[PATCH AUTOSEL 5.10 01/26] bpf: Check percpu map value size first

[PATCH AUTOSEL 5.10 01/26] bpf: Check percpu map value size first

[Sasha Levin]

From: Tao Chen <chen.dylane@gmail.com>

[ Upstream commit 1d244784be6b01162b732a5a7d637dfc024c3203 ]

Percpu map is often used, but the map value size limit often ignored,
like issue: https://github.com/iovisor/bcc/issues/2519. Actually,
percpu map value size is bound by PCPU_MIN_UNIT_SIZE, so we
can check the value size whether it exceeds PCPU_MIN_UNIT_SIZE first,
like percpu map of local_storage. Maybe the error message seems clearer
compared with "cannot allocate memory".

Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240910144111.1464912-2-chen.dylane@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/arraymap.c | 3 +++
 kernel/bpf/hashtab.c  | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/kernel/bpf/arraymap.c b/kernel/bpf/arraymap.c
index 5102338129d5f..3d92e42c3895a 100644
--- a/kernel/bpf/arraymap.c
+++ b/kernel/bpf/arraymap.c
@@ -74,6 +74,9 @@ int array_map_alloc_check(union bpf_attr *attr)
 		 * access the elements.
 		 */
 		return -E2BIG;
+	/* percpu map value size is bound by PCPU_MIN_UNIT_SIZE */
+	if (percpu && round_up(attr->value_size, 8) > PCPU_MIN_UNIT_SIZE)
+		return -E2BIG;
 
 	return 0;
 }
diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c
index 72bc5f5752543..4c7cab79d90e5 100644
--- a/kernel/bpf/hashtab.c
+++ b/kernel/bpf/hashtab.c
@@ -404,6 +404,9 @@ static int htab_map_alloc_check(union bpf_attr *attr)
 		 * kmalloc-able later in htab_map_update_elem()
 		 */
 		return -E2BIG;
+	/* percpu map value size is bound by PCPU_MIN_UNIT_SIZE */
+	if (percpu && round_up(attr->value_size, 8) > PCPU_MIN_UNIT_SIZE)
+		return -E2BIG;
 
 	return 0;
 }
-- 
2.43.0

[PATCH AUTOSEL 5.10 02/26] s390/boot: Compile all files with the same march flag

[Sasha Levin]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit fccb175bc89a0d37e3ff513bb6bf1f73b3a48950 ]

Only a couple of files of the decompressor are compiled with the
minimum architecture level. This is problematic for potential function
calls between compile units, especially if a target function is within
a compile until compiled for a higher architecture level, since that
may lead to an unexpected operation exception.

Therefore compile all files of the decompressor for the same (minimum)
architecture level.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/boot/Makefile | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/arch/s390/boot/Makefile b/arch/s390/boot/Makefile
index 41a64b8dce252..6294ddc2ff891 100644
--- a/arch/s390/boot/Makefile
+++ b/arch/s390/boot/Makefile
@@ -8,11 +8,8 @@ GCOV_PROFILE := n
 UBSAN_SANITIZE := n
 KASAN_SANITIZE := n
 
-KBUILD_AFLAGS := $(KBUILD_AFLAGS_DECOMPRESSOR)
-KBUILD_CFLAGS := $(KBUILD_CFLAGS_DECOMPRESSOR)
-
 #
-# Use minimum architecture for als.c to be able to print an error
+# Use minimum architecture level so it is possible to print an error
 # message if the kernel is started on a machine which is too old
 #
 ifndef CONFIG_CC_IS_CLANG
@@ -21,16 +18,10 @@ else
 CC_FLAGS_MARCH_MINIMUM := -march=z10
 endif
 
-ifneq ($(CC_FLAGS_MARCH),$(CC_FLAGS_MARCH_MINIMUM))
-AFLAGS_REMOVE_head.o		+= $(CC_FLAGS_MARCH)
-AFLAGS_head.o			+= $(CC_FLAGS_MARCH_MINIMUM)
-AFLAGS_REMOVE_mem.o		+= $(CC_FLAGS_MARCH)
-AFLAGS_mem.o			+= $(CC_FLAGS_MARCH_MINIMUM)
-CFLAGS_REMOVE_als.o		+= $(CC_FLAGS_MARCH)
-CFLAGS_als.o			+= $(CC_FLAGS_MARCH_MINIMUM)
-CFLAGS_REMOVE_sclp_early_core.o	+= $(CC_FLAGS_MARCH)
-CFLAGS_sclp_early_core.o	+= $(CC_FLAGS_MARCH_MINIMUM)
-endif
+KBUILD_AFLAGS := $(filter-out $(CC_FLAGS_MARCH),$(KBUILD_AFLAGS_DECOMPRESSOR))
+KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_MARCH),$(KBUILD_CFLAGS_DECOMPRESSOR))
+KBUILD_AFLAGS += $(CC_FLAGS_MARCH_MINIMUM)
+KBUILD_CFLAGS += $(CC_FLAGS_MARCH_MINIMUM)
 
 CFLAGS_sclp_early_core.o += -I$(srctree)/drivers/s390/char
 
-- 
2.43.0

[PATCH AUTOSEL 5.10 03/26] s390/facility: Disable compile time optimization for decompressor code

[Sasha Levin]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit 0147addc4fb72a39448b8873d8acdf3a0f29aa65 ]

Disable compile time optimizations of test_facility() for the
decompressor. The decompressor should not contain any optimized code
depending on the architecture level set the kernel image is compiled
for to avoid unexpected operation exceptions.

Add a __DECOMPRESSOR check to test_facility() to enforce that
facilities are always checked during runtime for the decompressor.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/facility.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/s390/include/asm/facility.h b/arch/s390/include/asm/facility.h
index 68c476b20b57e..c7031d9ada293 100644
--- a/arch/s390/include/asm/facility.h
+++ b/arch/s390/include/asm/facility.h
@@ -53,8 +53,10 @@ static inline int test_facility(unsigned long nr)
 	unsigned long facilities_als[] = { FACILITIES_ALS };
 
 	if (__builtin_constant_p(nr) && nr < sizeof(facilities_als) * 8) {
-		if (__test_facility(nr, &facilities_als))
-			return 1;
+		if (__test_facility(nr, &facilities_als)) {
+			if (!__is_defined(__DECOMPRESSOR))
+				return 1;
+		}
 	}
 	return __test_facility(nr, &S390_lowcore.stfle_fac_list);
 }
-- 
2.43.0

[PATCH AUTOSEL 5.10 04/26] s390/mm: Add cond_resched() to cmm_alloc/free_pages()

[Sasha Levin]

From: Gerald Schaefer <gerald.schaefer@linux.ibm.com>

[ Upstream commit 131b8db78558120f58c5dc745ea9655f6b854162 ]

Adding/removing large amount of pages at once to/from the CMM balloon
can result in rcu_sched stalls or workqueue lockups, because of busy
looping w/o cond_resched().

Prevent this by adding a cond_resched(). cmm_free_pages() holds a
spin_lock while looping, so it cannot be added directly to the existing
loop. Instead, introduce a wrapper function that operates on maximum 256
pages at once, and add it there.

Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/mm/cmm.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index 1141c8d5c0d03..9b4304fa37bfc 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -95,11 +95,12 @@ static long cmm_alloc_pages(long nr, long *counter,
 		(*counter)++;
 		spin_unlock(&cmm_lock);
 		nr--;
+		cond_resched();
 	}
 	return nr;
 }
 
-static long cmm_free_pages(long nr, long *counter, struct cmm_page_array **list)
+static long __cmm_free_pages(long nr, long *counter, struct cmm_page_array **list)
 {
 	struct cmm_page_array *pa;
 	unsigned long addr;
@@ -123,6 +124,21 @@ static long cmm_free_pages(long nr, long *counter, struct cmm_page_array **list)
 	return nr;
 }
 
+static long cmm_free_pages(long nr, long *counter, struct cmm_page_array **list)
+{
+	long inc = 0;
+
+	while (nr) {
+		inc = min(256L, nr);
+		nr -= inc;
+		inc = __cmm_free_pages(inc, counter, list);
+		if (inc)
+			break;
+		cond_resched();
+	}
+	return nr + inc;
+}
+
 static int cmm_oom_notify(struct notifier_block *self,
 			  unsigned long dummy, void *parm)
 {
-- 
2.43.0

[PATCH AUTOSEL 5.10 05/26] ext4: fix i_data_sem unlock order in ext4_ind_migrate()

[Sasha Levin]

From: Artem Sadovnikov <ancowi69@gmail.com>

[ Upstream commit cc749e61c011c255d81b192a822db650c68b313f ]

Fuzzing reports a possible deadlock in jbd2_log_wait_commit.

This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require
synchronous updates because the file descriptor is opened with O_SYNC.
This can lead to the jbd2_journal_stop() function calling
jbd2_might_wait_for_commit(), potentially causing a deadlock if the
EXT4_IOC_MIGRATE call races with a write(2) system call.

This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this
case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the
jbd2_journal_stop function while i_data_sem is locked. This triggers
lockdep because the jbd2_journal_start function might also lock the same
jbd2_handle simultaneously.

Found by Linux Verification Center (linuxtesting.org) with syzkaller.

Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Co-developed-by: Mikhail Ukhin <mish.uxin2012@yandex.ru>
Signed-off-by: Mikhail Ukhin <mish.uxin2012@yandex.ru>
Signed-off-by: Artem Sadovnikov <ancowi69@gmail.com>
Rule: add
Link: https://lore.kernel.org/stable/20240404095000.5872-1-mish.uxin2012%40yandex.ru
Link: https://patch.msgid.link/20240829152210.2754-1-ancowi69@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/migrate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index b0ea646454ac8..59290356aa5b1 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -663,8 +663,8 @@ int ext4_ind_migrate(struct inode *inode)
 	if (unlikely(ret2 && !ret))
 		ret = ret2;
 errout:
-	ext4_journal_stop(handle);
 	up_write(&EXT4_I(inode)->i_data_sem);
+	ext4_journal_stop(handle);
 out_unlock:
 	percpu_up_write(&sbi->s_writepages_rwsem);
 	return ret;
-- 
2.43.0

[PATCH AUTOSEL 5.10 06/26] ext4: avoid use-after-free in ext4_ext_show_leaf()

[Sasha Levin]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 4e2524ba2ca5f54bdbb9e5153bea00421ef653f5 ]

In ext4_find_extent(), path may be freed by error or be reallocated, so
using a previously saved *ppath may have been freed and thus may trigger
use-after-free, as follows:

ext4_split_extent
  path = *ppath;
  ext4_split_extent_at(ppath)
  path = ext4_find_extent(ppath)
  ext4_split_extent_at(ppath)
    // ext4_find_extent fails to free path
    // but zeroout succeeds
  ext4_ext_show_leaf(inode, path)
    eh = path[depth].p_hdr
    // path use-after-free !!!

Similar to ext4_split_extent_at(), we use *ppath directly as an input to
ext4_ext_show_leaf(). Fix a spelling error by the way.

Same problem in ext4_ext_handle_unwritten_extents(). Since 'path' is only
used in ext4_ext_show_leaf(), remove 'path' and use *ppath directly.

This issue is triggered only when EXT_DEBUG is defined and therefore does
not affect functionality.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-5-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/extents.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index f5fa9d542d648..b92464c8f63b4 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -3283,7 +3283,7 @@ static int ext4_split_extent_at(handle_t *handle,
 }
 
 /*
- * ext4_split_extents() splits an extent and mark extent which is covered
+ * ext4_split_extent() splits an extent and mark extent which is covered
  * by @map as split_flags indicates
  *
  * It may result in splitting the extent into multiple extents (up to three)
@@ -3360,7 +3360,7 @@ static int ext4_split_extent(handle_t *handle,
 			goto out;
 	}
 
-	ext4_ext_show_leaf(inode, path);
+	ext4_ext_show_leaf(inode, *ppath);
 out:
 	return err ? err : allocated;
 }
@@ -3825,14 +3825,13 @@ ext4_ext_handle_unwritten_extents(handle_t *handle, struct inode *inode,
 			struct ext4_ext_path **ppath, int flags,
 			unsigned int allocated, ext4_fsblk_t newblock)
 {
-	struct ext4_ext_path __maybe_unused *path = *ppath;
 	int ret = 0;
 	int err = 0;
 
 	ext_debug(inode, "logical block %llu, max_blocks %u, flags 0x%x, allocated %u\n",
 		  (unsigned long long)map->m_lblk, map->m_len, flags,
 		  allocated);
-	ext4_ext_show_leaf(inode, path);
+	ext4_ext_show_leaf(inode, *ppath);
 
 	/*
 	 * When writing into unwritten space, we should not fail to
@@ -3929,7 +3928,7 @@ ext4_ext_handle_unwritten_extents(handle_t *handle, struct inode *inode,
 	if (allocated > map->m_len)
 		allocated = map->m_len;
 	map->m_len = allocated;
-	ext4_ext_show_leaf(inode, path);
+	ext4_ext_show_leaf(inode, *ppath);
 out2:
 	return err ? err : allocated;
 }
-- 
2.43.0

[PATCH AUTOSEL 5.10 07/26] ext4: ext4_search_dir should return a proper error

[Sasha Levin]

From: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>

[ Upstream commit cd69f8f9de280e331c9e6ff689ced0a688a9ce8f ]

ext4_search_dir currently returns -1 in case of a failure, while it returns
0 when the name is not found. In such failure cases, it should return an
error code instead.

This becomes even more important when ext4_find_inline_entry returns an
error code as well in the next commit.

-EFSCORRUPTED seems appropriate as such error code as these failures would
be caused by unexpected record lengths and is in line with other instances
of ext4_check_dir_entry failures.

In the case of ext4_dx_find_entry, the current use of ERR_BAD_DX_DIR was
left as is to reduce the risk of regressions.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20240821152324.3621860-2-cascardo@igalia.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/namei.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index bf312f94c3bf7..39630c8cb8d38 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1427,7 +1427,7 @@ static inline bool ext4_match(const struct inode *parent,
 }
 
 /*
- * Returns 0 if not found, -1 on failure, and 1 on success
+ * Returns 0 if not found, -EFSCORRUPTED on failure, and 1 on success
  */
 int ext4_search_dir(struct buffer_head *bh, char *search_buf, int buf_size,
 		    struct inode *dir, struct ext4_filename *fname,
@@ -1448,7 +1448,7 @@ int ext4_search_dir(struct buffer_head *bh, char *search_buf, int buf_size,
 			 * a full check */
 			if (ext4_check_dir_entry(dir, NULL, de, bh, search_buf,
 						 buf_size, offset))
-				return -1;
+				return -EFSCORRUPTED;
 			*res_dir = de;
 			return 1;
 		}
@@ -1456,7 +1456,7 @@ int ext4_search_dir(struct buffer_head *bh, char *search_buf, int buf_size,
 		de_len = ext4_rec_len_from_disk(de->rec_len,
 						dir->i_sb->s_blocksize);
 		if (de_len <= 0)
-			return -1;
+			return -EFSCORRUPTED;
 		offset += de_len;
 		de = (struct ext4_dir_entry_2 *) ((char *) de + de_len);
 	}
@@ -1608,8 +1608,10 @@ static struct buffer_head *__ext4_find_entry(struct inode *dir,
 			goto cleanup_and_exit;
 		} else {
 			brelse(bh);
-			if (i < 0)
+			if (i < 0) {
+				ret = ERR_PTR(i);
 				goto cleanup_and_exit;
+			}
 		}
 	next:
 		if (++block >= nblocks)
@@ -1703,7 +1705,7 @@ static struct buffer_head * ext4_dx_find_entry(struct inode *dir,
 		if (retval == 1)
 			goto success;
 		brelse(bh);
-		if (retval == -1) {
+		if (retval < 0) {
 			bh = ERR_PTR(ERR_BAD_DX_DIR);
 			goto errout;
 		}
-- 
2.43.0

[PATCH AUTOSEL 5.10 08/26] ext4: nested locking for xattr inode

[Sasha Levin]

From: Wojciech Gładysz <wojciech.gladysz@infogain.com>

[ Upstream commit d1bc560e9a9c78d0b2314692847fc8661e0aeb99 ]

Add nested locking with I_MUTEX_XATTR subclass to avoid lockdep warning
while handling xattr inode on file open syscall at ext4_xattr_inode_iget.

Backtrace
EXT4-fs (loop0): Ignoring removed oldalloc option
======================================================
WARNING: possible circular locking dependency detected
5.10.0-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor543/2794 is trying to acquire lock:
ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline]
ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425

but task is already holding lock:
ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&ei->i_data_sem/3){++++}-{3:3}:
       lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566
       down_write+0x93/0x180 kernel/locking/rwsem.c:1564
       ext4_update_i_disksize fs/ext4/ext4.h:3267 [inline]
       ext4_xattr_inode_write fs/ext4/xattr.c:1390 [inline]
       ext4_xattr_inode_lookup_create fs/ext4/xattr.c:1538 [inline]
       ext4_xattr_set_entry+0x331a/0x3d80 fs/ext4/xattr.c:1662
       ext4_xattr_ibody_set+0x124/0x390 fs/ext4/xattr.c:2228
       ext4_xattr_set_handle+0xc27/0x14e0 fs/ext4/xattr.c:2385
       ext4_xattr_set+0x219/0x390 fs/ext4/xattr.c:2498
       ext4_xattr_user_set+0xc9/0xf0 fs/ext4/xattr_user.c:40
       __vfs_setxattr+0x404/0x450 fs/xattr.c:177
       __vfs_setxattr_noperm+0x11d/0x4f0 fs/xattr.c:208
       __vfs_setxattr_locked+0x1f9/0x210 fs/xattr.c:266
       vfs_setxattr+0x112/0x2c0 fs/xattr.c:283
       setxattr+0x1db/0x3e0 fs/xattr.c:548
       path_setxattr+0x15a/0x240 fs/xattr.c:567
       __do_sys_setxattr fs/xattr.c:582 [inline]
       __se_sys_setxattr fs/xattr.c:578 [inline]
       __x64_sys_setxattr+0xc5/0xe0 fs/xattr.c:578
       do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62
       entry_SYSCALL_64_after_hwframe+0x61/0xcb

-> #0 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}:
       check_prev_add kernel/locking/lockdep.c:2988 [inline]
       check_prevs_add kernel/locking/lockdep.c:3113 [inline]
       validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729
       __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955
       lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566
       down_write+0x93/0x180 kernel/locking/rwsem.c:1564
       inode_lock include/linux/fs.h:782 [inline]
       ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425
       ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485
       ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline]
       ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline]
       ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774
       __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898
       ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline]
       __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018
       ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562
       notify_change+0xbb6/0xe60 fs/attr.c:435
       do_truncate+0x1de/0x2c0 fs/open.c:64
       handle_truncate fs/namei.c:2970 [inline]
       do_open fs/namei.c:3311 [inline]
       path_openat+0x29f3/0x3290 fs/namei.c:3425
       do_filp_open+0x20b/0x450 fs/namei.c:3452
       do_sys_openat2+0x124/0x460 fs/open.c:1207
       do_sys_open fs/open.c:1223 [inline]
       __do_sys_open fs/open.c:1231 [inline]
       __se_sys_open fs/open.c:1227 [inline]
       __x64_sys_open+0x221/0x270 fs/open.c:1227
       do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62
       entry_SYSCALL_64_after_hwframe+0x61/0xcb

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&ei->i_data_sem/3);
                               lock(&ea_inode->i_rwsem#7/1);
                               lock(&ei->i_data_sem/3);
  lock(&ea_inode->i_rwsem#7/1);

 *** DEADLOCK ***

5 locks held by syz-executor543/2794:
 #0: ffff888026fbc448 (sb_writers#4){.+.+}-{0:0}, at: mnt_want_write+0x4a/0x2a0 fs/namespace.c:365
 #1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline]
 #1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: do_truncate+0x1cf/0x2c0 fs/open.c:62
 #2: ffff8880215e3310 (&ei->i_mmap_sem){++++}-{3:3}, at: ext4_setattr+0xec4/0x19c0 fs/ext4/inode.c:5519
 #3: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559
 #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_write_trylock_xattr fs/ext4/xattr.h:162 [inline]
 #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_try_to_expand_extra_isize fs/ext4/inode.c:5938 [inline]
 #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: __ext4_mark_inode_dirty+0x4fb/0x810 fs/ext4/inode.c:6018

stack backtrace:
CPU: 1 PID: 2794 Comm: syz-executor543 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x177/0x211 lib/dump_stack.c:118
 print_circular_bug+0x146/0x1b0 kernel/locking/lockdep.c:2002
 check_noncircular+0x2cc/0x390 kernel/locking/lockdep.c:2123
 check_prev_add kernel/locking/lockdep.c:2988 [inline]
 check_prevs_add kernel/locking/lockdep.c:3113 [inline]
 validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729
 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955
 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566
 down_write+0x93/0x180 kernel/locking/rwsem.c:1564
 inode_lock include/linux/fs.h:782 [inline]
 ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425
 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485
 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline]
 ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline]
 ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774
 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898
 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline]
 __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018
 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562
 notify_change+0xbb6/0xe60 fs/attr.c:435
 do_truncate+0x1de/0x2c0 fs/open.c:64
 handle_truncate fs/namei.c:2970 [inline]
 do_open fs/namei.c:3311 [inline]
 path_openat+0x29f3/0x3290 fs/namei.c:3425
 do_filp_open+0x20b/0x450 fs/namei.c:3452
 do_sys_openat2+0x124/0x460 fs/open.c:1207
 do_sys_open fs/open.c:1223 [inline]
 __do_sys_open fs/open.c:1231 [inline]
 __se_sys_open fs/open.c:1227 [inline]
 __x64_sys_open+0x221/0x270 fs/open.c:1227
 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62
 entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7f0cde4ea229
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd81d1c978 EFLAGS: 00000246 ORIG_RAX: 0000000000000002
RAX: ffffffffffffffda RBX: 0030656c69662f30 RCX: 00007f0cde4ea229
RDX: 0000000000000089 RSI: 00000000000a0a00 RDI: 00000000200001c0
RBP: 2f30656c69662f2e R08: 0000000000208000 R09: 0000000000208000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd81d1c9c0
R13: 00007ffd81d1ca00 R14: 0000000000080000 R15: 0000000000000003
EXT4-fs error (device loop0): ext4_expand_extra_isize_ea:2730: inode #13: comm syz-executor543: corrupted in-inode xattr

Signed-off-by: Wojciech Gładysz <wojciech.gladysz@infogain.com>
Link: https://patch.msgid.link/20240801143827.19135-1-wojciech.gladysz@infogain.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/xattr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index b91a1d1099d59..d1d930d09cb8a 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -422,7 +422,7 @@ static int ext4_xattr_inode_iget(struct inode *parent, unsigned long ea_ino,
 		ext4_set_inode_state(inode, EXT4_STATE_LUSTRE_EA_INODE);
 		ext4_xattr_inode_set_ref(inode, 1);
 	} else {
-		inode_lock(inode);
+		inode_lock_nested(inode, I_MUTEX_XATTR);
 		inode->i_flags |= S_NOQUOTA;
 		inode_unlock(inode);
 	}
@@ -986,7 +986,7 @@ static int ext4_xattr_inode_update_ref(handle_t *handle, struct inode *ea_inode,
 	s64 ref_count;
 	int ret;
 
-	inode_lock(ea_inode);
+	inode_lock_nested(ea_inode, I_MUTEX_XATTR);
 
 	ret = ext4_reserve_inode_write(handle, ea_inode, &iloc);
 	if (ret)
-- 
2.43.0

[PATCH AUTOSEL 5.10 09/26] s390/cpum_sf: Remove WARN_ON_ONCE statements

[Sasha Levin]

From: Thomas Richter <tmricht@linux.ibm.com>

[ Upstream commit b495e710157606889f2d8bdc62aebf2aa02f67a7 ]

Remove WARN_ON_ONCE statements. These have not triggered in the
past.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/perf_cpum_sf.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index bcd31e0b4edb3..a9e05f4d0a483 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1432,7 +1432,7 @@ static int aux_output_begin(struct perf_output_handle *handle,
 	unsigned long head, base, offset;
 	struct hws_trailer_entry *te;
 
-	if (WARN_ON_ONCE(handle->head & ~PAGE_MASK))
+	if (handle->head & ~PAGE_MASK)
 		return -EINVAL;
 
 	aux->head = handle->head >> PAGE_SHIFT;
@@ -1613,7 +1613,7 @@ static void hw_collect_aux(struct cpu_hw_sf *cpuhw)
 	unsigned long num_sdb;
 
 	aux = perf_get_aux(handle);
-	if (WARN_ON_ONCE(!aux))
+	if (!aux)
 		return;
 
 	/* Inform user space new data arrived */
@@ -1635,7 +1635,7 @@ static void hw_collect_aux(struct cpu_hw_sf *cpuhw)
 					    __func__);
 			break;
 		}
-		if (WARN_ON_ONCE(!aux))
+		if (!aux)
 			return;
 
 		/* Update head and alert_mark to new position */
@@ -1870,12 +1870,8 @@ static void cpumsf_pmu_start(struct perf_event *event, int flags)
 {
 	struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf);
 
-	if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
+	if (!(event->hw.state & PERF_HES_STOPPED))
 		return;
-
-	if (flags & PERF_EF_RELOAD)
-		WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
-
 	perf_pmu_disable(event->pmu);
 	event->hw.state = 0;
 	cpuhw->lsctl.cs = 1;
-- 
2.43.0

[PATCH AUTOSEL 5.10 10/26] ktest.pl: Avoid false positives with grub2 skip regex

[Sasha Levin]

From: Daniel Jordan <daniel.m.jordan@oracle.com>

[ Upstream commit 2351e8c65404aabc433300b6bf90c7a37e8bbc4d ]

Some distros have grub2 config files with the lines

    if [ x"${feature_menuentry_id}" = xy ]; then
      menuentry_id_option="--id"
    else
      menuentry_id_option=""
    fi

which match the skip regex defined for grub2 in get_grub_index():

    $skip = '^\s*menuentry';

These false positives cause the grub number to be higher than it
should be, and the wrong kernel can end up booting.

Grub documents the menuentry command with whitespace between it and the
title, so make the skip regex reflect this.

Link: https://lore.kernel.org/20240904175530.84175-1-daniel.m.jordan@oracle.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: John 'Warthog9' Hawley (Tenstorrent) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/ktest/ktest.pl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index f72da30795dd6..f260b455b74d4 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -1985,7 +1985,7 @@ sub get_grub_index {
     } elsif ($reboot_type eq "grub2") {
 	$command = "cat $grub_file";
 	$target = '^\s*menuentry.*' . $grub_menu_qt;
-	$skip = '^\s*menuentry';
+	$skip = '^\s*menuentry\s';
 	$submenu = '^\s*submenu\s';
     } elsif ($reboot_type eq "grub2bls") {
         $command = $grub_bls_get;
-- 
2.43.0

[PATCH AUTOSEL 5.10 11/26] RDMA/mad: Improve handling of timed out WRs of mad agent

[Sasha Levin]

From: Saravanan Vajravel <saravanan.vajravel@broadcom.com>

[ Upstream commit 2a777679b8ccd09a9a65ea0716ef10365179caac ]

Current timeout handler of mad agent acquires/releases mad_agent_priv
lock for every timed out WRs. This causes heavy locking contention
when higher no. of WRs are to be handled inside timeout handler.

This leads to softlockup with below trace in some use cases where
rdma-cm path is used to establish connection between peer nodes

Trace:
-----
 BUG: soft lockup - CPU#4 stuck for 26s! [kworker/u128:3:19767]
 CPU: 4 PID: 19767 Comm: kworker/u128:3 Kdump: loaded Tainted: G OE
     -------  ---  5.14.0-427.13.1.el9_4.x86_64 #1
 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.4.8 11/26/2019
 Workqueue: ib_mad1 timeout_sends [ib_core]
 RIP: 0010:__do_softirq+0x78/0x2ac
 RSP: 0018:ffffb253449e4f98 EFLAGS: 00000246
 RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 000000000000001f
 RDX: 000000000000001d RSI: 000000003d1879ab RDI: fff363b66fd3a86b
 RBP: ffffb253604cbcd8 R08: 0000009065635f3b R09: 0000000000000000
 R10: 0000000000000040 R11: ffffb253449e4ff8 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000040
 FS:  0000000000000000(0000) GS:ffff8caa1fc80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fd9ec9db900 CR3: 0000000891934006 CR4: 00000000007706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
  <IRQ>
  ? show_trace_log_lvl+0x1c4/0x2df
  ? show_trace_log_lvl+0x1c4/0x2df
  ? __irq_exit_rcu+0xa1/0xc0
  ? watchdog_timer_fn+0x1b2/0x210
  ? __pfx_watchdog_timer_fn+0x10/0x10
  ? __hrtimer_run_queues+0x127/0x2c0
  ? hrtimer_interrupt+0xfc/0x210
  ? __sysvec_apic_timer_interrupt+0x5c/0x110
  ? sysvec_apic_timer_interrupt+0x37/0x90
  ? asm_sysvec_apic_timer_interrupt+0x16/0x20
  ? __do_softirq+0x78/0x2ac
  ? __do_softirq+0x60/0x2ac
  __irq_exit_rcu+0xa1/0xc0
  sysvec_call_function_single+0x72/0x90
  </IRQ>
  <TASK>
  asm_sysvec_call_function_single+0x16/0x20
 RIP: 0010:_raw_spin_unlock_irq+0x14/0x30
 RSP: 0018:ffffb253604cbd88 EFLAGS: 00000247
 RAX: 000000000001960d RBX: 0000000000000002 RCX: ffff8cad2a064800
 RDX: 000000008020001b RSI: 0000000000000001 RDI: ffff8cad5d39f66c
 RBP: ffff8cad5d39f600 R08: 0000000000000001 R09: 0000000000000000
 R10: ffff8caa443e0c00 R11: ffffb253604cbcd8 R12: ffff8cacb8682538
 R13: 0000000000000005 R14: ffffb253604cbd90 R15: ffff8cad5d39f66c
  cm_process_send_error+0x122/0x1d0 [ib_cm]
  timeout_sends+0x1dd/0x270 [ib_core]
  process_one_work+0x1e2/0x3b0
  ? __pfx_worker_thread+0x10/0x10
  worker_thread+0x50/0x3a0
  ? __pfx_worker_thread+0x10/0x10
  kthread+0xdd/0x100
  ? __pfx_kthread+0x10/0x10
  ret_from_fork+0x29/0x50
  </TASK>

Simplified timeout handler by creating local list of timed out WRs
and invoke send handler post creating the list. The new method acquires/
releases lock once to fetch the list and hence helps to reduce locking
contetiong when processing higher no. of WRs

Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Link: https://lore.kernel.org/r/20240722110325.195085-1-saravanan.vajravel@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/mad.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 9355e521d9f4d..521c3d050be2d 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -2631,14 +2631,16 @@ static int retry_send(struct ib_mad_send_wr_private *mad_send_wr)
 
 static void timeout_sends(struct work_struct *work)
 {
+	struct ib_mad_send_wr_private *mad_send_wr, *n;
 	struct ib_mad_agent_private *mad_agent_priv;
-	struct ib_mad_send_wr_private *mad_send_wr;
 	struct ib_mad_send_wc mad_send_wc;
+	struct list_head local_list;
 	unsigned long flags, delay;
 
 	mad_agent_priv = container_of(work, struct ib_mad_agent_private,
 				      timed_work.work);
 	mad_send_wc.vendor_err = 0;
+	INIT_LIST_HEAD(&local_list);
 
 	spin_lock_irqsave(&mad_agent_priv->lock, flags);
 	while (!list_empty(&mad_agent_priv->wait_list)) {
@@ -2656,13 +2658,16 @@ static void timeout_sends(struct work_struct *work)
 			break;
 		}
 
-		list_del(&mad_send_wr->agent_list);
+		list_del_init(&mad_send_wr->agent_list);
 		if (mad_send_wr->status == IB_WC_SUCCESS &&
 		    !retry_send(mad_send_wr))
 			continue;
 
-		spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
+		list_add_tail(&mad_send_wr->agent_list, &local_list);
+	}
+	spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
 
+	list_for_each_entry_safe(mad_send_wr, n, &local_list, agent_list) {
 		if (mad_send_wr->status == IB_WC_SUCCESS)
 			mad_send_wc.status = IB_WC_RESP_TIMEOUT_ERR;
 		else
@@ -2670,11 +2675,8 @@ static void timeout_sends(struct work_struct *work)
 		mad_send_wc.send_buf = &mad_send_wr->send_buf;
 		mad_agent_priv->agent.send_handler(&mad_agent_priv->agent,
 						   &mad_send_wc);
-
 		deref_mad_agent(mad_agent_priv);
-		spin_lock_irqsave(&mad_agent_priv->lock, flags);
 	}
-	spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
 }
 
 /*
-- 
2.43.0

[PATCH AUTOSEL 5.10 12/26] PCI: Add function 0 DMA alias quirk for Glenfly Arise chip

[Sasha Levin]

From: WangYuli <wangyuli@uniontech.com>

[ Upstream commit 9246b487ab3c3b5993aae7552b7a4c541cc14a49 ]

Add DMA support for audio function of Glenfly Arise chip, which uses
Requester ID of function 0.

Link: https://lore.kernel.org/r/CA2BBD087345B6D1+20240823095708.3237375-1-wangyuli@uniontech.com
Signed-off-by: SiyuLi <siyuli@glenfly.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
[bhelgaas: lower-case hex to match local code, drop unused Device IDs]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c      | 4 ++++
 include/linux/pci_ids.h   | 2 ++
 sound/pci/hda/hda_intel.c | 2 +-
 3 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 60a469bdc7e3e..6f782734bb6e6 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4092,6 +4092,10 @@ static void quirk_dma_func0_alias(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe832, quirk_dma_func0_alias);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe476, quirk_dma_func0_alias);
 
+/* Some Glenfly chips use function 0 as the PCIe Requester ID for DMA */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GLENFLY, 0x3d40, quirk_dma_func0_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GLENFLY, 0x3d41, quirk_dma_func0_alias);
+
 static void quirk_dma_func1_alias(struct pci_dev *dev)
 {
 	if (PCI_FUNC(dev->devfn) != 1)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index b2418bfda4a98..c4ad85bf9897f 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2657,6 +2657,8 @@
 #define PCI_DEVICE_ID_DCI_PCCOM8	0x0002
 #define PCI_DEVICE_ID_DCI_PCCOM2	0x0004
 
+#define PCI_VENDOR_ID_GLENFLY		0x6766
+
 #define PCI_VENDOR_ID_INTEL		0x8086
 #define PCI_DEVICE_ID_INTEL_EESSC	0x0008
 #define PCI_DEVICE_ID_INTEL_PXHD_0	0x0320
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index a3c6a5eeba3a4..b92095bb28c32 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2777,7 +2777,7 @@ static const struct pci_device_id azx_ids[] = {
 	  .driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS |
 	  AZX_DCAPS_PM_RUNTIME },
 	/* GLENFLY */
-	{ PCI_DEVICE(0x6766, PCI_ANY_ID),
+	{ PCI_DEVICE(PCI_VENDOR_ID_GLENFLY, PCI_ANY_ID),
 	  .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
 	  .class_mask = 0xffffff,
 	  .driver_data = AZX_DRIVER_GFHDMI | AZX_DCAPS_POSFIX_LPIB |
-- 
2.43.0

[PATCH AUTOSEL 5.10 13/26] clk: bcm: bcm53573: fix OF node leak in init

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit f92d67e23b8caa81f6322a2bad1d633b00ca000e ]

Driver code is leaking OF node reference from of_get_parent() in
bcm53573_ilp_init().  Usage of of_get_parent() is not needed in the
first place, because the parent node will not be freed while we are
processing given node (triggered by CLK_OF_DECLARE()).  Thus fix the
leak by accessing parent directly, instead of of_get_parent().

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240826065801.17081-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/bcm/clk-bcm53573-ilp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/bcm/clk-bcm53573-ilp.c b/drivers/clk/bcm/clk-bcm53573-ilp.c
index 84f2af736ee8a..83ef41d618be3 100644
--- a/drivers/clk/bcm/clk-bcm53573-ilp.c
+++ b/drivers/clk/bcm/clk-bcm53573-ilp.c
@@ -112,7 +112,7 @@ static void bcm53573_ilp_init(struct device_node *np)
 		goto err_free_ilp;
 	}
 
-	ilp->regmap = syscon_node_to_regmap(of_get_parent(np));
+	ilp->regmap = syscon_node_to_regmap(np->parent);
 	if (IS_ERR(ilp->regmap)) {
 		err = PTR_ERR(ilp->regmap);
 		goto err_free_ilp;
-- 
2.43.0

[PATCH AUTOSEL 5.10 14/26] PCI: Add ACS quirk for Qualcomm SA8775P

[Sasha Levin]

From: Subramanian Ananthanarayanan <quic_skananth@quicinc.com>

[ Upstream commit 026f84d3fa62d215b11cbeb5a5d97df941e93b5c ]

The Qualcomm SA8775P root ports don't advertise an ACS capability, but they
do provide ACS-like features to disable peer transactions and validate bus
numbers in requests.

Thus, add an ACS quirk for the SA8775P.

Link: https://lore.kernel.org/linux-pci/20240906052228.1829485-1-quic_skananth@quicinc.com
Signed-off-by: Subramanian Ananthanarayanan <quic_skananth@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 6f782734bb6e6..f0bbdc72255ed 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4920,6 +4920,8 @@ static const struct pci_dev_acs_enabled {
 	/* QCOM QDF2xxx root ports */
 	{ PCI_VENDOR_ID_QCOM, 0x0400, pci_quirk_qcom_rp_acs },
 	{ PCI_VENDOR_ID_QCOM, 0x0401, pci_quirk_qcom_rp_acs },
+	/* QCOM SA8775P root port */
+	{ PCI_VENDOR_ID_QCOM, 0x0115, pci_quirk_qcom_rp_acs },
 	/* HXT SD4800 root ports. The ACS design is same as QCOM QDF2xxx */
 	{ PCI_VENDOR_ID_HXT, 0x0401, pci_quirk_qcom_rp_acs },
 	/* Intel PCH root ports */
-- 
2.43.0

[PATCH AUTOSEL 5.10 15/26] i2c: i801: Use a different adapter-name for IDF adapters

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 43457ada98c824f310adb7bd96bd5f2fcd9a3279 ]

On chipsets with a second 'Integrated Device Function' SMBus controller use
a different adapter-name for the second IDF adapter.

This allows platform glue code which is looking for the primary i801
adapter to manually instantiate i2c_clients on to differentiate
between the 2.

This allows such code to find the primary i801 adapter by name, without
needing to duplicate the PCI-ids to feature-flags mapping from i2c-i801.c.

Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-i801.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 4baa9bce02b67..3d5ef84482b25 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1895,8 +1895,15 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	i801_add_tco(priv);
 
+	/*
+	 * adapter.name is used by platform code to find the main I801 adapter
+	 * to instantiante i2c_clients, do not change.
+	 */
 	snprintf(priv->adapter.name, sizeof(priv->adapter.name),
-		"SMBus I801 adapter at %04lx", priv->smba);
+		 "SMBus %s adapter at %04lx",
+		 (priv->features & FEATURE_IDF) ? "I801 IDF" : "I801",
+		 priv->smba);
+
 	err = i2c_add_adapter(&priv->adapter);
 	if (err) {
 		platform_device_unregister(priv->tco_pdev);
-- 
2.43.0

[PATCH AUTOSEL 5.10 16/26] PCI: Mark Creative Labs EMU20k2 INTx masking as broken

[Sasha Levin]

From: Alex Williamson <alex.williamson@redhat.com>

[ Upstream commit 2910306655a7072640021563ec9501bfa67f0cb1 ]

Per user reports, the Creative Labs EMU20k2 (Sound Blaster X-Fi
Titanium Series) generates spurious interrupts when used with
vfio-pci unless DisINTx masking support is disabled.

Thus, quirk the device to mark INTx masking as broken.

Closes: https://lore.kernel.org/all/VI1PR10MB8207C507DB5420AB4C7281E0DB9A2@VI1PR10MB8207.EURPRD10.PROD.OUTLOOK.COM
Link: https://lore.kernel.org/linux-pci/20240912215331.839220-1-alex.williamson@redhat.com
Reported-by: zdravko delineshev <delineshev@outlook.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index f0bbdc72255ed..86b91f8da1caa 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3454,6 +3454,8 @@ DECLARE_PCI_FIXUP_FINAL(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */
 			quirk_broken_intx_masking);
 DECLARE_PCI_FIXUP_FINAL(0x1b7c, 0x0004, /* Ceton InfiniTV4 */
 			quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_20K2,
+			quirk_broken_intx_masking);
 
 /*
  * Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10)
-- 
2.43.0

[PATCH AUTOSEL 5.10 17/26] ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition

[Sasha Levin]

From: Kaixin Wang <kxwang23@m.fudan.edu.cn>

[ Upstream commit e51aded92d42784313ba16c12f4f88cc4f973bbb ]

In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev
function, then &sndev->check_link_status_work is bound with
check_link_status_work. switchtec_ntb_link_notification may be called
to start the work.

If we remove the module which will call switchtec_ntb_remove to make
cleanup, it will free sndev through kfree(sndev), while the work
mentioned above will be used. The sequence of operations that may lead
to a UAF bug is as follows:

CPU0                                 CPU1

                        | check_link_status_work
switchtec_ntb_remove    |
kfree(sndev);           |
                        | if (sndev->link_force_down)
                        | // use sndev

Fix it by ensuring that the work is canceled before proceeding with
the cleanup in switchtec_ntb_remove.

Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
index 4c6eb61a6ac62..ad09946100b56 100644
--- a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
+++ b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
@@ -1558,6 +1558,7 @@ static void switchtec_ntb_remove(struct device *dev,
 	switchtec_ntb_deinit_db_msg_irq(sndev);
 	switchtec_ntb_deinit_shared_mw(sndev);
 	switchtec_ntb_deinit_crosslink(sndev);
+	cancel_work_sync(&sndev->check_link_status_work);
 	kfree(sndev);
 	dev_info(dev, "ntb device unregistered\n");
 }
-- 
2.43.0

[PATCH AUTOSEL 5.10 18/26] media: videobuf2-core: clear memory related fields in __vb2_plane_dmabuf_put()

[Sasha Levin]

From: Yunke Cao <yunkec@chromium.org>

[ Upstream commit 6a9c97ab6b7e85697e0b74e86062192a5ffffd99 ]

Clear vb2_plane's memory related fields in __vb2_plane_dmabuf_put(),
including bytesused, length, fd and data_offset.

Remove the duplicated code in __prepare_dmabuf().

Signed-off-by: Yunke Cao <yunkec@chromium.org>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/common/videobuf2/videobuf2-core.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c
index 3bafde87a1257..78ad2b278da4c 100644
--- a/drivers/media/common/videobuf2/videobuf2-core.c
+++ b/drivers/media/common/videobuf2/videobuf2-core.c
@@ -301,6 +301,10 @@ static void __vb2_plane_dmabuf_put(struct vb2_buffer *vb, struct vb2_plane *p)
 	p->mem_priv = NULL;
 	p->dbuf = NULL;
 	p->dbuf_mapped = 0;
+	p->bytesused = 0;
+	p->length = 0;
+	p->m.fd = 0;
+	p->data_offset = 0;
 }
 
 /*
@@ -1278,10 +1282,6 @@ static int __prepare_dmabuf(struct vb2_buffer *vb)
 
 		/* Release previously acquired memory if present */
 		__vb2_plane_dmabuf_put(vb, &vb->planes[plane]);
-		vb->planes[plane].bytesused = 0;
-		vb->planes[plane].length = 0;
-		vb->planes[plane].m.fd = 0;
-		vb->planes[plane].data_offset = 0;
 
 		/* Acquire each plane's memory */
 		mem_priv = call_ptr_memop(vb, attach_dmabuf,
-- 
2.43.0

[PATCH AUTOSEL 5.10 19/26] clk: imx: Remove CLK_SET_PARENT_GATE for DRAM mux for i.MX7D

[Sasha Levin]

From: Peng Fan <peng.fan@nxp.com>

[ Upstream commit a54c441b46a0745683c2eef5a359d22856d27323 ]

For i.MX7D DRAM related mux clock, the clock source change should ONLY
be done done in low level asm code without accessing DRAM, and then
calling clk API to sync the HW clock status with clk tree, it should never
touch real clock source switch via clk API, so CLK_SET_PARENT_GATE flag
should NOT be added, otherwise, DRAM's clock parent will be disabled when
DRAM is active, and system will hang.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-8-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/imx/clk-imx7d.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index 3f6fd7ef2a68f..0e68e5f2d7e7d 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -498,9 +498,9 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
 	hws[IMX7D_ENET_AXI_ROOT_SRC] = imx_clk_hw_mux2_flags("enet_axi_src", base + 0x8900, 24, 3, enet_axi_sel, ARRAY_SIZE(enet_axi_sel), CLK_SET_PARENT_GATE);
 	hws[IMX7D_NAND_USDHC_BUS_ROOT_SRC] = imx_clk_hw_mux2_flags("nand_usdhc_src", base + 0x8980, 24, 3, nand_usdhc_bus_sel, ARRAY_SIZE(nand_usdhc_bus_sel), CLK_SET_PARENT_GATE);
 	hws[IMX7D_DRAM_PHYM_ROOT_SRC] = imx_clk_hw_mux2_flags("dram_phym_src", base + 0x9800, 24, 1, dram_phym_sel, ARRAY_SIZE(dram_phym_sel), CLK_SET_PARENT_GATE);
-	hws[IMX7D_DRAM_ROOT_SRC] = imx_clk_hw_mux2_flags("dram_src", base + 0x9880, 24, 1, dram_sel, ARRAY_SIZE(dram_sel), CLK_SET_PARENT_GATE);
+	hws[IMX7D_DRAM_ROOT_SRC] = imx_clk_hw_mux2("dram_src", base + 0x9880, 24, 1, dram_sel, ARRAY_SIZE(dram_sel));
 	hws[IMX7D_DRAM_PHYM_ALT_ROOT_SRC] = imx_clk_hw_mux2_flags("dram_phym_alt_src", base + 0xa000, 24, 3, dram_phym_alt_sel, ARRAY_SIZE(dram_phym_alt_sel), CLK_SET_PARENT_GATE);
-	hws[IMX7D_DRAM_ALT_ROOT_SRC]  = imx_clk_hw_mux2_flags("dram_alt_src", base + 0xa080, 24, 3, dram_alt_sel, ARRAY_SIZE(dram_alt_sel), CLK_SET_PARENT_GATE);
+	hws[IMX7D_DRAM_ALT_ROOT_SRC]  = imx_clk_hw_mux2("dram_alt_src", base + 0xa080, 24, 3, dram_alt_sel, ARRAY_SIZE(dram_alt_sel));
 	hws[IMX7D_USB_HSIC_ROOT_SRC] = imx_clk_hw_mux2_flags("usb_hsic_src", base + 0xa100, 24, 3, usb_hsic_sel, ARRAY_SIZE(usb_hsic_sel), CLK_SET_PARENT_GATE);
 	hws[IMX7D_PCIE_CTRL_ROOT_SRC] = imx_clk_hw_mux2_flags("pcie_ctrl_src", base + 0xa180, 24, 3, pcie_ctrl_sel, ARRAY_SIZE(pcie_ctrl_sel), CLK_SET_PARENT_GATE);
 	hws[IMX7D_PCIE_PHY_ROOT_SRC] = imx_clk_hw_mux2_flags("pcie_phy_src", base + 0xa200, 24, 3, pcie_phy_sel, ARRAY_SIZE(pcie_phy_sel), CLK_SET_PARENT_GATE);
-- 
2.43.0

[PATCH AUTOSEL 5.10 20/26] usb: chipidea: udc: enable suspend interrupt after usb reset

[Sasha Levin]

From: Xu Yang <xu.yang_2@nxp.com>

[ Upstream commit e4fdcc10092fb244218013bfe8ff01c55d54e8e4 ]

Currently, suspend interrupt is enabled before pullup enable operation.
This will cause a suspend interrupt assert right after pullup DP. This
suspend interrupt is meaningless, so this will ignore such interrupt
by enable it after usb reset completed.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20240823073832.1702135-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/chipidea/udc.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 67d8da04848ec..5cdf03534c0c7 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -83,7 +83,7 @@ static int hw_device_state(struct ci_hdrc *ci, u32 dma)
 		hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
 		/* interrupt, error, port change, reset, sleep/suspend */
 		hw_write(ci, OP_USBINTR, ~0,
-			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
+			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI);
 	} else {
 		hw_write(ci, OP_USBINTR, ~0, 0);
 	}
@@ -862,6 +862,7 @@ __releases(ci->lock)
 __acquires(ci->lock)
 {
 	int retval;
+	u32 intr;
 
 	spin_unlock(&ci->lock);
 	if (ci->gadget.speed != USB_SPEED_UNKNOWN)
@@ -875,6 +876,11 @@ __acquires(ci->lock)
 	if (retval)
 		goto done;
 
+	/* clear SLI */
+	hw_write(ci, OP_USBSTS, USBi_SLI, USBi_SLI);
+	intr = hw_read(ci, OP_USBINTR, ~0);
+	hw_write(ci, OP_USBINTR, ~0, intr | USBi_SLI);
+
 	ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
 	if (ci->status == NULL)
 		retval = -ENOMEM;
-- 
2.43.0

[PATCH AUTOSEL 5.10 21/26] usb: dwc2: Adjust the timing of USB Driver Interrupt Registration in the Crashkernel Scenario

[Sasha Levin]

From: Shawn Shao <shawn.shao@jaguarmicro.com>

[ Upstream commit 4058c39bd176daf11a826802d940d86292a6b02b ]

The issue is that before entering the crash kernel, the DWC USB controller
did not perform operations such as resetting the interrupt mask bits.
After entering the crash kernel,before the USB interrupt handler
registration was completed while loading the DWC USB driver,an GINTSTS_SOF
interrupt was received.This triggered the misroute_irq process within the
GIC handling framework,ultimately leading to the misrouting of the
interrupt,causing it to be handled by the wrong interrupt handler
and resulting in the issue.

Summary:In a scenario where the kernel triggers a panic and enters
the crash kernel,it is necessary to ensure that the interrupt mask
bit is not enabled before the interrupt registration is complete.
If an interrupt reaches the CPU at this moment,it will certainly
not be handled correctly,especially in cases where this interrupt
is reported frequently.

Please refer to the Crashkernel dmesg information as follows
(the message on line 3 was added before devm_request_irq is
called by the dwc2_driver_probe function):
[    5.866837][    T1] dwc2 JMIC0010:01: supply vusb_d not found, using dummy regulator
[    5.874588][    T1] dwc2 JMIC0010:01: supply vusb_a not found, using dummy regulator
[    5.882335][    T1] dwc2 JMIC0010:01: before devm_request_irq  irq: [71], gintmsk[0xf300080e], gintsts[0x04200009]
[    5.892686][    C0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-jmnd1.2_RC #18
[    5.900327][    C0] Hardware name: CMSS HyperCard4-25G/HyperCard4-25G, BIOS 1.6.4 Jul  8 2024
[    5.908836][    C0] Call trace:
[    5.911965][    C0]  dump_backtrace+0x0/0x1f0
[    5.916308][    C0]  show_stack+0x20/0x30
[    5.920304][    C0]  dump_stack+0xd8/0x140
[    5.924387][    C0]  pcie_xxx_handler+0x3c/0x1d8
[    5.930121][    C0]  __handle_irq_event_percpu+0x64/0x1e0
[    5.935506][    C0]  handle_irq_event+0x80/0x1d0
[    5.940109][    C0]  try_one_irq+0x138/0x174
[    5.944365][    C0]  misrouted_irq+0x134/0x140
[    5.948795][    C0]  note_interrupt+0x1d0/0x30c
[    5.953311][    C0]  handle_irq_event+0x13c/0x1d0
[    5.958001][    C0]  handle_fasteoi_irq+0xd4/0x260
[    5.962779][    C0]  __handle_domain_irq+0x88/0xf0
[    5.967555][    C0]  gic_handle_irq+0x9c/0x2f0
[    5.971985][    C0]  el1_irq+0xb8/0x140
[    5.975807][    C0]  __setup_irq+0x3dc/0x7cc
[    5.980064][    C0]  request_threaded_irq+0xf4/0x1b4
[    5.985015][    C0]  devm_request_threaded_irq+0x80/0x100
[    5.990400][    C0]  dwc2_driver_probe+0x1b8/0x6b0
[    5.995178][    C0]  platform_drv_probe+0x5c/0xb0
[    5.999868][    C0]  really_probe+0xf8/0x51c
[    6.004125][    C0]  driver_probe_device+0xfc/0x170
[    6.008989][    C0]  device_driver_attach+0xc8/0xd0
[    6.013853][    C0]  __driver_attach+0xe8/0x1b0
[    6.018369][    C0]  bus_for_each_dev+0x7c/0xdc
[    6.022886][    C0]  driver_attach+0x2c/0x3c
[    6.027143][    C0]  bus_add_driver+0xdc/0x240
[    6.031573][    C0]  driver_register+0x80/0x13c
[    6.036090][    C0]  __platform_driver_register+0x50/0x5c
[    6.041476][    C0]  dwc2_platform_driver_init+0x24/0x30
[    6.046774][    C0]  do_one_initcall+0x50/0x25c
[    6.051291][    C0]  do_initcall_level+0xe4/0xfc
[    6.055894][    C0]  do_initcalls+0x80/0xa4
[    6.060064][    C0]  kernel_init_freeable+0x198/0x240
[    6.065102][    C0]  kernel_init+0x1c/0x12c

Signed-off-by: Shawn Shao <shawn.shao@jaguarmicro.com>
Link: https://lore.kernel.org/r/20240830031709.134-1-shawn.shao@jaguarmicro.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc2/platform.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 9d0dd09a20151..f421650cfa03e 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -441,18 +441,6 @@ static int dwc2_driver_probe(struct platform_device *dev)
 
 	spin_lock_init(&hsotg->lock);
 
-	hsotg->irq = platform_get_irq(dev, 0);
-	if (hsotg->irq < 0)
-		return hsotg->irq;
-
-	dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
-		hsotg->irq);
-	retval = devm_request_irq(hsotg->dev, hsotg->irq,
-				  dwc2_handle_common_intr, IRQF_SHARED,
-				  dev_name(hsotg->dev), hsotg);
-	if (retval)
-		return retval;
-
 	hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
 	if (IS_ERR(hsotg->vbus_supply)) {
 		retval = PTR_ERR(hsotg->vbus_supply);
@@ -496,6 +484,20 @@ static int dwc2_driver_probe(struct platform_device *dev)
 	if (retval)
 		goto error;
 
+	hsotg->irq = platform_get_irq(dev, 0);
+	if (hsotg->irq < 0) {
+		retval = hsotg->irq;
+		goto error;
+	}
+
+	dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
+		hsotg->irq);
+	retval = devm_request_irq(hsotg->dev, hsotg->irq,
+				  dwc2_handle_common_intr, IRQF_SHARED,
+				  dev_name(hsotg->dev), hsotg);
+	if (retval)
+		goto error;
+
 	/*
 	 * For OTG cores, set the force mode bits to reflect the value
 	 * of dr_mode. Force mode bits should not be touched at any
-- 
2.43.0

[PATCH AUTOSEL 5.10 22/26] virtio_pmem: Check device status before requesting flush

[Sasha Levin]

From: Philip Chen <philipchen@chromium.org>

[ Upstream commit e25fbcd97cf52c3c9824d44b5c56c19673c3dd50 ]

If a pmem device is in a bad status, the driver side could wait for
host ack forever in virtio_pmem_flush(), causing the system to hang.

So add a status check in the beginning of virtio_pmem_flush() to return
early if the device is not activated.

Signed-off-by: Philip Chen <philipchen@chromium.org>
Message-Id: <20240826215313.2673566-1-philipchen@chromium.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvdimm/nd_virtio.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/nvdimm/nd_virtio.c b/drivers/nvdimm/nd_virtio.c
index 10351d5b49fac..41e97c6567cf9 100644
--- a/drivers/nvdimm/nd_virtio.c
+++ b/drivers/nvdimm/nd_virtio.c
@@ -44,6 +44,15 @@ static int virtio_pmem_flush(struct nd_region *nd_region)
 	unsigned long flags;
 	int err, err1;
 
+	/*
+	 * Don't bother to submit the request to the device if the device is
+	 * not activated.
+	 */
+	if (vdev->config->get_status(vdev) & VIRTIO_CONFIG_S_NEEDS_RESET) {
+		dev_info(&vdev->dev, "virtio pmem device needs a reset\n");
+		return -EIO;
+	}
+
 	might_sleep();
 	req_data = kmalloc(sizeof(*req_data), GFP_KERNEL);
 	if (!req_data)
-- 
2.43.0

[PATCH AUTOSEL 5.10 23/26] tools/iio: Add memory allocation failure check for trigger_name

[Sasha Levin]

From: Zhu Jun <zhujun2@cmss.chinamobile.com>

[ Upstream commit 3c6b818b097dd6932859bcc3d6722a74ec5931c1 ]

Added a check to handle memory allocation failure for `trigger_name`
and return `-ENOMEM`.

Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://patch.msgid.link/20240828093129.3040-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/iio/iio_generic_buffer.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/tools/iio/iio_generic_buffer.c b/tools/iio/iio_generic_buffer.c
index 2fd10eab75b53..5ef09ac6e7cf7 100644
--- a/tools/iio/iio_generic_buffer.c
+++ b/tools/iio/iio_generic_buffer.c
@@ -479,6 +479,10 @@ int main(int argc, char **argv)
 			return -ENOMEM;
 		}
 		trigger_name = malloc(IIO_MAX_NAME_LENGTH);
+		if (!trigger_name) {
+			ret = -ENOMEM;
+			goto error;
+		}
 		ret = read_sysfs_string("name", trig_dev_name, trigger_name);
 		free(trig_dev_name);
 		if (ret < 0) {
-- 
2.43.0

[PATCH AUTOSEL 5.10 24/26] driver core: bus: Return -EIO instead of 0 when show/store invalid bus attribute

[Sasha Levin]

From: Zijun Hu <quic_zijuhu@quicinc.com>

[ Upstream commit c0fd973c108cdc22a384854bc4b3e288a9717bb2 ]

Return -EIO instead of 0 for below erroneous bus attribute operations:
 - read a bus attribute without show().
 - write a bus attribute without store().

Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20240724-bus_fix-v2-1-5adbafc698fb@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/bus.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index df85e928b97f2..47ab755aee949 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -104,7 +104,8 @@ static ssize_t bus_attr_show(struct kobject *kobj, struct attribute *attr,
 {
 	struct bus_attribute *bus_attr = to_bus_attr(attr);
 	struct subsys_private *subsys_priv = to_subsys_private(kobj);
-	ssize_t ret = 0;
+	/* return -EIO for reading a bus attribute without show() */
+	ssize_t ret = -EIO;
 
 	if (bus_attr->show)
 		ret = bus_attr->show(subsys_priv->bus, buf);
@@ -116,7 +117,8 @@ static ssize_t bus_attr_store(struct kobject *kobj, struct attribute *attr,
 {
 	struct bus_attribute *bus_attr = to_bus_attr(attr);
 	struct subsys_private *subsys_priv = to_subsys_private(kobj);
-	ssize_t ret = 0;
+	/* return -EIO for writing a bus attribute without store() */
+	ssize_t ret = -EIO;
 
 	if (bus_attr->store)
 		ret = bus_attr->store(subsys_priv->bus, buf, count);
-- 
2.43.0

[PATCH AUTOSEL 5.10 25/26] drm/amd/display: Check null pointer before dereferencing se

[Sasha Levin]

From: Alex Hung <alex.hung@amd.com>

[ Upstream commit ff599ef6970ee000fa5bc38d02fa5ff5f3fc7575 ]

[WHAT & HOW]
se is null checked previously in the same function, indicating
it might be null; therefore, it must be checked when used again.

This fixes 1 FORWARD_NULL issue reported by Coverity.

Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 272252cd05001..f3fc9b44b4601 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -1258,7 +1258,7 @@ bool dc_validate_seamless_boot_timing(const struct dc *dc,
 		if (crtc_timing->pix_clk_100hz != pix_clk_100hz)
 			return false;
 
-		if (!se->funcs->dp_get_pixel_format)
+		if (!se || !se->funcs->dp_get_pixel_format)
 			return false;
 
 		if (!se->funcs->dp_get_pixel_format(
-- 
2.43.0

[PATCH AUTOSEL 5.10 26/26] fbdev: sisfb: Fix strbuf array overflow

[Sasha Levin]

From: Andrey Shumilin <shum.sdl@nppct.ru>

[ Upstream commit 9cf14f5a2746c19455ce9cb44341b5527b5e19c3 ]

The values of the variables xres and yres are placed in strbuf.
These variables are obtained from strbuf1.
The strbuf1 array contains digit characters
and a space if the array contains non-digit characters.
Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres);
more than 16 bytes will be written to strbuf.
It is suggested to increase the size of the strbuf array to 24.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Andrey Shumilin <shum.sdl@nppct.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/sis/sis_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/sis/sis_main.c b/drivers/video/fbdev/sis/sis_main.c
index e540cb0c51726..7787fd21932cb 100644
--- a/drivers/video/fbdev/sis/sis_main.c
+++ b/drivers/video/fbdev/sis/sis_main.c
@@ -183,7 +183,7 @@ static void sisfb_search_mode(char *name, bool quiet)
 {
 	unsigned int j = 0, xres = 0, yres = 0, depth = 0, rate = 0;
 	int i = 0;
-	char strbuf[16], strbuf1[20];
+	char strbuf[24], strbuf1[20];
 	char *nameptr = name;
 
 	/* We don't know the hardware specs yet and there is no ivideo */
-- 
2.43.0