Re: [PATCH v2 06/11] media: i2c: ov5645: Drop `power_lock` mutex

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

On Tue, Sep 10, 2024 at 06:06:05PM +0100, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Drop mutex while applying controls and just rely on
> pm_runtime_get_if_in_use() call.

Here too the commit message should explain why the mutex can be dropped.
Given that it is only used in .s_ctrl(), and the control framework
serializes calls to the function, the mutex is not needed.

> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

> ---
>  drivers/media/i2c/ov5645.c | 12 +-----------
>  1 file changed, 1 insertion(+), 11 deletions(-)
> 
> diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
> index 45687d004004..25c60afcc0ec 100644
> --- a/drivers/media/i2c/ov5645.c
> +++ b/drivers/media/i2c/ov5645.c
> @@ -106,8 +106,6 @@ struct ov5645 {
>  	u8 timing_tc_reg20;
>  	u8 timing_tc_reg21;
>  
> -	struct mutex power_lock; /* lock to protect power state */
> -
>  	struct gpio_desc *enable_gpio;
>  	struct gpio_desc *rst_gpio;
>  };
> @@ -782,11 +780,8 @@ static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl)
>  					     struct ov5645, ctrls);
>  	int ret;
>  
> -	mutex_lock(&ov5645->power_lock);
> -	if (!pm_runtime_get_if_in_use(ov5645->dev)) {
> -		mutex_unlock(&ov5645->power_lock);
> +	if (!pm_runtime_get_if_in_use(ov5645->dev))
>  		return 0;
> -	}
>  
>  	switch (ctrl->id) {
>  	case V4L2_CID_SATURATION:
> @@ -817,7 +812,6 @@ static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl)
>  
>  	pm_runtime_mark_last_busy(ov5645->dev);
>  	pm_runtime_put_autosuspend(ov5645->dev);
> -	mutex_unlock(&ov5645->power_lock);
>  
>  	return ret;
>  }
> @@ -1124,8 +1118,6 @@ static int ov5645_probe(struct i2c_client *client)
>  	if (IS_ERR(ov5645->rst_gpio))
>  		return dev_err_probe(dev, PTR_ERR(ov5645->rst_gpio), "cannot get reset gpio\n");
>  
> -	mutex_init(&ov5645->power_lock);
> -
>  	v4l2_ctrl_handler_init(&ov5645->ctrls, 9);
>  	v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops,
>  			  V4L2_CID_SATURATION, -4, 4, 1, 0);
> @@ -1245,7 +1237,6 @@ static int ov5645_probe(struct i2c_client *client)
>  	media_entity_cleanup(&ov5645->sd.entity);
>  free_ctrl:
>  	v4l2_ctrl_handler_free(&ov5645->ctrls);
> -	mutex_destroy(&ov5645->power_lock);
>  
>  	return ret;
>  }
> @@ -1262,7 +1253,6 @@ static void ov5645_remove(struct i2c_client *client)
>  	if (!pm_runtime_status_suspended(ov5645->dev))
>  		ov5645_set_power_off(ov5645->dev);
>  	pm_runtime_set_suspended(ov5645->dev);
> -	mutex_destroy(&ov5645->power_lock);
>  }
>  
>  static const struct i2c_device_id ov5645_id[] = {

-- 
Regards,

Laurent Pinchart