1/2] ARM: dts: aspeed: yosemite4: Revise to use adm1281 on Medusa board Delphine CC Chiu
2024-09-10 5:47 ` Delphine CC Chiu [this message]
2024-09-12 2:10 ` [PATCH v1 2/2] ARM: dts: aspeed: yosemite4: Add gpio pca9506 for CPLD IOE Andrew Jeffery
2024-09-13 2:08 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-13 3:26 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-16 3:05 ` Andrew Jeffery
2024-09-18 1:53 ` Ricky CX Wu/WYHQ/Wiwynn
2024-09-18 1:55 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-19 1:59 ` [PATCH v1 0/2] Yosemite4: Add devices on I2C buses to server boards Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240910054751.2943217-3-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patrick@stwcx.xyz \
--cc=ricky.cx.wu.wiwynn@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox