[PATCH net-next] net: macb: Adding support for Jumbo Frames up to 10240 Bytes in SAMA5D2

[Aleksander Jan Bajkowski <olek2@wp.pl>]

As per the SAMA5D2 device specification it supports Jumbo frames.
But the suggested flag and length of bytes it supports was not updated
in this driver config_structure.
The maximum jumbo frames the device supports:
10240 bytes as per the device spec.

While changing the MTU value greater than 1500, it threw error:
sudo ifconfig eth1 mtu 9000
SIOCSIFMTU: Invalid argument

Add this support to driver so that it works as expected and designed.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---
 drivers/net/ethernet/cadence/macb_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index f06babec04a0..9fda16557509 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -4841,10 +4841,11 @@ static const struct macb_config pc302gem_config = {
 };
 
 static const struct macb_config sama5d2_config = {
-	.caps = MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII,
+	.caps = MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII | MACB_CAPS_JUMBO,
 	.dma_burst_length = 16,
 	.clk_init = macb_clk_init,
 	.init = macb_init,
+	.jumbo_max_len = 10240,
 	.usrio = &macb_default_usrio,
 };
 
-- 
2.39.5